Optimization of Pigment Extraction from Red Beet

Document Type : Research Article

Authors

• Mahshad Lavarsetagh
• Nafiseh Zamindar
• Yasaman Esmaeili

Department of Food Science and Technology, College of Agriculture, Isfahan (Khorasgan) Branch, Islamic Azad University, Isfahan, Iran

https://doi.org/10.22067/ifstrj.2023.81079.1235

Abstract

Introduction 
The first quality attribute about food evaluated by consumer is visual characteristics. The apparent attributes of a product include its shape, color, packaging, size, and uniformity. The consumer considers the product's appearance in the first step before any other information about other characteristics, such as taste or smell, especially in the first purchase. Color is the most crucial indicator of the quality of food that affects consumer acceptance. To replace the color lost during the process, increasing the existing color and minimizing variation during processing; natural colors, synthetic and inorganic colorants are added to food. Red beet is one of the most important natural sources of color; the essential pigment in this plant is betalain, composed of two subunits, betacyanin, and betaxantine. Considering the growing demand to develop more effective methods for extracting active compounds present in vegetable materials, including naturally occurring betalain and other nutritious compounds, this research was conducted to optimize the extraction conditions of this pigment from red beet.
 
Materials and Methods 
Preparation of red beet 
The red beets were washed, peeled, and grated to prepare the sample. Then, red beets were dried in an oven at 30 °C for 48 hours and milled. For extraction, 10 grams of red beet powder was mixed with 200 ml of solvent (water-ethanol in a ratio of 1:1) and subjected to ultrasonication at 37 kHz. Experiments in 27 runs were performed based on a historical data design, randomized subtype and quadratic model. After the implementation with the edition of Design Expert 7 software, the range of variables pH (3-5), temperature (15-25 °C), and time (10-20 min) were applied for extraction. The pulp was dried using a Wattman filter paper in an oven at 35 °C and used for subsequent tests. 
 
Yield measurements 
The efficiency of the extraction process was calculated by dividing the weight of the extract obtained by the weight of the beetroot. 
 
Measurement of pigments 
The betacyanin and betaxanthine pigments show maximum absorption in 522-559 nm and 474-480 nm, respectively. To measure betacyanin and betaxanthine in extracts, a certain amount of powder was dissolved in distilled water, and its absorbance was measured at  530 and 480 nm. The amount of pigments obtained from different extraction conditions was compared.
 
 
Results and Discussion  
In this study, the overall results showed that an increase in the extraction pH and time increased the extraction of betacyanine and betaxanthine. It would be better to extract betacyanine at temperatures below 25 °C since this pigment is sensitive to high temperatures. The maximum yield was observed when pH value, temperature, and time were 5, 21 °C, and 20 min, respectively. Comparison of experimental and predicted values of the proposed responses at the proposed optimal points by t-test showed no significant difference (p<0.05). A quadratic model was suggested for the responses, and the lack of fit was not significant (p<0.05). The extraction of betaline from red beet using the ultrasonic assisted method causes a reduction in time, temperature, energy, and solvent consumption.
 
Conclusion
The maximum yield was observed when pH value, temperature, and time were 5, 21 °C, and 20 min, respectively. Comparison of experimental and predicted values of the optimal points showed no significant difference by t-test (p<0.05). According to the results obtained from this research, ultrasonic assisted extraction can be considered an efficient and fast method. Extraction of betalain from red beetroot with ultrasonic assisted method is more efficient. It can replace the regular practice of extraction in the industry due to the reduction of time, temperature, energy, and solvent consumption, thus reducing cost and increasing profit.

Keywords

• Betacyanine
• Betaxanthin
• Red beet
• Response surface method

Main Subjects

• Food Technology

©2023 The author(s). This is an open access article distributed under Creative Commons Attribution 4.0 International License (CC BY 4.0).

