با همکاری انجمن علوم و صنایع غذایی ایران

نوع مقاله : مقاله پژوهشی فارسی

نویسندگان

1 گروه مکانیک بیوسیستم، دانشکده کشاورزی، دانشگاه فردوسی مشهد، ایران.

2 سازمان جهاد دانشگاهی خراسان رضوی

3 گروه مهندسی شیمی، دانشگاه اتاوا، اتاوا، آنتاریو، کانادا

چکیده

در این پژوهش، برای بهبود ویژگی‌های فیلم‌های بر پایه پلی‌وینیل الکل (PVA) از دو نوع نانوذره دی‌اکسید تیتانیوم (TiO2) (۱و۲ درصد وزنی) و مونت موریلونیت (MMT) (۲و ۴ درصد وزنی) به‌صورت توأم استفاده گردید و سپس تأثیر این دو نانوذره بر خواص مکانیکی (مدول یانگ و مقاومت کششی)، ویژگی‌های رنگ (تفاوت رنگ‌سنجی کل و ضریب سفیدی) و میزان عبور نور در فیلم‌ها توسط روش سطح پاسخ (RSM) موردبررسی قرار گرفت. جهت تعیین مشخصات فیلم‌ها از تکنیک‌های مختلفی نظیر پراش اشعه ایکس و میکروسکوپ الکترونی روبشی استفاده شد. الگوهای پراش X نشان دادند که نانوذرات به‌خوبی در ماتریس پلیمر پخش شده‌اند و ریزساختار فیلم‌های PVA/TiO2 و PVA/MMT از نوع لایه‌لایه می‌باشد. همچنین میکروگراف‌های SEM توزیع خوبی از نانوذرات را در غلظت کم نشان دادند، درحالی‎که در غلظت‌های بالا تجمع نانوذرات مشاهده شد. در این پژوهش اثر خطی نانوذرات MMT و اثر متقابل TiO2 و MMT بر مقاومت کششی معنی‌دار بود (۰۵/۰>P)، درحالی‌که اثر خطی، درجه دوم و اثر متقابل هر دو نانوذره بر مدول یانگ معنی‌دار بود (۰۱/۰>P) و در حالت کلی مقادیر بهینه TiO2 و MMT به‌ترتیب ۱% و ۴% برای خواص مکانیکی به‌دست آمد. همچنین وجود هردو نانوذره در ماتریس پلیمر بر میزان عبور نور از فیلم و ΔE مؤثر و معنی‌دار بود (۰۱/۰>P). با بررسی سفیدی فیلم‌ها فیلم نانوکامپوزیتی با ترکیب ۲% از TiO2 و ۴% از MMT از نظر ظاهری سفیدتر از سایر نمونه‌ها و در حقیقت کدرتر گزارش شد. با بررسی نتایج مختلف آزمایشگاهی و تحلیل آن‌ها با روش سطح پاسخ نمونه بهینه از نظر خواص مکانیکی و فیزیکی نمونه‌ای با TiO2 ۵/۰% و MMT ۴%  پیشنهاد شد.

کلیدواژه‌ها

موضوعات

عنوان مقاله [English]

Optimizing mechanical and optical properties of nanocomposite films based on polyvinyl alcohol for food packaging

نویسندگان [English]

  • Maryam Zamanian 1
  • Hassan Sadrnia 1
  • Mehdi Khojastehpour 1
  • Fereshteh Hosseini 2
  • Jules Thibault 3

1 Biosystems Engineering Department, Ferdowsi University of Mashhad. Iran

2 Food Science and Technology Research Institute, ACECR, Khorasan Razavi, Iran

3 Department of Chemical and Biological Engineering, University of Ottawa, Ottawa, Ontario, Canada

چکیده [English]

Introduction: Among the different types of polymers used for packaging and coating, polyvinyl alcohol (PVA), given its very enviable properties, has been used in various industrial applications. It is used for instance as controlled release in pharmaceutical elements, paper, textile and food supplement coating due to its good physical properties, chemical resistance, thermostability, film-forming capability, efficiency and biodegradability. The aim of this work was to examine the combined effect of montmorillonite (MMT) platelets and titanium oxide (TiO2) spherical nanoparticles on the physical and mechanical properties of PVA/ TiO2/MMT nanocomposites, and to determine the optimal combination to provide good properties, using response surface methodology (RSM).
 
