بهینه‌سازی فرآیند تولید سس هوادهی شده کم‌چرب به روش سطح پاسخ و ارزیابی ویژگی‌های فیزیکوشیمیایی و حسی آن

نوع مقاله : مقاله پژوهشی

نویسندگان

• سیده فریناز صارم نژاد نمینی
• محبت محبی
• آرش کوچکی

گروه صنایع غذایی، دانشکده کشاورزی، دانشگاه فردوسی مشهد، مشهد، ایران

https://doi.org/10.22067/ifstrj.v18i1.86882

چکیده

در این مطالعه روش جدید آمادهسازی امولسیون‌های هوا در روغن (کف‌های روغنی) به‌منظور جایگزینی قطره‌های چربی با حباب‌های هوا ارائه شده، اثر غلظت سورفکتانت، سرعت و زمان هوادهی بر میزان تولید و پایداری کف‌ها بررسی شد. شرایط بهینه تولید (هوادهی مخلوط 10 درصد وزنی سورفکتانت با سرعت 3400 دور در دقیقه به مدت 15 دقیقه) با روش سطح پاسخ تعیین و کف‌ها برای تولید سس هوادهی شده آماده شدند. لینولئیک اسید به‌عنوان محرک مزه چربی (صفر و 3 میلی مولار) به سس‌ها اضافه و ویژگی‌های فیزیکوشیمیایی و حسی آن‌ها با سس‌های تجاری مقایسه شد. اسیدیته و pH نمونه‌ها در محدوده استاندارد قرار داشتند. بیشترین میزان pH مربوط به سس تجاری پرچرب بود (0001/0p<). سس تجاری بدون چربی با کم‌ترین میزان pH، اختلاف معنی‌داری با بقیه نداشت (05/0p>). بین pH سس‌های هوادهی شده (شاهد و حاوی لینولئیک اسید) اختلافی مشاهده نشد. اگرچه با گذشت زمان pH این سس‌ها کمی کاهش یافت، اما این تغییر معنی‌دار نبود (05/0p>). اعداد پراکسید و مقادیر مالون دی آلدهید نمونه‌های هوادهی شده و تجاری کم‌چرب در مدت هفت روز اختلافی با یکدیگر نداشتند (05/0p>). به‌طورکلی، روند اکسیداسیون سس پرچرب بسیار سریع‌تر از سایر نمونه‌ها بود. ظاهر، طعم و ویژگی‌های بافتی و پذیرش کلی محصولات هوادهی شده و نمونه‌های تجاری ارزیابی شد. پذیرش کلی سس هوادهی شده شاهد با سس حاوی لینولئیک اسید اختلاف قابل توجهی داشت (001/0p <)، اما پذیرش کلی نمونه حاوی لینولئیک اسید با سس‌های تجاری کم‌چرب و پرچرب معنی‌دار نبود (05/0p>). بر اساس این نتایج جایگزینی حباب‌های هوا و نیز افزودن محرک مزه چربی در چارچوب برنامه‌های کاهش چربی، می‌تواند تغییرات حسی موثر بر پذیرش مصرف‌کنندگان را به حداقل برساند.

کلیدواژه‌ها

• سس
• امولسیون
• کف روغنی
• بهینه‌سازی
• لینولئیک اسید

موضوعات

• فناوری مواد غذایی

عنوان مقاله [English]

Optimization of reduced-fat aerated sauce production process by response surface methodology and evaluation of its physicochemical and sensory properties

نویسندگان [English]

• Farinaz Saremnejad
• Mohebbat Mohebbi
• Arash Koocheki

Department of Food Science and Technology, Faculty of Agriculture, Ferdowsi University of Mashhad, Mashhad, Iran

چکیده [English]

 
Introduction: Increasing diet-linked diseases and following that the consumers ongoing desire for healthier foods makes reduced-fat products of outstanding importance in the food industry. This study aims to reduce the fat content of sauces as a traditional condiment through the incorporation of air bubbles in the oil phase. Response surface methodology (RSM) was used for identifying the effect of aeration process variables on foam properties. However, the main challenge of reduced-fat foods is to ensure their acceptability. Recently fat taste has been introduced as a sixth basic taste. Fatty acids have been considered as the stimulus for this taste. So, linoleic acid as the stimulus for fat perception was added to the formulation to develop a product that tastes almost like full-fat versions but contains less fat. The advantages of aerated foods over conventional products are clear. Nonetheless, the determination of quality and sensory parameters during storage, marketing, and consuming is necessary. For this purpose, produced aerated sauces, along with commercial full- and reduced-fat sauces, were compared by measuring the acidity, pH, oxidative stability, and sensory properties.
 
