Food Biotechnology
Soheyl Reyhani Poul; Sakineh Yeganeh; Zeynab Raftani Amiri
Abstract
Introduction Since heat treatments and special standards are not used in the production of traditional (homemade) tomato paste, fungal and bacterial spoilage in the product occurs extensively during storage in the refrigerator (4°C). Astaxanthin extracted from aquatics has antimicrobial activity ...
Read More
Introduction Since heat treatments and special standards are not used in the production of traditional (homemade) tomato paste, fungal and bacterial spoilage in the product occurs extensively during storage in the refrigerator (4°C). Astaxanthin extracted from aquatics has antimicrobial activity and color similar to tomato and can probably be effective in preventing spoilage of tomato paste. In addition, astaxanthin has other properties in the field of preventing and controlling diseases and maintaining human health, which justifies its use in food formulations as an enrichment. Since heat, enzyme, acid, etc. treatments are practiced during the production of tomato paste, these factors may change the structure and thus the function of astaxanthin. For this reason, astaxanthin nanoencapsulation is necessary for its use in tomato paste formulation. Materials and Methods In this research, first, astaxanthin was extracted from Haematococcus pluvialis microalgae using the acid-acetone combined method. Then, this pigment was nanoencapsulated using maltodextrin-sodium caseinate coating and the resulting nanocapsules were used together with the pure form of astaxanthin in the formulation of tomato paste. The research treatments were control, tomato pastes containing 3 and 6% astaxanthin (A and B, respectively) and also 3, 6 and 9% nanocapsules carrying the pigment (C, D and E, respectively). These treatments were kept at refrigerator for 28 days and were evaluated (on days 0, 7, 14, 21 and 28) in terms of the total number of fungi, Howard's number (HMC), pH, fungal flora, total bacteria count, amount of lactic acid bacteria and sensory properties. This research was conducted in a completely randomized design. Data were analyzed by One-way Anova and the difference between the means was evaluated by Duncan's test at 95% confidence level. Results and Discussion The results showed that the fungi proliferation, total count and lactic acid bacteria were slower than the control during the storage period in the treatments containing astaxanthin and its carrying nanocapsules, and the minimum number of the mentioned microorganisms and Howard's number were related to treatments D and E (p>0.05). Treatments C, B and A were ranked next in this respect (p<0.05). The number of fungi in two treatments D and E from day 0 to 28 varied from 128 to 332 cfu/gr. Also, the Howard number of these treatments was recorded from 18 to 34% in the mentioned time period. However, these two indices in the control ranged from 121 to 792 cfu/gr and 18 to 91%, respectively, during the storage period. The count of total bacteria and the amount of lactic acid bacteria in the control on day 28 were equal to 8.9 cfu/gr and 311 mg/kg, respectively, but these two values were recorded in the E and D treatments on the same day, about 4.8 cfu/gr and 110 mg/kg, respectively. Counting the total number of fungi, bacterias and also Howard's number in control and other treatments showed that the effect of nanocapsules carrying astaxanthin on microbial growth and proliferation is significantly greater than pure astaxanthin (p<0.05). The pH of the treatments varied from 3.9 to 5.8 during the storage period and the most standardized pH (3.9-4.4) was recorded in C, D and E (p>0.05) treatments (p<0.05). The pH of two treatments A and B (p>0.05) was higher than the three mentioned treatments and lower than the control (p<0.05). This finding showed that nanocapsules carrying astaxanthin have a greater effect on controlling the pH of tomato paste than pure astaxanthin during storage at refrigerator (p<0.05). The identification of the fungal flora of the treatments on the 28th day confirmed that two genus of Penicillium and Aspergillus form the main flora of the product. The results of the sensory evaluation of the treatments on day 0 showed that adding astaxanthin and its carrier nanocapsules does not change the color, aroma, taste and texture indicators (subsequently the general acceptance) of tomato paste (p>0.05). On the 28th day, the mentioned sensory indices only in the two treatments D and E were not significantly different from the 0 day, but they changed negatively in the other treatments (p<0.05). Conclusion According to the findings of the present research, astaxanthin extracted from Haematococcus pluvialis microalgae has the ability to inhibit fungal and bacterial spoilage and stabilize the sensory properties of tomato paste stored at refrigerator. This properties were improved by adding nanoencapsulated pigment using maltodextrin-sodium caseinate combined coating. Since there were no significant differences between the two treatments containing 6% and 9% of nanocapsules carrying astaxanthin (D and E) in terms of quality indices and microbial spoilage, therefore, the treatment containing 6% nanocapsules is introduced as the optimal treatment.
