Food Technology
Ali Akbar Shokouhian; Shahriyar Einizadeh; Mehrdad Dashti
Abstract
IntroductionCherry, with the scientific name Prunus avium L., is one of the most important stone fruit trees in temperate regions, belonging to the Rosaceae family and the Prunoideae subfamily. Edible coatings are thin layers of materials that are used on the surface of the product and are an alternative ...
Read More
IntroductionCherry, with the scientific name Prunus avium L., is one of the most important stone fruit trees in temperate regions, belonging to the Rosaceae family and the Prunoideae subfamily. Edible coatings are thin layers of materials that are used on the surface of the product and are an alternative to protective wax coatings. Chitosan is a coating that has a polysaccharide structure and is composed of glucosamine and N-acetylglucosamine units and is obtained from the shell of crustaceans such as crabs and shrimps. Clear, odorless, non-sticky gel with high and firm absorption power is extracted from the inner parts of aloe vera plant leaves. Between this gel and the outer skin of the leaf, there are special cells that contain a yellow liquid and when this liquid dries, aloe vera juice is produced. This gel is completely healthy and compatible with the environment, and its pH is about 4.5, which can replace various fruit coatings in the post-harvest stage. The purpose of this research was to investigate the combined effect of aloe vera gel and chitosan in maintaining the quality characteristics post harvesting and increasing the shelf life of Lombard cherry fruit. Materials and MethodsLambert black cherry fruit was obtained from the garden complex of Moghan Agriculture and Animal Husbandry Company located in Pars Abad city of Ardabil province. they were immediately transferred to the Postharvest Physiology Laboratory, Department of Horticultural Sciences, Faculty of Agriculture and Natural Resources, Mohaghegh Ardabili University, for the desired treatments.This study aimed to extend the shelf life of cherry fruit with two edible chitosan coatings (0, 0.5, 1, 1.5% w/w) and aloe vera gel (0, 15%, 30%, 45% w/w) was performed as factorial in a completely randomized design in three replications. The measured parameters were soluble solids, vitamin C, total acidity, anthocyanin, starch, weight loss and firmness of fruit tissue that were evaluated at harvest time and 45 days after harvest. Results and DiscussionThe results of analysis variance showed that the effect of time had significant on cherry fruit flavor (P<0.01). The use of Aloe vera gel had a significant effect (P<0.01) on soluble solids, starch, firmness, fruit flavor and also weight loss (P<0.05). The effect of chitosan treatment also were significant on total soluble solids, starch, firmness, and fruit flavor (P<0.01). Moreover, Interaction effect of aloe vera gel and chitosan treatments on total soluble solids, starch, firmness, and fruit flavor were significant (P<0.01) during at storage time. The compare means showed that the ratio of soluble sugars to total acid was increased. The highest soluble solids and their ratio to total acid were obtained as a result of the using of 45% aloe vera gel with 0.5% chitosan coating. Combining of aloe vera gel with 30% and 45% concentrations with chitosan at 1% and 1.5% were able to maintain better firmness of fruit tissue compared to other treatments during storage time.The highest residual starch in the fruit was obtained in using aloe vera gel treatments at concentrations of 15%, 40% and 45% with 1% chitosan during storage. Also, the use of aloe vera gel (all three levels) was exceled compared to control on fruit weight loss. By reducing the activity of ethylene, chitosan causes a delay in ripening and aging and as a result reduces the firmness of the fruit. Aloe vera gel reduces the activity of pectin methylesterase, poly-galactronase and beta-galactosidase. These enzymes destroy the cell wall and soften the fruit. ConclusionThe interest in using edible coatings to maintain the optimum quality of fruits during the marketing and storage process has increased. Edible coatings can act as a barrier, thereby reducing quality loss, inhibiting gas exchange, controlling respiration rates, and preventing the growth of microorganisms that cause fruit decay. The results clearly indicated the preservation of the quality of cherry fruit with the use of edible coatings compared to the control. The use of the treatment combination of chitosan at a concentration of 1.5% with aloe vera at a concentration of 45% has had a positive and significant effect to maintain the quality of cherry fruit after harvesting. Therefore, the use of this treatment combination is recommended to increase the storage life and maintain the quality of Lambert cherry fruit during the storage period.
