Investigating the Physicochemical Properties of Functional Cheese Sauce Powder Containing Date Kernel Extract and Whey Powder
Volume 20, Issue 5, November and December 2024, Pages 517-531
https://doi.org/10.22067/ifstrj.2023.83169.1267
Fatemeh Ghorbanpour, Vahid Hakimzadeh, Hassan Rashidi
Abstract Introduction
One of the relatively new dairy products is cheese sauce, which can increase the consumption of cheese per capita and replace unhealthy sauces. Process functionality achieved by adding useful compounds to food in order to improve properties of foods while maintaining its appearance. Nowadays, due to the importance of some compounds such as essential fatty acids, antioxidants and fiber, the demand for consuming products containing these compounds in the diet is increasing. Date kernel extract contains fiber, antioxidants, lignans and essential fatty acids. Also, date kernels contain micronutrient such as selenium, iron, calcium, phenolic compounds, sterols, tocopherols, metal ions and essential amino acids. The functional properties of phenolic compounds and flavonoids in date kernels have also been proven. On the other hand, whey as a by-product in dairy plants has many nutritional properties and contains many essential and functional amino acids. In addition to the nutritional properties of whey powder, its technological properties such as creating viscosity are considered important in sauces formulation. The purpose of this research was to prepare cheese sauce using such compounds so that while preparing a useful product, it is possible to prevent the wastage of valuable by-products.
Materials and Methods
In this research, in order to prepare cheese sauce powder, the homogenized mixture was turned into powder by a spray dryer at 180°C. During the treatment of samples, date kernel extract was formulated at three levels of zero (control), 5 and 15%. In the treatments, one sample without whey and another sample with 15% of the final formula was considered. The effect of Date kernel extract and whey on the physicochemical properties of cheese sauce powder samples were investigated by determining solubility, dry matter, protein, total phenol, pH, viscosity and antioxidant activity. The organoleptic properties of samples, were also studied in 5-hedonic points. The results were analyzed in the form of a completely randomized design with 6 treatments and 3 replications. The software used was SPSS and the comparison of mean was done by Duncan's method at the 5% level. Graphs were plotted using Excel software.
Results and Discussion
The results showed that increasing the level of date kernel extract in the formulation of cheese sauce powder containing whey led to the improvement of the antioxidant power of cheese sauce and its phenolic compounds due to the presence of compounds such as gallic acid and cysteine amino acids in whey. High levels of date kernel extract in the presence of whey improved its solubility due to the increase in the amount of protein and dry matter of the sauce powder. It was also observed in the results obtained from the viscosity measurement that the presence of whey along with the date kernel extract reduced the viscosity by adjusting the percentage of carbohydrates. The result obtained in relation to the reduction of protein percentage in the conditions of simultaneous use of whey and date kernel extract was probably due to the precipitation of whey proteins based on the interaction with the carbohydrate components of date kernel extract leading to formation of unsolved products during the drying process. The presence of protein and essential amino acids, carbohydrates and fiber, mineral salts, vitamins and antioxidants in the final product increased the percentage of dry matter in samples containing high percentage of extract along with whey. Changes in pH were also not significant in different treatments. Overall, the results showed that the use of seemingly useless compounds can be significantly effective on the properties of cheese sauce and improve the properties of cheese sauce and finally produce a functional product.
Optimization of Formulation of UF White Cheese with Flaxseed Oil as Milk Fat Replacer by Using of Response Surface Methodology
Volume 14, Issue 4, September and October 2018, Pages 645-655
https://doi.org/10.22067/ifstrj.v1396i0.64148
Samaneh Joodi Attar, Vahid Hakimzadeh, Hassan Rashidi
Abstract Introduction: Cheese is a dairy product that commonly used and has lots of variety in the world. Among the various types of cheese, UF cheese is attracting more consumers in Iran. The need to change the flavor and make a diversity in this product has been considered for long time. Since high fat foods such as cheese are the main cause of some disorders like cordial disease, cancer, obesity and diabetes, formulation of dairy products with modified fat or fat replacer was considered by many researchers and suppliers. Vegetable oils can be used as a substitute for milk fat in cheese. Flaxseed oil consists high level of alfa-linolenic acids (Omega-3) and suitable amount of proteins could noticed as a fat replacer. In this study, we investigated the effect of milk fat replacement with flaxseed oil on the production of functional Feta cheese. The rheological, physicochemical, and organoleptic characteristics of such cheese and its