Food Technology
Delaram Hami; Mohammad Goli
Abstract
Introduction: Ice cream contains a mixture of milk components, sweeteners, stabilizers, emulsifiers, and flavorings. The quality of the finished product depends not only on the processing conditions or the freezing efficiency, but also on the constituents, the amount of entrapped air, and the number ...
Read More
Introduction: Ice cream contains a mixture of milk components, sweeteners, stabilizers, emulsifiers, and flavorings. The quality of the finished product depends not only on the processing conditions or the freezing efficiency, but also on the constituents, the amount of entrapped air, and the number of ice crystals. The physical structure of ice cream has a significant effect on the melting properties (melting rate) and texture (hardness) of ice cream (Mouse & Hartel, 2004). The improvement and expansion of the ice cream structure are attributed to the macromolecules present in the ice cream mixture; milk fat, protein, and carbohydrates (Adapa et al., 2000). Quinoa as a high biologically valuable protein can be used in various food products to enrich and positively affect the physical and sensory properties of the product (James, 2009). The purpose of the present study was to replace skim milk powder with quinoa flour (0 to 100%), hydrogenated vegetable oil (4.5 to 8.5%) and Panisol gum (0.25 to 0.65%) to obtain the optimal formulas of Vanilla ice cream using the response surface methodology. Materials and Methods: After adjusting the ratio of the ingredients in the various ice cream formulations, the amount of raw material of each formula was weighed. The milk was then heated to about 45 ° C, and then the remaining ingredients were slowly added and thoroughly mixed. The mixture was then pasteurized at 85 °C for 15 minutes. After the pasteurization operation, the mixture was immediately kept in a water-ice bath and cold down for 4 hours in a 4 °C refrigerator. After the ripening step, the mixture went through the freezing phase in a homemade ice cream maker. The ice cream samples were packed in plastic containers and stored at -18 °C for the period of hardening. To optimize the process conditions, the independent variables A (quinoa flour replacement from 0 to 100%), B (hydrogenated vegetable oil from 4.5 to 8.5%) and C (Panisol gum from 0.25 to 0.65%) were selected at five levels. To obtain optimal points, 34 experiments were recommended by design expert software. The volumetric overrun (%) and the melting rate (g/min.) were measured according to Hashemi et al., (2015) method. Ice cream textural properties were tested after 3 days storage at -18 °C using a Brookfield texture analyzer. It was equipped with a cylindrical probe with a diameter of 6 mm and a height of 15 mm. The probe was applied to the test samples twice at a speed of 1 mm / s and up to 50% of the probe height and the results were recorded by device software. Ice cream textural data used in this study included hardness (g) and adhesiveness (g. sec) (Hashemi et al., 2015). Results and Discussions: Reducing overrun of ice cream samples by increasing the replacement levels of quinoa flour can be attributed to an increase in the viscosity. As viscosity increases, due to the reduced mixing ability of the ice cream mixture, the ability of air to enter the mixture of ice cream containing quinoa flour has been reduced during freezing (Gelroth et al., 2001). The reason for the decrease in the melting rate of ice cream with increasing percentage of quinoa flour replacement can be attributed to the existence of polysaccharide compounds with high water holding capacity, which led to increase the product water intake intensity and viscosity and subsequently decreasethe overrun. One of the factors affecting the melting properties is the increase in volume. In addition, the role of quinoa flour in enhancing the melting resistance of ice cream can be attributed to the type of protein content, the emulsifier potential and the surface active properties of its proteins and lipids. The presence of high amounts of protein in quinoa flour has a significant effect on the stability of air molecules. Since quinoa flour contains high amounts of protein, this fraction of flour quinoa protein, increases the hardness of ice cream through creating hydrogen bonds between the amide-hydroxyl and hydroxyl-carbonyl groups with other polar groups of other ice cream components such as panisol gum. In addition, hydrogen bonds are likely to be formed by electrostatic interactions between the quinoa protein groups of the polar with the polar part of the gum panisol, which may also be the reason for the increased hardness of the ice cream in the presence of the quinoa flour. With polar groups, quinoa flour traps the water in its structure and ultimately increases the consistency and adhesiveness of the ice cream. It is also possible that the protein portion of quinoa flour binds to the water molecules present in the sample through hydrogen bonding and ion-dipole and dipole-dipole interactions, thereby reducing water activity, increasing sample adhesiveness (Fatemi, 2008). The optimal formulas were predicted for replacement of skim milk powder with quinoa flour at 25 and 53%, hydrogenated vegetable oil 8.5 and 8.2% and panisol gum 0.39 and 0.48%, respectively.