Materials and Methods: Required amounts of mono- and diglyceride (MDG) and oil were mixed. Then nonaqueous foams were generated by whipping the MDG-oil mixtures. In the optimization study, the effect of MDG concentrations (2, 6, and 10 wt. %), whipping speed (1100, 3250, and 5400 rpm) and time (5, 15, and 25 min) on foam properties (overrun and drainage) was analyzed using RSM. The foam obtained from the optimum process condition was used to produce an aerated reduced-fat sauce. Sauce preparation was performed according to a usual recipe with the difference that the fat content was replaced by nonaqueous foam. Furthermore, 3.00 mM of linoleic acid as a fat taste stimulus was added to the formulation. First, an aqueous phase containing ingredients was prepared. Then nonaqueous foam was progressively incorporated in the aqueous phase. For the purposes of comparison, aerated sauces (0 and 3.00 mM stimulus), along with commercial sauces (zero, low, and full-fat), were analyzed by measuring the pH, acidity, oxidative stability, and sensory properties.
 
Results and Discussion: According to the results of the optimization study, the desired foam (overrun ≥ 60 %) achieved by oil containing 10 wt. % MDG at 3400 rpm for 10 min. Overrun increased progressively with MDG concentration but decreased slightly above 10 wt. % due to the difficulty of dispersing air bubbles in such a viscous gel. Considering the effect of whipping speed, and time, it was observed that mixtures reached their maximum volumes within 25 min. With a further increase in the whipping rate, the time required to achieve the maximum amount of foam was decreased. However, at high whipping speed (5400 rpm), foam volume decreased rapidly with time, and almost a lot of foam collapsed. The lowest and highest pH was related to zero and full-fat commercial sauces, respectively. There was no difference (p>0.05) between the pH of the control and the linoleic acid containing aerated, as well as low-fat sauces. Over time, as the pH decreases, the acidity of the aerated sauces increased and making the products with appropriate microbial stability. Due to the significant reduction of fat amount, oxidation of the aerated sauces was much slower than the full-fat one (p<0.05). Appearance, taste, and texture characteristics of aerated sauces provided a sensory profile similar to the full-fat sauce. The aerated sauce containing linoleic acid had higher sensory scores, indicating its general acceptance.
 