Materials & methods: PVA, PVA/TiO2, PVA/MMT and PVA/ TiO2/MMT nanocomposite films were prepared by the solution casting method. For each sample, 1.8 g of PVA was dissolved in 50 mL deionized water and maintained for 24 h at room temperature. The mixture was then heated to 90˚C and stirred using a magnetic stirrer up to 3 h to ensure the complete dissolution of PVA, followed by cooling down the solution to room temperature. Various amounts of TiO2 nanoparticles (1 and 2 w% on a dry basis) were added to deionized water and agitated with a stirrer for 12 h at 500 rpm. This method was also used for MMT (2 and 4 w% on a dry basis). The nanoparticle suspension was subjected to ultrasonic homogenization for 20 min to ensure a good dispersion. The 50 mL nanoparticle suspension was added to the PVA solution drop by drop during a period of 5 min while maintaining intense stirring (1000 rpm). Mixing was continued and glycerol (30 w% based on the polymer) was added. Vacuum with a rotary vacuum pump was applied to remove air bubbles from the solution. The solution was poured into a 15-cm internal diameter Petri dish with a perfectly flat bottom and carefully aligned horizontally. Homogeneous films were peeled off after drying in an air oven at 40˚C for 72 h. Scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD) were performed for characterizing the morphology of nanocomposite films. The effect of these two nanoparticles on physical and mechanical properties, was evaluated by response surface methodology (RSM). A three-level factorial design was used to define the test points for the series of experiments. Among the various design alternatives suggested by theoretical algorithm, the selected design consisted of 13 experiments including five replicate central points used for variance calculation. Furthermore, PVA film data were analyzed using the Design-Expert program (Version 7.0, Stat-Ease Inc., Minneapolis, Minnesota) to find the optimum combination of constituents for the best properties.
 
Results and discusions: X-ray diffraction patterns showed that the nanoparticles were well dispersed in the polymer matrix of PVA/ TiO2 and PVA / MMT films with layered microstructure. In addition, the linear effect of MMT nanoparticles and the interaction of TiO2 and MMT on tensile strength were significant. The linear, quadratic and interaction effects of both nanoparticles on Young's modulus were also significant. In general, the optimum values of TiO2 and MMT were 1% and 4% respectively for mechanical properties. The presence of both nanoparticles had a significant effect on transparency and ΔE. Results of nanocomposite films indicated that the film with 2% TiO2 and 4% MMT has higher WI and actually is darker than other samples. By analyzing different results with response surface method, the nanocomposite film with 0.5% TiO2 and 4% MMT was proposed as optimum combination for mechanical and physical properties

کلیدواژه‌ها [English]