Food Engineering
Samaneh Monajem; Ali Ganjloo; Mandana Bimakr
Abstract
Conclusion: Based on the findings of the current study, the 75% v/v A. vera gel coating could be a promising natural coating agent for preservation of bioactive compounds of cherry tomatoes during the postharvest life especially at storage temperature of 5 ºC.
Read More
Conclusion: Based on the findings of the current study, the 75% v/v A. vera gel coating could be a promising natural coating agent for preservation of bioactive compounds of cherry tomatoes during the postharvest life especially at storage temperature of 5 ºC.
Food Technology
Khadije Sadat Tabatabae; Mohammad Fazel
Abstract
Introduction: Nowadays, lack of time and busy work schedules have led to increase the demand for ready-to-eat foods. Furthermore, as cardiovascular diseases are on the rise in the world including our country, with nearly 40 percent of deaths being linked to these diseases, there is a growing demand for ...
Read More
Introduction: Nowadays, lack of time and busy work schedules have led to increase the demand for ready-to-eat foods. Furthermore, as cardiovascular diseases are on the rise in the world including our country, with nearly 40 percent of deaths being linked to these diseases, there is a growing demand for low-fat products. The main purpose of the deep frying process is to preserve the aroma and flavor of the ingredients in a crispy crust by immersing the food in hot oil. Frying at high temperatures affects the transfer of mass and heat, which causes some of the water to evaporate and be removed from the product, and the oil is moved into the product, replacing the extracted water. This study aims to use methods that reduce the absorption of oil in the fried product, which can reduce health concerns and increase consumer acceptance of the product. Materials and methods: In this study, a day-old chicken breast fillets were used to prepare the samples. The weight of the samples was between 14.5 and 15 grams, with a diameter of 3.7. Coating solutions include aloe vera gel powder at three levels of 1.5, 3, and 4.5 % (w / v) and whey protein concentrate (WPC) at three levels of 2.5, 5 and 7.5 % (w / v), made with distilled water at 25C. Baguette bread was also used to make breadcrumbs. To coat the chicken breast fillet, the samples were immersed in the coating solution (control samples in distilled water) for 1 minute and then placed in breadcrumbs. After preparation, the samples were fried in an automatic fryer at a controllable temperature of 140 C for 6, 8, and 10 minutes, then the samples were cooled to room temperature for 10 minutes and tested for physicochemical properties. The tests included coating, weight loss, moisture content according to the standard AACC method, adsorption of oil by standard method AOAC, tissue measurement test based on the stiffness of the chicken tissue cutting (catching test), and color analysis of chicken samples using CIE Lab colorimetric system through the determination of color characteristics were performed. Results & discussion: The results showed that the coated samples increased the absorption of the coating glaze due to the increasethe viscosity and thus the absorption of baking powder compared to the non-coated sample. The coating with hydrochloric materials based on barrier properties through strong hydrogen bonds between water molecules forms a gel layer with a high water holding capacity that prevents moisture from escaping. This subsequently reduces weight loss. Moreover, due to the inverse relationship between water and oil content, oil absorption was significantly decreased (p<0.01). Among the studied coatings, the highest moisture retention rate and the lowest oil absorption rate are related to the coated sample with 4.5% aloe vera and 7.5% WPC. As the concentration of aloe vera increased, the hardness of the samples decreased, which may depends on the effect of the meat protein to polysaccharide ratio. As the concentration of WPC increased, the stiffness of the samples increased, increasing the sulfhydryl groups, increasing the disulfide bonds in the meat's myofibrillar protein, and thus increasing the tissue stiffness. Increasing the frying time reduced the moisture and increased the oil absorption, weight loss, and stiffness of the samples. The coating reduces brightness due to the presence of various phenolic pigments, especially light- and heat-sensitive anthraquinones in aloe vera and lactose in WPC, and Maillard's reaction at high processing temperatures, resulting in increased browning index and darkening with increasing product color time. This is correlated with the Maillard reaction. Coating with aloe vera gel and WPC is effective in improving the physicochemical properties of fried chicken.