Conclusions: In this study, nonaqueous foam as a new approach for fat replacement in emulsion-based foods such as sauces was practically applied. The optimum aeration process conditions were determined by the help of experimental design. Two types of aerated sauces were prepared based on the linoleic acid concentration, and their physicochemical and sensory characteristics were compared with commercial sauces. The acidity and pH of the sauces were in the standard range, and also their oxidative stability was acceptable during storage time. Generally, the aerated sauce containing linoleic acid had relatively similar sensory profiles to the full-fat sauce. Therefore, it seems that nonaqueous foam could be used successfully to develop reduced-fat alternative foods, which could also be meet the consumers' and marketing requirements.
Materials and Methods:
Required amounts of mono- and diglyceride (MDG) and oil were mixed. Then nonaqueous foams were obtained by whipping the MDG-oil mixtures. In the optimization study, the effect of MDG concentration (2, 6, and 10 wt. %), whipping speed (1100, 3250, and 5400 rpm) and time (5, 15, and 25 min) on foam properties (overrun and drainage) were analyzed using RSM. The foam obtained from the optimum process condition was used to produce an aerated reduced-fat sauce. Sauce preparation was performed according to a usual recipe with the difference that the fat content was replaced by nonaqueous foam. Furthermore, 3.00 mM of linoleic acid as a fat taste stimulus was added to the formulation. First, an aqueous phase containing ingredients was prepared. Then nonaqueous foam was progressively incorporated in the aqueous phase. For purposes of comparison, aerated sauces (0 and 3.00 mM stimulus), along with commercial sauces (zero and full-fat), were analyzed by measuring the pH, acidity, oxidative stability, and sensory properties.
Results and Discussion:
According to the results of the optimization study, the desired foam (overrun ≥ 60 %) achieved by oil containing 10 wt. % MDG at 3200 rpm for 10 min. Overrun increased progressively with MDG concentration but decreased slightly above 10 wt. % due to the difficulty of dispersing air bubbles in such a viscous gel. Considering the effect of whipping speed, and time, it was observed that mixtures reached their maximum volumes within 25 min. With a further increase in the whipping rate, the time required to achieve the maximum amount of foam was decreased. However, at high whipping speed (5400 rpm), foam volume decreased rapidly with time, and almost a lot of foam collapsed. The lowest and highest pH was related to zero and full-fat commercial sauces, respectively. There was no difference between the pH of the control and the linoleic acid containing aerated sauces. Over time, as the pH decreases, the acidity of the aerated sauces increased and making them products with appropriate microbial stability. Due to the significant reduction of fat amount, oxidation of the aerated sauces was much slower than the commercial ones. Appearance, taste, and texture characteristics of aerated sauces provided a sensory profile similar to the full-fat sauce. The aerated sauce containing linoleic acid had higher sensory scores, indicating its general acceptance.
Conclusions: In this study, nonaqueous foam as a new approach for fat replacement in emulsion-based foods such as sauces was practically applied. The optimum aeration process conditions were determined by the help of experimental design. Two types of aerated sauces were prepared based on the linoleic acid concentration, and their physicochemical and sensory characteristics were compared with commercial sauces. The acidity and pH of the sauces were in the standard range, and also their oxidative stability was acceptable during storage time. Generally, the aerated sauce containing linoleic acid had relatively similar sensory profiles to the full-fat sauce. Therefore, it seems that nonaqueous foam could be used successfully to create reduced-fat alternative foods, which could also be meet consumers' and marketing requirements.

کلیدواژه‌ها [English]

