Investigating the qualitative, textural and sensory characteristics of low fat Iranian white cheese containing a mixture of basil seed gum with xanthan or guar

Document Type : Full Research Paper

Authors

• Mohammad Ali Hesarinejad ¹
• Atefeh Arefkhani ²
• Ali Rafe ¹
• Fatemeh Javidi ³
• Alireza Sadeghian ¹

¹ Department of Food Processing, Research Institute of Food Science and Technology (RIFST), Mashhad, Iran

² Binalood Dairy Company, 21th km Neyshabour-Mashhad road, Neyshabour, Iran

³ Department of Food Science and Technology, Ferdowsi University of Mashhad (FUM), Mashhad, Iran

https://doi.org/10.22067/ifstrj.v17i4.87437

Abstract

Introduction: Improving the texture and sensory properties of Iranian white cheese by reducing fat content is one of the most important issues that are considered both technologically and economically. Meanwhile, controlling the amount of water absorption in cheese usually causes textural problems in cheese, including the softness of the cheese texture. Therefore, this problem will be solved if the amount of water absorption in the cheese can be controlled in such a way that the resulting cheese texture does not change and even its quality improves. Currently, the demand for the use of compounds or methods to achieve this goal is increasing. Hydrocolloids are compounds that, due to their inherent nature in absorbing water and creating a mouth-feel like fat, can have a special effect on fat replacement. Therefore, creating a suitable formula in the composition of hydrocolloids can complement the qualitative improvement of cheese texture. Basil seed gum (BSG) is a native hydrocolloid that has shown good stability and emulsifier properties, making it a potential functional ingredient in the food industry. Xanthan gum (XG) is also used in food as a thickener and stabilizer, and also can acts as a gelling agent along with other gums. In this study, by creating a suitable formulation in the use of these hydrocolloids, an attempt is made to improve the texture and sensory properties of cheese.
 
Materials and methods: The effect of different concentrations of mixed-hydrocolloids based on XG/BSG, and Guar gum (GG)/BSG on the textural attributes of Iranian white cheese was investigated. Four cheese treatments (without hydrocolloids or with 0.25, 0.5, or 0.75 g/kg of milk) were produced to study the effects of hydrocolloid content on the textural properties of the product. Cheese samples were analyzed with respect to physicochemical, color, sensory characteristics, textural properties, and microstructure.
 
Results and discussion: The results showed that the higher concentration of hydrocolloids from 0 to 0.075% used, the higher the increasein the moisture content of cheese samples. The results also showed that samples containing GG had higher moisture content than samples containing XG, which is probably due to the higher water absorption capacity of GG than XG. Increasing the concentration of hydrocolloids reduces the fat in the sample, which is due to the absorption and retention of more water in the cheese due to the hydrophilic properties of hydrocolloids. Samples containing GG had a lower fat content than samples containing XG. As the concentration of hydrocolloids increased, lightness increased, indicating the effect of hydrocolloids on the increase in whey cavities. The results also showed more lightness of XG samples than GG samples. Samples containing XG were more rigid, possibly confirming that this hydrocolloid has a greater effect than a mixture containing GG in the strength of the cheese and the effect of the GG is merely thickenning. With the increase in the concentration of BSG/XG (from 0.025 to 0.075%), the hardness increased from 260.96 to 364.23 g. The springiness of all samples also ranged from 0.99 to 1 mm, indicating good reversible behavior. It was found that the formula containing BSG/XG at a concentration of 0.50% had the highest overall acceptance after the sample containing BSG/XG at a concentration of 0.075%. Samples containing gum had low sensory evaluation results, possibly due to high moisture content, and were reported to be undesirable. In terms of taste, the samples did not differ significantly from each other. According to the results of textural analysis and sensory evaluation, the formula containing BSG/XG at 0.075% concentration, due to having the highest score of sensory evaluation and desirable textural characteristics, was selected as the optimal sample. In the microstructure of the desired cheese sample, the location of the whey serum has been determined. By adding hydrocolloid to the cheese, the protein matrix opens. When the sample was prepared for SEM analysis, the moisture was removed. Therefore, the effect of hydrated hydrocolloid was observed in the form of cavities. This structure has enough space to trap water and form a suitable gel.

Keywords

• Iranian white cheese
• Basil seed gum
• Xanthan
• Guar
• Quality characteristics

Main Subjects

• Food Technology

References

Afshar Nik, A., Amiri, Z. R., & Hosseini-Parvar, S. H. (2011). The Effect of Basil Seed Gum as a Fat Replacer on Physico-Chemical, Micro Structural and Sensory Properties of Low-Fat Set Yogurt. Electronic J. Food Preserv. Process.(EJFPP), 3, 23-42.

Aghdaei, S. A., Aelami, M., Jafari, S. M., & Mahoonak, A. S. (2011). Physicochemical and rheological properties of beta-glucan extracted from hull-less barlay. Iranian Food Science & Technology Research Journal, 6(4), 286-297.