Elham Azarpazhooh; Parvin Sharayei; Farzad Gheibi
Abstract
Introduction: The current study was carried out to investigate the kinetics of infusion of phenolic compounds extracted from grape pomace (Argol) into Aloe vera gel cylinders. Aloe vera gel was treated at 50 °C in different osmotic solution with (40, 50 and 60) % sucrose plus (10, 20 and 30) % Argol, ...
Read More
Introduction: The current study was carried out to investigate the kinetics of infusion of phenolic compounds extracted from grape pomace (Argol) into Aloe vera gel cylinders. Aloe vera gel was treated at 50 °C in different osmotic solution with (40, 50 and 60) % sucrose plus (10, 20 and 30) % Argol, for 0–120 min. The fruit to solution ratio was kept 1:4 (w/w) during all experiments. A two parameters model was used for prediction of kinetics of mass transfer and values of equilibrium moisture loss and solid gain. Moisture and solid effective diffusivities were estimated using Fick’s second law of diffusion. Results showed that Azuara model has the potential for estimating the equilibrium points. In addition, a good correlation between predicted and experimental values were obtained by this model. Besides, moisture and solid effective diffusivities increased by increasing sucrose solution and Argol from 40 to 50 percentage and 10 to 20 percentages, respectively. Moisture and solid diffusivities were found in the range of 0.61–4.23×10−9 m2/s and 2.13 –2.77 × 10−9 m2/s, respectively. Functional food is an emerging field in food science due to its increasing popularity with health-conscious consumers and the ability of marketers to create new interest in existing products. New by-product application should be investigated to have a positive environmental impact or to turn them into useful products. The use of by-product such as the grape juice pomace (Argol), results in the return of these valuable sources into the food cycle as well as an improvement in nutritional value and functional products in the food industry. Red grape (Vitis vinifera L.) pomace contains a large amount of polyphenolic compounds, therefore extraction of bioactive compounds promote human health. It is not as easy to mix the functional ingredient in the solid system as it is, in the case of the powder and liquid products. With the help of osmotic dehydration, many researchers have demonstrated the infusion of active compounds such as mineral, phenolic compounds, curcuminoids, probiotics and vitamins into solid food tissue. Fruits such as aloe vera, which have a short shelf life and are suitable system models for infusion of phenolic compounds during osmotic dehydration. Osmotic dehydration can prove useful in drying aloe vera (Aloe Barbadensis Miller) which contains several nutritional compounds, including polysaccharides, phenolics, antioxidants, vitamins, enzymes, minerals, and so forth. The phenomenon of osmotic dehydration can be modeled by the fundamentals of mass transfer that describe the origin of the diffusive forces that are involved in and control these processes. A two-parameter equation of Azuara was used to predict the kinetics of osmotic dehydration and the final equilibrium point. The internal mass transfer occurring during osmotic dehydration of food is usually represented by Fick’s second law which is the best known phenomenological model to represent the diffusional mechanism is the model of Crank, consisting of a set of solutions of Fick’s law of diffusion for different geometries, boundary conditions and initial conditions. To date, there is no research on mass transfer during osmotic dehydration of aloe vera. Therefore, the objective of the present work was the infusion of Argol phenolic compounds in alo vera gel through osmotic dehydration treatment to investigate mass transfer during osmotic treatment.
Material and methods: The Aloe Vera was added to agar and shaped into cylindrical pieces (20×20 mm). Afterwards the pieces were floated in a solution of sugar (40, 50 and 60) percentage and Argol (10, 20 and 30) percentage. The weight ratio of osmotic medium to fruit sample was 4:1 to avoid significant dilution of the medium and subsequent decrease of the driving force during the process. The experiment was performed with constant temperature of 50 °C. Samples were removed from the solution at 30, 60, 90, 180, and 120 min of immersion, drained and the excess of solution at the surface was removed with absorbent paper. Afterward, the dehydrated samples from each group were drained and blotted with absorbent paper to remove excess solution. Each assay was made in triplicate. Weight and moisture content of the samples, and moisture loss (ML) and solid gain (SG) were calculated. The curves of moisture loss and salt gain as a function of time were constructed using experimental data. A two parameters model was used for prediction of kinetics of mass transfer and values of equilibrium moisture loss and solid gain. Moisture and solid effective diffusivities were estimated by using Fick’s second law of diffusion.