• Sauce
• Emulsion
• Nonaqueous foam
• Optimization
• Linoleic acid

مراجع

1. Aganovic, K., Bindrich, U., & Heinz, V. (2018). Ultra-high pressure homogenisation process for production of reduced fat mayonnaise with similar rheological characteristics as its full fat counterpart. Innovative food science & emerging technologies, 45, 208-214. https://doi.org/10.1016/j.ifset.2017.10.013
2. Alu'datt, M. H., Rababah, T., Gammoh, S., Ereifej, K., Al-Mahasneh, M., Kubow, S., & Tawalbeh, D. (2016). Emulsified protein filaments: types, preparation, nutritional, functional, and biological properties of mayonnaise. In Emulsions (pp. 557-572). Academic Press. https://doi.org/10.1016/B978-0-12-804306-6.00016-7
3. AOCS Official Method Cd 8b-90, 2017. Sampling and analysis of commercial fats and oils.
4. Arancibia, C., Costell, E., & Bayarri, S. (2011). Fat replacers in low-fat carboxymethyl cellulose dairy beverages: Color, rheology, and consumer perception. Journal of dairy science, 94(5), 2245-2258. https://doi.org/10.3168/jds.2010-3989
5. Bazmi, A., Duquenoy, A., & Relkin, P. (2007). Aeration of low fat dairy emulsions: Effects of saturated–unsaturated triglycerides. International dairy journal, 17(9), 1021-1027. https://doi.org/10.1016/j.idairyj.2006.12.011
6. Bimal, C., & Guonong, Z. (2006). Olestra: A solution to food fat?. Food Reviews International, 22(3), 245-258. https://doi.org/10.1080/87559120600694705
7. Binks, B. P., Garvey, E. J., & Vieira, J. (2016). Whipped oil stabilised by surfactant crystals. Chemical science, 7(4), 2621-2632. DOI: 1039/C6SC00046K
8. Binks, B. P., & Marinopoulos, I. (2017). Ultra-stable self-foaming oils. Food Research International, 95, 28-37. https://doi.org/10.1016/j.foodres.2017.02.020
9. Binks, B. P., Rocher, A., & Kirkland, M. (2011). Oil foams stabilised solely by particles. Soft Matter, 7(5), 1800-1808. https://doi.org/10.1039/C0SM01129K
10. Brun, M., Delample, M., Harte, E., Lecomte, S., & Leal-Calderon, F. (2015). Stabilization of air bubbles in oil by surfactant crystals: A route to produce air-in-oil foams and air-in-oil-in-water emulsions. Food Research International, 67, 366-375. https://doi.org/10.1016/j.foodres.2014.11.044
11. Campbell, G. M., & Mougeot, E. (1999). Creation and characterisation of aerated food products. Trends in food science & technology, 10(9), 283-296. https://doi.org/10.1016/S0924-2244(00)00008-X
12. Chale-Rush, A., Burgess, J. R., & Mattes, R. D. (2007). Evidence for human orosensory (taste?) sensitivity to free fatty acids. Chemical senses, 32(5), 423-431. https://doi.org/10.1093/chemse/bjm007
13. Chen, X. W., Yang, D. X., Zou, Y., & Yang, X. Q. (2017). Stabilization and functionalization of aqueous foams by Quillaja saponin-coated nanodroplets. Food Research International, 99, 679-687. https://doi.org/10.1016/j.foodres.2017.06.045v
14. Chung, C., Degner, B., Decker, E. A., & McClements, D. J. (2013). Oil-filled hydrogel particles for reduced-fat food applications: Fabrication, characterization, and properties. Innovative Food Science & Emerging Technologies, 20, 324-334. https://doi.org/10.1016/j.ifset.2013.08.006
15. Chung, C., Smith, G., Degner, B., & McClements, D. J. (2016). Reduced fat food emulsions: physicochemical, sensory, and biological aspects. Critical reviews in food science and nutrition, 56(4), 650-685. https://doi.org/10.1080/10408398.2013.792236
16. Ciron, C. I. E., Gee, V. L., Kelly, A. L., & Auty, M. A. (2011). Effect of microfluidization of heat-treated milk on rheology and sensory properties of reduced fat yoghurt. Food Hydrocolloids, 25(6), 1470-1476. https://doi.org/10.1016/j.foodhyd.2011.02.012
17. Dickinson, E. (2012). Emulsion gels: The structuring of soft solids with protein-stabilized oil droplets. Food hydrocolloids, 28(1), 224-241. https://doi.org/10.1016/j.foodhyd.2011.12.017