Food Technology
Ali Kashani; Maryam Hasani; Leila Nateghi; Mohammad javad Asadolahzadeh; Parvin Kashani
Abstract
Introduction: Nowaday, the demand for low calorie food based and keeping primary features including texture and taste is increasing. Jelly is one of low calorie products produced from fruits and other components, and its consumption is increasing for human health. Jelly is semi-solid and transparent ...
Read More
Introduction: Nowaday, the demand for low calorie food based and keeping primary features including texture and taste is increasing. Jelly is one of low calorie products produced from fruits and other components, and its consumption is increasing for human health. Jelly is semi-solid and transparent product that prepared with the use of sugar or juice and pectin or gelatin and flavor and color may also be added. Potato peels contain valuable substances such as pectin. Using potato peels to produce pectin with appropriate properties can solve the environmental issue resulting from these wastes in addition to make value added product. Pectin is a complex polysaccharide that is found in the wall of early plant texture and in the intercellular layer. Pectin contains a group of rich polysaccharides of galacturonic acid units with lower amounts of different sugars (Baiano, 2014). Two commercial forms of pectin are available: high-methoxyl and low-methoxyl pectin (high ester and low ester pectin). High-ester pectin forms a gel in a solutions containing high soluble solids and acidic systems, whereas low-ester pectins form more gel at wider pH and range of solids content but they do require divalent cations to form the gel (Kratchanova et al., 2012). In the food industry, pectin is used as a jelly-making agent, especially in the production of jellies and jams. Pectin is also used in fillers, medicine, pastries, bakery products and also as a stabilizer in juices and beverages, as well as in dietary fiber (Sharma, 2006). Pectin also has therapeutic benefits such as lowering blood cholesterol levels, removing heavy metal ions from the body, stabilizing blood pressure and facilitating intestinal activity (Ptichkina et al., 2008). Temperature, pH, and acid extraction time are the most important factors affecting the extraction yield and quality of produced pectin (Yapo et al., 2007). Currently, almost all commercial pectins are produced from citrus or apple peels, both of which are juices by-products (Thirugnanasambandham et al., 2014). Therefore, the main objective of this study was to optimize the conditions of extraction of pectin from potato peel by response surface methodology and to compare the physicochemical properties of Jelly produced from potato peel under optimum conditions with Jelly produced from apple and citrus Material and methods: Potato of Granola variety was purchased from the local market in Ardebil. The chemicals used for the tests include: citric acid, sodium hydroxide, phenolphthalein, and Calcium chloride were purchased from Merck Company (Germany). The method of Hoseeni et al (2017) was used for jelly production with slight modification as follows. In the First step,0.5 and 1% pectin extracted from potato peelings, 30 % Sugar, 0.014 % Cherry edible color and 0.75 % Cherry essential oil were mixed then 100 CC Boiling water was added to the mixture and mixed again. After the sugar was completely dissolved, 15, 30, and 45 mg of calcium chloride was added per gram of pectin. The pH of the samples was regulated by citric acid solution on 2.5 and 4. The heating of the samples was continued until the brix of the treated treatments was set to 42. The prepared samples were kept at room temperature for half an hour. The treatments were then refrigerated for 2 to 3 hours to complete the jelly closing process. For this purpose some jelly characteristics such as texture properties, physico-chemical (pH, acidity, brix, moisture and Drainage) and sensory properties of samples were investigated using five point hedonic scale. A one-way analysis of variance and Duncan test (P≤ 0.05) in three replications were used to establish the significance of differences in the experimental data. The results were analyzed using the Minitab version 16. Results & Discussion: Results showed that by increasing calcium chloride, pH and Pectin concentration had a significant effect on increasing the hardness of the gel and the strength needed to make the gel brittle (P≤0.05).The highest hardness of the gel in pectin emulsion extracted from potato peel was 30.0959 N and highest force required to break the gel was 27.3431 N in the most severe extraction conditions at Calcium chloride 35.2286 mg/g, Pectin concentration 1% and pH 4. Results of physico-chemical properties showed that there was no significant difference between pH, acidity, brix and moisture of jelly made from apple pectin and citrus and apple commercial pectin. The results of the syneresis showed that the syneresis by the jelly of potato pectin is not similar with jelly from apple pectin and citrus and apple commercial pectin significantly different. Also Results of sensory properties showed that it was no significant difference between jelly from apple pectin and citrus and apple commercial pectin. The results of this study showed that by optimizing the production conditions, potato pectin can be used in jelly formulation and jelly can be produced with desirable and comparable quality compared to the commercial pectins
Marzieh Salami; Massoumeh Mehraban Sangatash; Ahmad Ehtiati
Abstract
Introduction: Yogurt is one of the most popular dairy products, which has numerous health effects on human body. Dietary fiber consumption is highly recommended. Fibers are highly hydrophilic and absorb water into the digestive track, increase the volume of food and thereby facilitating excretion. These ...