  • Nanocomposite
  • Poly vinyl alcohol
  • Food packaging
ابوالقاسمی فخری، ل.، قنبر زاده، ب.، دهقان نیا، ج. و انتظامی، ع. ا. ، ۱۳۹۰. اثر مونت موریلونیت و نانوبلور سلولوز بر خواص فیزیکی فیلم‌های آمیخته کربوکسی متیل سلولوز-پلی وینیل الکل. مجله علوم و تکنولوژی پلیمر, شماره ۶، صفحات 455-466.
Abdollahi, M., Alboofetileh, M., Rezaei, M., & Behrooz, R. 2013. Comparing physico-mechanical and thermal properties of alginate nanocomposite films reinforced with organic and/or inorganic nanofillers. Food Hydrocolloids, 32(2), 416-424.
Aghili, M. H. S., Emadi, B., Hosseini, F., & Sadrnia, H. 2016. Production of biodegradable edible films from tragacanth gum and determination of their physical and mechanical properties.
Ali, M. H., Kahder, M. M., Al-Saad, K. A., & Al-Meer, S. 2013. Properties of nanoclay PVA composites materials. QScience Connect, 2013(1), 1. Arora, A., & Padua, G. W., 2010. Nanocomposites in food packaging. Journal of food science, 75(1), R43-R49.
Bodaghi, H., Mostofi, Y., Oromiehie, A., Ghanbarzadeh, B., & Hagh, Z. G. 2015. Synthesis of clay–TiO2 nanocomposite thin films with barrier and photocatalytic properties for food packaging application. Journal of Applied Polymer Science, 132(14).
Chen, H. 1995. Functional properties and applications of edible films made of milk proteins. Journal of dairy science, 78(11), 2563-2583.
Cheng, L. H., Karim, A. A., & Seow, C. C. 2006. Effects of water‐glycerol and water‐sorbitol interactions on the physical properties of konjac glucomannan films. Journal of food science, 71(2), E62-E67.
Ciprari, D. L. 2004. Mechanical characterization of polymer nanocomposites and the role of interphase. Georgia Institute of Technology.   
Cyras, V. P., Manfredi, L. B., Ton-That, M.-T., & Vázquez, A. 2008. Physical and mechanical properties of thermoplastic starch/montmorillonite nanocomposite films. Carbohydrate polymers, 73(1), 55-63.
Destéfanis, H. A. 2013. Barrier properties and structural study of nanocomposite of HDPE/montmorillonite modified with polyvinylalcohol. Journal of Chemistry, 2013.
El-Shamy, A., Attia, W., & El-Kader, K. A. 2014. The optical and mechanical properties of PVA-Ag nanocomposite films. Journal of Alloys and Compounds, 590, 309-312.
Gharoy Ahangar, E., Abbaspour‐Fard, M. H., Shahtahmassebi, N., Khojastehpour, M., & Maddahi, P. 2015. Preparation and characterization of PVA/ZnO nanocomposite. Journal of food processing and preservation, 39(6), 1442-1451.
Gontard, N., Guilbert, S., & CUQ, J. L. 1993. Water and glycerol as plasticizers affect mechanical and water vapor barrier properties of an edible wheat gluten film. Journal of food science, 58(1), 206-211.
He, Q., Zhang, Y., Cai, X., & Wang, S. 2016. Fabrication of gelatin–TiO2 nanocomposite film and its structural, antibacterial and physical properties. International journal of biological macromolecules, 84, 153-160.
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. 2006. Review article: polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. Journal of composite materials, 40(17), 1511-1575.
Kaler, V., Pandel, U., & Duchaniya, R. 2018. Development of TiO2/PVA nanocomposites for application in solar cells. Materials Today: Proceedings, 5(2), 6279-6287.
Kim, S. W. 2008. Preparation and barrier property of poly (vinyl alcohol)/SiO2 hybrid coating films. Korean Journal of Chemical Engineering, 25(5), 1195-1200.
Kubacka, A., Serrano, C., Ferrer, M., Lünsdorf, H., Bielecki, P., Cerrada, M. L., & Fernández-García, M. 2007. High-performance dual-action polymer− TiO2 nanocomposite films via melting processing. Nano Letters, 7(8), 2529-2534.
Kumar, P. 2009. Development of bio-nanocomposite films with enhanced mechanical and barrier properties using extrusion processing.
Mahshid, S., Ghamsari, M. S., Askari, M., Afshar, N., & Lahuti, S. 2006. Synthesis of TiO2 nanoparticles by hydrolysis and peptization of titanium isopropoxide solution. Semiconductor Physics, Quantum Electronics & Optoelectronics, 9(2), 65-68.