18. Passos, R. B. D., Bazzo, G. C., Almeida, A. D. R., Noronha, C. M., & Barreto, P. L. M. (2019). Evaluation of oxidative stability of mayonnaise containing poly ε-caprolactone nanoparticles loaded with thyme essential oil. J. Pharm. Sci.(Online), 18177-18177.
19. Drenckhan, W., & Saint-Jalmes, A. (2015). The science of foaming. Advances in Colloid and Interface Science, 222, 228-259. https://doi.org/10.1016/j.cis.2015.04.001
20. El-Yassimi, A., Hichami, A., Besnard, P., & Khan, N. A. (2008). Linoleic acid induces calcium signaling, Src kinase phosphorylation, and neurotransmitter release in mouse CD36-positive gustatory cells. Journal of biological chemistry, 283(19), 12949-12959. DOI:https://doi.org/10.1074/jbc.M707478200
21. Emadzadeh, B., Razavi, S. M. A., Rezvani, E., & Schleining, G. (2015). Steady shear rheological behavior and thixotropy of low-calorie pistachio butter. International Journal of Food Properties, 18(1), 137-148. https://doi.org/10.1080/10942912.2013.822882
22. Fameau, A. L., Lam, S., Arnould, A., Gaillard, C., Velev, O. D., & Saint-Jalmes, A. (2015). Smart nonaqueous foams from lipid-based oleogel. Langmuir, 31(50), 13501-13510. https://doi.org/10.1021/acs.langmuir.5b03660
23. Fameau, A. L., & Saint-Jalmes, A. (2017). Non-aqueous foams: Current understanding on the formation and stability mechanisms. Advances in colloid and interface science, 247, 454-464. https://doi.org/10.1016/j.cis.2017.02.007
24. Harvey, J. L. (1959). Title 21—Food and drugs chapter I—Food and drug administration, department of health, education, and welfare subchapter B—Food and food products part 121—Food additives definitions and procedural and interpretative regulations. Food, Drug, Cosmetic Law Journal, 14(4), 269-290.
25. Featherstone, S., 2014. A Complete Course in Canning and Related Processes: Fourteenth Edition, A Complete Course in Canning and Related Processes: Fourteenth Edition. Elsevier Inc. https://doi.org/10.1016/C2013-0-16339-8
26. Garrec, D. A., Frasch-Melnik, S., Henry, J. V., Spyropoulos, F., & Norton, I. T. (2012). Designing colloidal structures for micro and macro nutrient content and release in foods. Faraday Discussions, 158(1), 37-49. https://doi.org/10.1039/C2FD20024D
27. Garrec, D. A., & Norton, I. T. (2012). Understanding fluid gel formation and properties. Journal of Food Engineering, 112(3), 175-182. https://doi.org/10.1016/j.jfoodeng.2012.04.001
28. González-Tomás, L., Bayarri, S., Taylor, A. J., & Costell, E. (2008). Rheology, flavour release and perception of low-fat dairy desserts. International Dairy Journal, 18(8), 858-866. https://doi.org/10.1016/j.idairyj.2007.09.010
29. Guardeno, L. M., Hernando, I., Llorca, E., Hernández‐Carrión, M., & Quiles, A. (2012). Microstructural, physical, and sensory impact of starch, inulin, and soy protein in low‐fat gluten and lactose free white sauces. Journal of food science, 77(8), C859-C865. https://doi.org/10.1111/j.1750-3841.2012.02798.x
30. Gunes, D. Z., Murith, M., Godefroid, J., Pelloux, C., Deyber, H., Schafer, O., & Breton, O. (2017). Oleofoams: Properties of Crystal-Coated Bubbles from Whipped Oleogels Evidence for Pickering Stabilization. Langmuir, 33(6), 1563-1575. https://doi.org/10.1021/acs.langmuir.6b04141
31. Hosseinvand, A., & Sohrabvandi, S. (2016). Physicochemical, textural and sensory evaluation of reduced-fat mustard sauce formulation prepared with Inulin, Pectin and β-glucan. Croatian journal of food science and technology, 8(2), 46-52. https://doi.org/10.17508/CJFST.2016.8.2.01
32. Javidi, F., Razavi, S. M., & Amini, A. M. (2019). Cornstarch nanocrystals as a potential fat replacer in reduced fat O/W emulsions: A rheological and physical study. Food Hydrocolloids, 90, 172-181. https://doi.org/10.1016/j.foodhyd.2018.12.003
33. Karas, R., Skvarča, M., & Žlender, B. (2002). Sensory quality of standard and light mayonnaise during storage. Food Technology and Biotechnology, 40(2), 119-127.