References

1. Aberoumand, A. (2011). A review article on edible pigments properties and sources as natural biocolorants in foodstuff and food industry. World Journal Dairy Food Science, 6(1), 71-78.
2. Bas, D., & Boyac, I. (2007). Modeling and optimization II: Comparison of estimation capabilities of response surface methodology with artificial neural networks in a biochemical reaction. Journal of Food Engineering, 78, 846-854. https://doi.org/10.1016/j.jfoodeng.2005.11.025
3. Cardoso-Ugarte, G., Sosa-Morales, M., Ballard, T., Liceaga, A., & San Martín-González, M. (2014). Microwave-assisted extraction of betalains from red beet (Beta vulgaris). LWT-Food Science and Technology, 59(1), 276-282. https://doi.org/10.1016/j.lwt.2014.05.025
4. Changizi-Ashtiyani S, Ramezani, M., Poorcheraghi, H., Afzali, S.M., Pirouzi, P., & Atashi, S. (2019). The effectiveness of Rosa canina plant in treatment of some diseases: A brief review. Journal Arak University Medicenal Science; 22(5), 6-17. https://doi.org/10.32598/JAMS.22.5.6
5. De Sotillo, D.R., Hadley, M., & Holm, E. (1994). Phenolics in aqueous potato peel extract: extraction, identification and degradation. Journal of Food Science, 59(3), 649-651. https://doi.org/10.1111/j.1365-2621.1994.tb05584.x
6. Delgado-Vargas, F., Jiménez, A., & Paredes-López, O. (2000). Natural pigments: carotenoids, anthocyanins, and betalains—characteristics, biosynthesis, processing, and stability. Critical reviews in Food Science and Nutrition, 40(3), 173-289. https://doi.org/10.1080/10408690091189257
7. Downham, A., & Collins, P. (2000). Colouring our foods in the last and next millennium. International Journal of Food Science & Technology, 35(1), 5-22. https://doi.org/10.1046/j.1365-2621.2000.00373.x
8. Escribano, J., Pedreño, M.A., García‐Carmona, F., & Muñoz, R. (1998). Characterization of the antiradical activity of betalains from Beta vulgaris roots. Phytochemical Analysis: An International Journal of Plant Chemical and Biochemical Techniques, 9(3), 124-127.
9. Esmaeili, Y., Zamindar, N., Paidari, S., Ibrahim, S.A., & Mohammadi Nafchi, A. (2021). The synergistic effects of aloe vera gel and modified atmosphere packaging on the quality of strawberry fruit. Journal of Food Processing and Preservation, 45(12), e16003. https://doi.org/10.1111/jfpp.16003
10. Fakhari, A.R., & Baghipour, S. (2009). Extraction of a food colorant from red beet and evaluation of its stability. Journal of Color Science and Technology, 3(4), 243-250.
11. Hendry, G.A.F., & Houghton, J. (1996). Natural food colorants: Springer Science & Business Media.
12. Kooshesh, S., & Golmakani, M.T. (2015). Optimization of microwave-assisted extraction of betalains from red beet (Beta vulgaris) and evaluation the antioxidant activity of obtained. Electronic Journal of Food Processing and Preservation, 7(2), 39-60.
13. Laqui-Vilca, C., Aguilar-Tuesta, S., Mamani-Navarro, W., Montaño-Bustamante, J., & Condezo-Hoyos, L. (2018). Ultrasound-assisted optimal extraction and thermal stability of betalains from colored quinoa (Chenopodium quinoa Willd) hulls. Industrial Crops and Products, 111, 606-614. https://doi.org/10.1016/j.indcrop.2017.11.034
14. Lee, W., Yusof, S., Hamid, N., & Baharin, B. (2006). Optimizing conditions for hot water extraction of banana juice using response surface methodology (RSM). Journal of Food Engineering, 75(4), 473-479. https://doi.org/10.1016/j.jfoodeng.2005.04.062
15. Maran, J.P., Manikandan, S., & Mekala, V. (2013). Modeling and optimization of betalain extraction from Opuntia ficus-indica using Box–Behnken design with desirability function. Industrial Crops and Products, 49, 304-311. https://doi.org/10.1016/j.indcrop.2013.05.012
16. Pavlov, A., Georgiev, V., & Ilieva, M. (2005). Betalain biosynthesis by red beet (Beta vulgaris ) hairy root culture. Process Biochemistry, 40(5), 1531-1533. https://doi.org/10.1016/j.procbio.2004.01.001
17. Ranjbar Nedamani, A. (2022). Stability enhancement of natural food colorants- A review. Research and Innovation in Food Science and Technology, 10(4), 369-388. https://doi.org/10.22101/JRIFST.2022.277772.1235
18. Righi Pessoa da Silva, H., da Silva, C., & Bolanho, B.C. (2018). Ultrasonic‐assisted extraction of betalains from red beet (Beta vulgaris ). Journal of Food Process Engineering, 41(6), p.e12833. https://doi.org/10.1111/jfpe.12833
19. Stintzing, F.C., & Carle, R. (2004). Functional properties of anthocyanins and betalains in plants, food, and in human nutrition. Trends in Food Science & Technology, 15(1), 19-38. https://doi.org/10.1016/j.tifs.2003.07.004
20. Zohuri, A., Tabatabai Yazdi, F., Mortazavi, S.A., & Shahidi, F. (2016). Comparison of efficiency and extraction of color and natural compounds from red beet by maceration and ultrasonic extraction methods. Journal of Food Science and Technology (Iran), 13(52), 47-54.