Muratore, G., Nobile, D., Buonocore, G., Lanza, C., & Asmundo, N. 2005. The influence of using biodegradable packaging films on the quality decay kinetic of plum tomato (PomodorinoDatterino). Journal of food engineering, 67(4), 393-399.
Oleyaei, S. A., Almasi, H., Ghanbarzadeh, B., & Moayedi, A. A. 2016a. Synergistic reinforcing effect of TiO2 and montmorillonite on potato starch nanocomposite films: Thermal, mechanical and barrier properties. Carbohydrate polymers, 152, 253-262.
Oleyaei, S. A., Almasi, H., Ghanbarzadeh, B., & Moayedi, A. A. 2016b. Synergistic reinforcing effect of TiO2 and montmorillonite on potato starch nanocomposite films: Thermal, mechanical and barrier properties. Carbohydrate polymers, 152, 253-262.
Paralikar, S. A., Simonsen, J., & Lombardi, J. 2008. Poly (vinyl alcohol)/cellulose nanocrystal barrier membranes. Journal of Membrane Science, 320(1-2), 248-258.
Pereda, M., Amica, G., Rácz, I., & Marcovich, N. E. 2011. Structure and properties of nanocomposite films based on sodium caseinate and nanocellulose fibers. Journal of Food Engineering, 103(1), 76-83.
Ren, J., Wang, S., Gao, C., Chen, X., Li, W., & Peng, F. 2015. TiO2-containing PVA/xylan composite films with enhanced mechanical properties, high hydrophobicity and UV shielding performance. Cellulose, 22(1), 593-602.
Rhim, J.-W. 2011. Effect of clay contents on mechanical and water vapor barrier properties of agar-based nanocomposite films. Carbohydrate polymers, 86(2), 691-699.
Rhim, J.-W., & Ng, P. K. 2007. Natural biopolymer-based nanocomposite films for packaging applications. Critical reviews in food science and nutrition, 47(4), 411-433.
Rouhi, M., Razavi, S. H., & Mousavi, S. M. 2017. Optimization of crosslinked poly (vinyl alcohol) nanocomposite films for mechanical properties. Materials Science and Engineering: C, 71, 1052-1063.
Sapalidis, A. A., Katsaros, F. K., & Kanellopoulos, N. K. 2011. PVA/montmorillonite nanocomposites: development and properties. Nanocomposites and polymers with analytical methods, 29-50.
Siró, I., & Plackett, D. 2010. Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose, 17(3), 459-494.
Tang, X. 2008. Use of extrusion for synthesis of starch-clay nanocomposites for biodegradable packaging films. Kansas State University.  
Tang, X., Kumar, P., Alavi, S., & Sandeep, K. 2012. Recent advances in biopolymers and biopolymer-based nanocomposites for food packaging materials. Critical reviews in food science and nutrition, 52(5), 426-442.
Tunç, S., & Duman, O. 2010. Preparation and characterization of biodegradable methyl cellulose/ montmorillonite nanocomposite films. Applied Clay Science, 48(3), 414-424.
Venkatesan, R., & Rajeswari, N. 2017. TiO2 nanoparticles/poly (butylene adipate‐co‐terephthalate) bionanocomposite films for packaging applications. Polymers for Advanced Technologies.
Xiao-e, L., Green, A. N., Haque, S. A., Mills, A., & Durrant, J. R. 2004. Light-driven oxygen scavenging by titania/polymer nanocomposite films. Journal of Photochemistry and Photobiology A: Chemistry, 162(2-3), 253-259.
Yan, Q., Hou, H., Guo, P., & Dong, H. 2012. Effects of extrusion and glycerol content on properties of oxidized and acetylated corn starch-based films. Carbohydrate polymers, 87(1), 707-712.
Yang, C.-C., & Lee, Y.-J. 2008. Preparation and characterization of the PVA/MMT composite polymer membrane for DMFC. ECS Transactions, 13(28), 1-20.
Yousefi, A., Savadkoohi, B., Zahedi, Y., Hatami, M., & Ako, K. 2019. Fabrication and characterization of hybrid sodium montmorillonite/TiO2 reinforced cross-linked wheat starch-based nanocomposites. International journal of biological macromolecules, 131, 253-263.
Zolfi, M., Khodaiyan, F., Mousavi, M., & Hashemi, M. 2014a. Development and characterization of the kefiran-whey protein isolate-TiO2 nanocomposite films. International journal of biological macromolecules, 65, 340-345.
Zolfi, M., Khodaiyan, F., Mousavi, M., & Hashemi, M. 2014b. The improvement of characteristics of biodegradable films made from kefiran–whey protein by nanoparticle incorporation. Carbohydrate polymers, 109, 118-125.
CAPTCHA Image