34. Labbafi, M., Thakur, R. K., Vial, C., & Djelveh, G. (2007). Development of an on-line optical method for assessment of the bubble size and morphology in aerated food products. Food Chemistry, 102(2), 454-465. https://doi.org/10.1016/j.foodchem.2006.06.011
35. Laca, A., Sáenz, M. C., Paredes, B., & Díaz, M. (2010). Rheological properties, stability and sensory evaluation of low-cholesterol mayonnaises prepared using egg yolk granules as emulsifying agent. Journal of Food Engineering, 97(2), 243-252. https://doi.org/10.1016/j.jfoodeng.2009.10.017
36. Lee, D. H., Jeong, I. J., & Kim, K. J. (2018). A desirability function method for optimizing mean and variability of multiple responses using a posterior preference articulation approach. Quality and Reliability Engineering International, 34(3), 360-376. https://doi.org/10.1002/qre.2258
37. Liu, H., Xu, X. M., & Guo, S. D. (2007). Rheological, texture and sensory properties of low-fat mayonnaise with different fat mimetics. LWT-Food Science and Technology, 40(6), 946-954. https://doi.org/10.1016/j.lwt.2006.11.007
38. McClements, D. J. (2015). Reduced-fat foods: the complex science of developing diet-based strategies for tackling overweight and obesity. Advances in Nutrition, 6(3), 338S-352S. https://doi.org/10.3945/an.114.006999
39. Mishima, S., Suzuki, A., Sato, K., & Ueno, S. (2016). Formation and microstructures of whipped oils composed of vegetable oils and high-melting fat crystals. Journal of the American Oil Chemists' Society, 93(11), 1453-1466. https://doi.org/10.1007/s11746-016-2888-4
40. Odriozola-Serrano, I., Soliva-Fortuny, R., & Martín-Belloso, O. (2009). Impact of high-intensity pulsed electric fields variables on vitamin C, anthocyanins and antioxidant capacity of strawberry juice. LWT-Food Science and Technology, 42(1), 93-100. https://doi.org/10.1016/j.lwt.2008.05.008
41. Oppermann, A. K. L., Piqueras-Fiszman, B., De Graaf, C., Scholten, E., & Stieger, M. (2016). Descriptive sensory profiling of double emulsions with gelled and non-gelled inner water phase. Food Research International, 85, 215-223. https://doi.org/10.1016/j.foodres.2016.04.030
42. Saremnejad, F., Mohebbi, M., & Koocheki, A. (2020). Practical application of nonaqueous foam in the preparation of a novel aerated reduced-fat sauce. Food and Bioproducts Processing, 119, 216-225. https://doi.org/10.1016/j.fbp.2019.11.004
43. Costa, A. R., Rosado, E. L., & Soares-Mota, M. (2012). Influence of the dietary intake of medium chain triglycerides on body composition, energy expenditure and satiety; a systematic review. Nutricion hospitalaria, 27(1), 103-108.
44. Riener, J., Noci, F., Cronin, D. A., Morgan, D. J., & Lyng, J. G. (2009). The effect of thermosonication of milk on selected physicochemical and microstructural properties of yoghurt gels during fermentation. Food Chemistry, 114(3), 905-911. https://doi.org/10.1016/j.foodchem.2008.10.037
45. Running, C. A., Craig, B. A., & Mattes, R. D. (2015). Oleogustus: the unique taste of fat. Chemical senses, 40(7), 507-516. https://doi.org/10.1093/chemse/bjv036
46. Running, C. A., & Mattes, R. D. (2016). A review of the evidence supporting the taste of non-esterified fatty acids in humans. Journal of the American Oil Chemists' Society, 93(10), 1325-1336. https://doi.org/10.1007/s11746-016-2885-7
47. Shamsaei, S., Razavi, S. M. A., Emadzadeh, B., & Atayesalehi, E. (2017). The effect of basil seed gum and xanthan on the physical and rheological characteristics of low fat mayonnaise. Iranian Food Science and Technology Research Journal, 13(1), 65-78. http://dx.doi.org/10.22067/ifstrj.v1395i0.37356
48. Sheng, L., Wang, Y., Chen, J., Zou, J., Wang, Q., & Ma, M. (2018). Influence of high-intensity ultrasound on foaming and structural properties of egg white. Food Research International, 108, 604-610. https://doi.org/10.1016/j.foodres.2018.04.007