optimal formulation were also determined Materials and methods: The effect of Flaxseed oil (FSO) at a range of 0-100 % and whey protein concentrate (WPC) (0-15%) was investigated on pH, synersis, Dry Matter, hardness, springiness as physicochemical and mechanical properties and mouth feeling, odor, taste overall acceptance as organoleptic properties of UF cheese production by RSM. For the preparation of cheese, a free fat retentate powder was used. To adjust fat to 20%, cream was used with 70% flaxseed oil and homogenized by ultraturrax method. All of the physicochemical, mechanical and organoleptic tests accomplished according to theIranian national Standards/ Results and discussions: Results showed that by increasing the amount of FSO in the formulation of cheese, pH, stiffness and synersis increased. Also, with increasing flaxseed oil, the elasticity was initially decreased and increased in greater quantities afterward. However, by increasing the WPC, the elasticity decreased. The increase of flaxseed oil had a reversible effect on the taste, smell, color and overall cheese acceptance score compared with the control samples due to the presence of some impurities in oil. Increasing the amount of WPC and FSO also caused a decrease in pH and fat during ripening of cheese. Although increasing the level of WPC improved the odor of cheese, but did not have positive effect on appearance, color and general acceptance. The result of optimization of UF cheese production with the following indices: pH 4.82%, synersis 1.35%, fat 20.3%, dry matter 32.45%, hardness 631.46 nm, elasticity 0.94 mm, color 3.4, Odor 3.1, flavor 2.8, texture 3.1 and final acceptance 3.11, showed that the best formulation needs 96.01% of flaxseed oil and 9.73% whey protein concentrate. Finally, the predicted optimal formula by software was also determined as follow: pH 4.78, synersis 1.27%, fat content 19.8%, dry matter 31.4%, the firmness index 618.02, the elasticity 1.03 mm, and the sensory scores included color 3.4 , odor 3.15, Taste 2.97, Texture 3.64 and Final acceptance 3.21.
Evaluation and Optimization of Chemical and Sensory Properties of Various Formulations of Recombined UF-Feta Cheese Analogues Using Response Surface Methodology
Volume 10, Issue 2, Summer 2014
https://doi.org/10.22067/ifstrj.v10i2.37815
Aliakbar Gholamhosseinpour, Mostafa Mazaheri Tehrani, Seyed Mohammad Ali Razavi, Hassan Rashidi
Abstract In this research, a mixture of MPC, WPC, SMP, Soy milk, Margarine, Butter and water was used for production of UF-Feta cheese analogue.Variables were MPC (8%, 9%, 10%), WPC (0%, 1.5%, 3%), soy milk (5%, 10%, 15%) and margarine (0%, 5%, 10%). Chemical (total solids, protein, acidity) and sensory (color and appearance, aroma, texture, flavor, total acceptance) properties of Samples were analyzed 3 days post- manufacture.The central composite design (CCD) was employedand the results were analyzedusing response surface methodology (RSM). Coefficients of determination, R2, of fitted regression models for mentioned variables ranged between 84.94-99.99 and the lack-of-fit was not significant for all response at 95%. Hence, the models for all the response variables were highly adequate.The results showed that the optimum processing conditions for producing cheese with standard total solids and protein content and highest overall values for the sensory properties were: 9.13% MPC, 3% WPC, 15% soy milk and 7.65% margarine.
The Effect of Fat-Reduction and Cacl2 Levels on Sensory and Textural Characteristics of UF-Feta Cheese Made from Retentate Powder of Milk Ultra-Filtration
Volume 7, Issue 3, Autumn 2011
https://doi.org/10.22067/ifstrj.v7i3.10128
Hassan Rashidi, Mostafa Mazaheri Tehrani, Seyed Mohammad Ali Razavi, Mohsen Ghods rohani
Abstract There is overwhelming scientific evidence that saturation fat consumption increases the risk of both coronary and cancer disease. As a result, fat reduction in UF-Feta cheese (≈ 45% fat in dry matter content) is favorable but unfortunately has some negative effects on the quality of cheese. In this research, the effect of different levels of retentate fat (0, 2, 6, 10, 14 and 18%) and CaCl2 (0 and 0.02%) on sensory (texture, taste, odor, total acceptance) and mechanical texture (texture profile analysis and penetration parameters) characteristics of UF-Feta cheese made from retentate powder was studied. The completely randomized design with two factors was used for production and data analyzing. The results of sensory test showed that cheese sample containing 10% fat retentate and 0.02% CaCl2 had highest texture score with significant difference. Therefore, the panelists were preferred taste and odor of full-fat samples and the maximum total acceptance was belonged to cheese sample made from 14% fat retentate. In texture profile analysis, fat reduction was resulted in significant decrease in gumminess, chewiness, adhesiveness, springiness and compression work but cohesiveness of samples didn’t have any significant differences. In penetration test, hardness, apparent modulus of elasticity, adhesiveness force, adhesiveness and penetration force were decreased with fat reduction. As a result, addition of 0.02% CaCl2 to retentate was increased generally the texture profile analysis and penetration parameters. Keywords: CaCl2, Cheese, Fat reduction, Feta, Texture