Read More
Introduction: Yogurt is one of the most popular dairy products, which has numerous health effects on human body. Dietary fiber consumption is highly recommended. Fibers are highly hydrophilic and absorb water into the digestive track, increase the volume of food and thereby facilitating excretion. These are some health benefits of these compounds. Consumption of fiber-containing yogurt can be helpful for people who suffer from cardiovascular diseases, hypertension, diabetes and obesity. Zucchini, as a vegetable, is a source of fibers and due to its health-promoting effects, can be used in dairy products. The aim of this study is to evaluate the effects of different levels of dried zucchini on stirred yogurt during storage. Materials and Methods: The raw materials for the production of the functional yogurt were zucchini, milk, skim milk powder, whey powder, hydrocolloids stabilizer compound and starter culture. Fresh zucchini was hot-air dried at 70 °C for 7 hours. Two forms of the dried zucchini (powder and granule) were added to fresh yogurt at levels of 0.7, 1.4, and 2%. The samples were then tested on days 1, 5, 10 and 15 for acidity (titration method), pH, texture stiffness (back extrusion), syneresis, color (using image processing) and sensory properties, including color, taste, aroma, consistency, mouthfeel and overall acceptance. The experiments were triplicated and analysis of variance was performed using Minitab software at 95% confidence interval. For the significant variables, the means were compared using LSD method. Graphs were drawn using MS-Excel. Results and Discussion: The effects of zucchini form and level of addition, storage time and interaction of these variables were significant (P<0.05) on the titratable acidity, pH and firmness. Over time, pH decreased and acidity increased, which was related to the starter activity and acid production. Due to the use of stabilizer and whey protein, all samples showed no syneresis. The firmness of the samples containing zucchini powder was higher than that of the granule- (P<0.05). This might be related to the homogeneous structure of zucchini fiber, which increased water absorption regarding its lower particle size. Firmness increased from day one to day five, due to the high water absorption of hydrocolloids that bind to free water present in the yogurt structure. The presence of milk proteins and whey protein concentrate in the yogurt formula enhanced crosslinking in the particle gel network, which resulted in a stronger gel structure. During longer storage, firmness decreased from day 5 to day 10, probably was due to the increased pH, which affects the proteins and polysaccharides interaction. The effects of the form and level of zucchini and the interaction between these variables were significant (p <0.05) on the changes in L*, a*, and b*. The L* and a* values which were higher in the samples containing zucchini granules than in the zucchini powder, most probably due to the smaller particle sizes of the powder compared with the granules, causing the number of the powder particles per unit volume to be larger and the powder-containing samples to become darker. In terms of the level of addition, L* increased as the zucchini level rose to 1.4% and then declined to 2%. The sensory properties of all samples were significantly affected by the storage time (P<0.05). With increase in the storage time, all the sensory scores increased. The highest overall acceptance score belonged to the yogurt sample containing 1.4% granule on the 10th day of storage. Overall, zucchini is a good candidate for yogurt fortification. This incorporation results in a greenish yogurt with more health functionalities. The highest overall acceptance score was obtained for the yogurt containing 1.4% zucchini granule on the 10th day of storage (best consumption date) and the results showed acceptable firmness for this sample.
Ali Shahdadi Sardoo; Nasser Sedaghat; Masoud Taghizadeh; Elnaz Milani
Abstract
Introduction: In Iran, the main problem in greenhouse cucumber production and post-harvest shelf life is short due to the application of traditional packaging and storage methods. This research was carried out in order to investigate on the effects of packaging type and chitosan edible coating on the ...
Read More
Introduction: In Iran, the main problem in greenhouse cucumber production and post-harvest shelf life is short due to the application of traditional packaging and storage methods. This research was carried out in order to investigate on the effects of packaging type and chitosan edible coating on the physicochemical and sensory characteristics of Royal Greenhouse cucumber during storage conditions, in order to prevent of Royal greenhouse cucumber postharvest losses.