49. Shrestha, L. K., Aramaki, K., Kato, H., Takase, Y., & Kunieda, H. (2006). Foaming properties of monoglycerol fatty acid esters in nonpolar oil systems. Langmuir, 22(20), 8337-8345. https://doi.org/10.1021/la061204h
50. Shrestha, L.K., Shrestha, R.G., Sharma, S.C., Aramaki, K., (2008). Stabilization of nonaqueous foam with lamellar liquid crystal particles in diglycerol monolaurate/olive oil system. J. Colloid Interface Sci. 328, 172–179. https://doi.org/10.1016/j.jcis.2008.08.051
51. Shrestha, R. G., Shrestha, L. K., Solans, C., Gonzalez, C., & Aramaki, K. (2010). Nonaqueous foam with outstanding stability in diglycerol monomyristate/olive oil system. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 353(2-3), 157-165. https://doi.org/10.1016/j.colsurfa.2009.11.007
52. Sørensen, L. B., Cueto, H. T., Andersen, M. T., Bitz, C., Holst, J. J., Rehfeld, J. F., & Astrup, A. (2008). The effect of salatrim, a low-calorie modified triacylglycerol, on appetite and energy intake. The American journal of clinical nutrition, 87(5), 1163-1169. https://doi.org/10.1093/ajcn/87.5.1163
53. Spence, C. (2015). Multisensory flavor perception. Cell, 161(1), 24-35. https://doi.org/10.1016/j.cell.2015.03.007
54. Tchuenbou-Magaia, F. L., Norton, I. T., & Cox, P. W. (2009). Hydrophobins stabilised air-filled emulsions for the food industry. Food Hydrocolloids, 23(7), 1877-1885. https://doi.org/10.1016/j.foodhyd.2009.03.005
55. Thaiudom, S., & Khantarat, K. (2011). Stability and rheological properties of fat-reduced mayonnaises by using sodium octenyl succinate starch as fat replacer. Procedia Food Science, 1, 315-321. https://doi.org/10.1016/j.profoo.2011.09.049
56. Velázquez, A. L., Vidal, L., Varela, P., & Ares, G. (2020). Cross-modal interactions as a strategy for sugar reduction in products targeted at children: Case study with vanilla milk desserts. Food Research International, 130, 108920. https://doi.org/10.1016/j.foodres.2019.108920.
57. Sorensen, L. B., Cueto, H. T., Andersen, M. T., Bitz, C., Holst, J. J., Rehfeld, J. F., & Astrup, A. (2008). The effect of salatrim, a low-calorie modified triacylglycerol, on appetite and energy intake. The American journal of clinical nutrition, 87(5), 1163-1169. https://doi.org/10.1093/ajcn/87.5.1163
58. Shamsaee, S., Razavi, S.M.A., Emadzadeh, B., Salehi, E.A., (2017). The effect of basil seed gumand xanthan on the physical and rheological characteristics of low fat mayonnaise. Iran. Food Sci. Technol. Res. J. 13, 65–78. https://doi.org/https://doi.org/10.22067/ifstrj.v1395i0.37356
59. Shrestha, R.G., Shrestha, L.K., Solans, C., Gonzalez, C., Aramaki, K., (2010). Nonaqueous foamwith outstanding stability in diglycerol monomyristate/olive oil system. ColloidsSurfaces A Physicochem. Eng. Asp. 353, 157–165. https://doi.org/10.1016/j.colsurfa.2009.11.007
60. Friberg, S.E., (2010). Foams from non-aqueous systems. Curr. Opin. Colloid Interface Sci. 15, 359–364. https://doi.org/10.1016/j.cocis.2010.05.011
61. FDA, (2018). Title 21--Food and drugs Chapter i--Food and drug administration department of health and human services Subchapter b--Food for human consumption Part 169 Food dressings and flavorings [WWW Document]. URL https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/CFRSearch.cfm?CFRPart=169
62. Guardeño, L.M., Hernando, I., Llorca, E., Hernández-Carrión, M., Quiles, A., (2012). Microstructural, Physical, and Sensory Impact of Starch, Inulin, and Soy Protein in Low-Fat Gluten and Lactose Free White Sauces. J. Food Sci. 77, 1–7. https://doi.org/10.1111/j.1750-3841.2012.02798.x
63. Syarifuddin, A., Septier, C., Salles, C., Thomas-Danguin, T., 2016. Reducing salt and fat while maintaining taste: An approach on a model food system. Food Qual. Prefer. 48, 59–69. https://doi.org/10.1016/j.foodqual.2015.08.009
64.