Results and discussion: Results showed that in all of the studied conditions, the levels of moisture loss and solid gain had a non-linear increase with more floatation time in the solution. Moreover, the absorption rate of solid gain was faster in the beginning but eventually slowed down. Azuara model has the potential in estimating the equilibrium points. In addition, a good correlation between predicted and experimental values was obtained by this model. Besides, increasing the concentration of sucrose and Argol from 40% to 50% and 10% to 20% respectively, the coefficient of effective penetration for both parameters (water loss and solid substance absorption) improved. In addition, the coefficient of effective penetration displayed that different levels of sucrose and Argol had a notable effect on this coefficient.
Aryou Emamifar; Sudabeh Bavaisi
Abstract
The effects of mixed coating based on aloe vera (AG) and gum tragacanth (GT) on the microbial, physicochemical and sensorial properties of fresh strawberries were evaluated during 20 days of storage (1 oC, 95 % RH) compared to uncoated fruits. The coating solutions were prepared by mixing solution of ...
Read More
The effects of mixed coating based on aloe vera (AG) and gum tragacanth (GT) on the microbial, physicochemical and sensorial properties of fresh strawberries were evaluated during 20 days of storage (1 oC, 95 % RH) compared to uncoated fruits. The coating solutions were prepared by mixing solution of AG diluted 1:3 with distilled water and GT solution (0.6 % w/v in distilled water) at different concentrations (25 % AG +75 % GT, 50 % AG +50 % GT and 75 % AG +25 % GT). Microbial stability (fungi (yeasts and molds) and total aerobic bacteria), physiochemical characteristics (ascorbic acid (AA), weight loss, firmness, titratable acidity, soluble solid content (SSC), anthocyanin content, total phenolic and antioxidant activity) and sensory attributes (color, taste, odor and overall) of the samples were evaluated after 0, 4, 8, 12, 16 and 20 days of storage compared to uncoated fruits. Comparing with untreated fruits, 50 % AG +50 % GT treatment significantly (p
Mahdi Moradi; Mehrdad Niakosari; Armaghan Etemadi
Abstract
This research, presents mathematical modeling of drying process of Aloe vera slices with dimensions of 7×4×0.5±0.1 cm. Peeled Aloe vera slices with the initial moisture content of 5750% (d.b) were osmosed for 5 hours in NACL solution of 10% and temperature of 40 °C at a constant ...
Read More
This research, presents mathematical modeling of drying process of Aloe vera slices with dimensions of 7×4×0.5±0.1 cm. Peeled Aloe vera slices with the initial moisture content of 5750% (d.b) were osmosed for 5 hours in NACL solution of 10% and temperature of 40 °C at a constant solution to fruit ratio of 5:1. Osmosed and unosmosed Aloe vera samples were hot air dried at 55, 70 and 85°C with different air flow rates of 0.015, 0.036 and 0.054 m3/s for 13200s. The moisture content of Aloe vera samples were measured over different intervals of drying time (1200, 2400, 6000, 9600, 13200s) for each experiment. The experimental results were used to obtain two different dimensionless models based on Buckingham’s pi-theorem for both drying methods. To this end, three independent π terms were identified and then the relation between dependent π term and each independent π term was sought. Finally, the dimensionless models incorporating the effect of all the independent π terms on the dependent one derived and evaluated. The RMSE, (R2), MRD and MBE for the modeling of osmotic-convective drying method were calculated as 0.0185, 0.99, 0.05 and 0.034, respectively. Also these statistical parameters for the convective drying method were as: 0.027, 0.98, 0.061 and 0.051, respectively. Therefore the dimensionless models could predict the moisture content of Aloe vera samples during drying, properly.