Materials and methods: Royal greenhouse cucumbers placed inside the three-layer plastic bags of PE/PA/PE and the effect of different chitosan coating (0, 0.5 & 1 %), concentration of oxygen (3,12 & 21%), storage temperatures (5, 15 & 25 ˚C) and storage time (3, 12 & 21 days) on cucumber quality and shelf life was studied. The quality of cucumber samples was evaluated by weight loss, firmness retention, surface color development (L*, a*, b*), shrinkage and sensory evaluation (taste and freshness).
Results and discussion: The obtained results showed that firmness and organoleptic properties decreased with increasing temperature and time storage, while weight loss and shrinkage was increased, that Leading to loss of cucumber samples quality during storage. Increasing of chitosan coating to 0.5% also showed a beneficial effect on physicochemical and sensory characteristics of the samples during the storage time compared to the control fruit, but by increasing it to 1%, decreased the quality of the final product. The results showed that using modified atmosphere packaging and storage at low temperatures can be in addition to the slow breathing fresh cucumbers from softening and prevent moisture loss the maintenance of cucumber. MAP packaging leads to keeping cucumber green and quality properties compared to the control samples. The optimum condition was obtained at chitosan coating 0.5 %, O2concentration 8.5 %, storage temperatures 9˚C and storage time of 14 days. At this optimum point maximum of firmness, L*, taste, freshness and minimum of shrinkage, weight loss and a* were found to be 10.4 (N), 48.9, 4.35, 4.5, 6.25 %, 2.75 % and -37.28 respectively.
Ainaz Khodanazary; Sara Golgolipour; Kamal Ghanemi
Abstract
Introduction: Grass carp (Ctenopharyngodonidella, family Cyprinidae) is one of the main fresh water fish species and highly demanded aquaculture species in Iran. Among the cultivated fish, grass carp, also called farmed white fish, has received great attention because of its similarity to Caspian white ...
Read More
Introduction: Grass carp (Ctenopharyngodonidella, family Cyprinidae) is one of the main fresh water fish species and highly demanded aquaculture species in Iran. Among the cultivated fish, grass carp, also called farmed white fish, has received great attention because of its similarity to Caspian white fish in Iran. The muscle of fish contains important levels of nutrients which are beneficial to health. Most research has been done and published on raw flesh. Cooking can lead to a loss of the nutritional value of foods. In this case the preservation of the maximum nutritive value can be ensured by using correct methods of cooking. The aim of this research was the influence of five cooking methods (poaching, boiling, microwave pan- frying and deep- frying) on changes of free fatty acids, thiobarbitoric acid, heavy metal (Ni, Cr, Co, Cd, Pb) and sensory properties of grass carp (Ctenopharyngodonidella)fillets was evaluated.Materials and method: Grass carpsamples were purchased from a local market in Khorramshahr city, Khuzestan province, Iran. The fish were kept alive and transported to thelaboratory. On arrival,tsamples were washed and eviscerated. The samples were filleted and cut into slices (100 g each). The fish samples were cooked using AOAC 976.16 procedure (method for cooking seafood). Five common cooking procedures were selected: poaching in stainless steel pot of boiling water for 30 min and 30 s, steaming in stainless steel steamer for 5 min and 30 s, microwaving in microwave for 40 s, pan-frying (without oil) in frying pan for 6 min at 180 ºC and deep-frying in olive oil in a deep fryer for 5 min at 180 ºC. After the cooking process, the samples were cooled to room temperature and the skin and backbone of the samples were removed. All fish in each lot were homogenized using a kitchen blender and analyzed to determine free fatty acid, thiobarbitoric acid, heavy metal and sensory properties. All sample homogenates were assayed in triplicate.Results and discussion: The results indicated that the cooking methods of pouching, microwave and deep-frying increased thiobarbitoric acid (TBA), while cooking methods of boiling and pan- frying did not change TBA. The free fatty acid (FFA) content of the fillets was significantly reduced by the different cooking methods. The Ni in the cooking methods of boiling, pan- frying and deep- frying was not detected. The Cr in the cooking method of deep-fried samples was significantly decreased. The Co concentrations were below limits of detection in all samples. The Cd was only detected in microwave samples. The Pb content increased during cooking of fillets. The results of sensory properties were showed that the texture, odour, flavor, colour and overall likeness properties improve likeness score to some extent in deep-frying method and there were not significantly different between boiling, poaching and pan-frying.