Azarnia, S., Ehsani, M. R., & Mirhadi, S. A. (1997). Evaluation of the physico-chemical characteristics of the curd during the ripening of Iranian brine cheese. International Dairy Journal, 7(6-7), 473-478.

Baghdadi, F., Aminifar, M., Farhoodi, M., & Shojaee Ali Abadi, S. (2018). Study of macromolecular interactions in low‐fat brined cheese modified with Zedu gum. International journal of dairy technology, 71(2), 382-394.

Dogan, M., Toker, O. S., & Goksel, M. (2011). Rheological behaviour of instant hot chocolate beverage: Part 1. Optimization of the effect of different starches and gums. Food Biophysics, 6(4), 512-518.

Drake, M. A., Truong, V. D., & Daubert, C. R. (1999). Rheological and sensory properties of reduced‐fat processed cheeses containing lecithin. Journal of food science, 64(4), 744-747.

Ghanbari Shendi, A., Khosro-Shahi Asl, A., Mortazavi, A., & Tavakoli-Pur, H. (2011). The effect of xanthan gum on textural and rheological properties of low-fat Iranian white cheese. Journal of Food Sciences and Industries, 33(1), 35-46.

Hamann, D. D., Zhang, J., Daubert, C. R., Foegeding, E. A., & Diehl Jr, K. C. (2006). Analysis of compression, tension and torsion for testing food gel fracture properties. Journal of Texture Studies, 37(6), 620-639.

Hesarinejad, M. A., Rafe, A., Sadeghian, A., & Sarabi Jamab, M. (2020). Fabrication of elastic gel systems of Ricotta cheese containing some hydrocolloids in stuffed olive. Food Science and Technology, 17(101), 81-91.

Hojjatoleslami, M., & Azizi, M. H. (2015). Impact of tragacanth and xanthan gums on the physical and textural characteristics of gluten-free cake. Nutrition and Food Sciences Research, 2(2), 29-37.

Hosseini-Parvar, S. H., Matia-Merino, L., & Golding, M. (2015). Effect of basil seed gum (BSG) on textural, rheological and microstructural properties of model processed cheese. Food Hydrocolloids, 43, 557-567.

Koca, N., & Metin, M. (2004). Textural, melting and sensory properties of low-fat fresh kashar cheeses produced by using fat replacers. International dairy journal, 14(4), 365-373.

Lemay, A., Paquin, P., & Lacroix, C. (1994). Influence of microfluidization of milk on Cheddar cheese composition, color, texture, and yield. Journal of Dairy Science, 77(10), 2870-2879.

Madadlou, A., Khosroshahi, A., & Mousavi, M. E. (2005). Rheology, microstructure, and functionality of low-fat Iranian white cheese made with different concentrations of rennet. Journal of Dairy Science, 88(9), 3052-3062.

Madadlou, A., Khosroshahi, A., Mousavi, S. M., & Djome, Z. E. (2006). Microstructure and rheological properties of Iranian white cheese coagulated at various temperatures. Journal of Dairy Science, 89(7), 2359-2364.

Metzger, L. E., Barbano, D. M., Kindstedt, P. S., & Guo, M. R. (2001). Effect of milk preacidification on low fat Mozzarella cheese: II. Chemical and functional properties during storage. Journal of Dairy Science, 84(6), 1348-1356.

Mistry, V. V. (2001). Low fat cheese technology. International dairy journal, 11(4-7), 413-422.

Morris, E. R., Rees, D. A., Robinson, G., & Young, G. A. (1980). Competitive inhibition of interchain interactions in polysaccharide systems. Journal of molecular biology, 138(2), 363-374.

Morris, E. R. (1990). Mixed polymer gels. In Food gels (pp. 291-359). Springer, Dordrecht.

Nateghi, L., Roohinejad, S., Totosaus, A., Rahmani, A., Tajabadi, N., Meimandipour, A, & Manap, M. Y. A. (2012). Physicochemical and textural properties of reduced fat Cheddar cheese formulated with xanthan gum and/or sodium caseinate as fat replacers. J. Food Agr. Environ, 10, 59-63.

Nattaghi, L. (2020). Influence of basil and xanthan gum on physicochemical and tissue properties of Iranian low-fat white cheese. Journal of Innovation in Food Science and Technology, 12(1), 27-45.

National Standard 760: 1349, Determination of fat content of the cheese and the cheese has melted.

National Standard 2852: 1385, milk and its products - Determination of acidity and pH-test.

National Standard 9188-1: 1394, the amount of protein in cheese is melted.

National Standard 1753: 1381, Cheese and processed cheese - Determination of dry matter content (Reference method)

Paulson, B. M., Mcmahon, D. J., & Oberg, C. J. (1998). Influence of sodium chloride on appearance, functionality, and protein arrangements in nonfat Mozzarella cheese. Journal of Dairy Science, 81(8), 2053-2064.

Rafe, A., Razavi, S. M., & Farhoosh, R. (2013). Rheology and microstructure of basil seed gum and β-lactoglobulin mixed gels. Food Hydrocolloids, 30(1), 134-142.

Rahimi, J., Khosrowshahi, A., Madadlou, A., & Aziznia, S. (2007). Texture of low-fat Iranian white cheese as influenced by gum tragacanth as a fat replacer. Journal of dairy science, 90(9), 4058-4070.

Rashidi, H., Mazaheri-Tehrani, M., Razavi, S. M. A., & Ghods-Rohany, M. (2015). Improving Textural and Sensory Characteristics of L ow-Fat UF Feta Cheese Made with Fat Replacers. Journal of Agricultural Science and Technology, 17 (1), 121-132.

Razavi, S. M., Mortazavi, S. A., Matia‐Merino, L., Hosseini‐Parvar, S. H., Motamedzadegan, A., & Khanipour, E. (2009). Optimisation study of gum extraction from Basil seeds (Ocimum basilicum L.). International journal of food Science & Technology, 44(9), 1755-1762.

Razi, S. M., Motamedzadegan, A., Shahidi, A., & Rashidinejad, A. (2018). The effect of basil seed gum (BSG) on the rheological and physicochemical properties of heat-induced egg albumin gels. Food Hydrocolloids, 82, 268-277.

Romeih, E. A., Michaelidou, A., Biliaderis, C. G., & Zerfiridis, G. K. (2002). Low-fat white-brined cheese made from bovine milk and two commercial fat mimetics: chemical, physical and sensory attributes. International Dairy Journal, 12(6), 525-540.

Rudan, M. A., Barbano, D. M., & Kindstedt, P. S. (1998). Effect of fat replacer (Salatrim) on chemical composition, proteolysis, functionality, appearance, and yield of reduced fat Mozzarella cheese. Journal of Dairy Science, 81(8), 2077-2088.

Rudan, M. A., Barbano, D. M., Yun, J. J., & Kindstedt, P. S. (1999). Effect of Fat Reduction on Chemical Composition, Proteolysis, Functionality, and Yield of Mozzarella Cheese1. Journal of dairy science, 82(4), 661-672.

Saha, D., & Bhattacharya, S. (2010). Hydrocolloids as thickening and gelling agents in food: a critical review. Journal of food science and technology, 47(6), 587-597.

Salari, S., Zanganeh, M., Fadavi, A., & Ahmadi, Z. (2017). Effect of xanthan gum and carboxymethyl cellulose on chemical and sensory properties of cream cheese. International Journal of Advancements in Technology, 8(1), 175-180.

Sattar, M. U., Sameen, A., Huma, N., & Shahid, M. (2016). Fat Mimetic Impact of Xanthan Gum on the Quality Attributes of Low Fat Mozzarella Cheese. Transylvanian Review, (1).

Sheehan, J. J., Huppertz, T., Hayes, M. G., Kelly, A. L., Beresford, T. P., & Guinee, T. P. (2005). High pressure treatment of reduced-fat Mozzarella cheese: Effects on functional and rheological properties. Innovative Food Science & Emerging Technologies, 6(1), 73-81.

Sohini, R., Utpal, R., & Runu, C. (2015). Effect of hydrocolloid (xanthan gum) and storage time on overall quality of cocoa incorporated fermented food. Int. Res. J. Biol. Sci, 4(5), 7-14.

Szczesniak, A. S. (2002). Texture is a sensory property. Food quality and preference, 13(4), 215-225.

Turk, S. Š., & Schneider, R. (2000). Printing properties of a high substituted guar gum and its mixture with alginate. Dyes and Pigments, 47(3), 269-275.

Van den Berg, L., Van Vliet, T., Van der Linden, E., Van Boekel, M. A. J. S., & Van de Velde, F. (2007). Breakdown properties and sensory perception of whey proteins/ polysaccharide mixed gels as a function of microstructure. Food Hydrocolloids, 21(5-6), 961-976.

Volikakis, P., Biliaderis, C. G., Vamvakas, C., & Zerfiridis, G. K. (2004). Effects of a commercial oat-β-glucan concentrate on the chemical, physico-chemical and sensory attributes of a low-fat white-brined cheese product. Food research international, 37(1), 83-94.

Wielinga, W. C. 2000. Galactomannans. In Phillips, G. O. and Williams, P. A. (Eds), Handbook of Hydrocolloids. Chapter 8. Cambridge England: Woodhead Publishing Limited.

Zalazar, C. A., Zalazar, C. S., Bernal, S., Bertola, N., Bevilacqua, A., & Zaritzky, N. (2002). Effect of moisture level and fat replacer on physicochemical, rheological and sensory properties of low fat soft cheeses. International Dairy Journal, 12(1), 45-50.

Zhang, Y. H., & Huang, L. H. (2014). Effect of heat-induced formation of rice bran protein fibrils on morphological structure and physicochemical properties in solutions and gels. Food Science and Biotechnology, 23(5), 1417-1423