با همکاری انجمن علوم و صنایع غذایی ایران

نوع مقاله : مقاله پژوهشی

نویسندگان

1 گروه علوم و صنایع غذایی، دانشکده علوم کشاورزی، دانشگاه گیلان.

2 مرکز تحقیقات کشاورزی و منابع طبیعی خراسان رضوی

3 گروه فرآوری مواد غذایی، پژوهشکده علوم و صنایع غذایی، مشهد.

4 گروه تغذیه، دانشکده پزشکی، دانشگاه علوم پزشکی مشهد.

5 عضو هیئت علمی دانشگاه گیلان

چکیده

خواص مکانیکی خمیر نقش مهمی در صنایع پخت ایفا می‌کنند و در مواردی از قبیل تثبیت افزودنی‌ها و مطالعه تاثیر آنها بر سایر خواص خمیر و نان می‌توانند مورد توجه واقع شوند. در این پژوهش، از روش‌های چندمتغیره متقارن (تعیین ضرایب همبستگی و آنالیز مولفه‌های اصلی) و نامتقارن (سطح پاسخ و رگرسیون حداقل مربعات جزئی) به‌منظور مطالعه تاثیر اجزاء ژل بهبوددهنده بر خواص مکانیکی خمیر نان بربری، ارتباط خواص مکانیکی خمیر با سایر خواص خمیر و نان و نیز بهینه‌سازی فرمول ژل استفاده گردید. نمونه‌های ژل بهبوددهنده، محتوی 0 تا g100/g 5/0 سدیم استئاروئیل لاکتیلات، داتم و پروپیلن گلیکول بودند. نتایج نشان داد که با توجه به تغییر مقدار و نوع اجزاء فرمولاسیون ژل، دامنه وسیعی از تغییرات در خواص مکانیکی خمیر ایجاد می‌شود و از اختلاط g100/g 5/0 سدیم استئاروئیل لاکتیلات، g100/g 5/0 داتم و g100/g 5/0 پروپیلن گلیکول بهترین حالت حاصل می‌گردد. ضرایب همبستگی بین خواص مکانیکی خمیر با خصوصیات فارینوگرافی خمیر، کیفیت، جنبه‌های حسی، پردازش تصویر و ماندگاری نان بررسی گردید. همچنین آنالیز مولفه‌های اصلی ثابت نمود که قادر به استخراج اطلاعات مناسبی است و می‌تواند به‌عنوان یک روش آسان برای تحلیل و تفسیر خواص مکانیکی خمیر و ارتباط آنها با سایر خواص خمیر و نان مورد استفاده قرار گیرد. مدل‌های رگرسیونی حداقل مربعات جزئی نیز برای تعیین ارتباط بین خصوصیات مکانیکی خمیر با خصوصیات فارینوگرافی خمیر، خصوصیات کیفی، حسی، پردازش تصویر و ماندگاری نان به‌کار برده شد. نتایج حاصل از آنالیزهای آماری نشان داد که خصوصیات مکانیکی خمیر، قادر به پیشگویی حداقل 50% از خصوصیات خمیر و نان هستند.

کلیدواژه‌ها

عنوان مقاله [English]

Use of dough mechanical properties in the prediction rheology of dough, quality, sensory, shelf life and microstructure of bread: investigation by asymmetric and symmetric multivariate methods

نویسندگان [English]

  • Amir Pourfarzad 1
  • Mahdi Karimi 2
  • Zahra Ahmadian 3
  • Sudiyeh Hejri-Zarifi 4
  • Siamak Gheibi 5

1 Department of Food Science and Technology, Faculty of Agricultural Sciences, University of Guilan, Rasht, Iran.

2 Khorasan Razavi Agricultural and Natural Resources Research Center, Mashhad, Iran.

3 Department of Food Processing, Research Institute of Food Science and Technology (RIFST), Mashhad, Iran.

4 Department of Nutrition, School of Medicine, Mashhad University of Medical Sciences, Iran.

5 faculty member

چکیده [English]

Introduction: Flat breads are the main dietary staple in many Middle Eastern and North African countries. In today’s demanding world, the use of bread improvers has become an indispensable part of enhancing the quality of bakery products. Bread improvers are technically sophisticated blends of functional ingredients, which if formulated correctly, will enhance the development of dough structure, facilitate trouble-free production, and provide the desired result of consistent products having optimal quality at the lowest possible cost. Among the functional food additives, polyols have been increasingly used to improve the quality and shelf life of bread. Polyols have been used successfully to extend the shelf life of ready to eat bread used by the military, Barbari bread fortified with soy flour, as well as flour tortillas. Emulsifiers, a subset of surfactants, have been widely used by the baking industry. The function of surfactants, as crumb softening agents, is closely related to their interaction or complex formation with starch, particularly the linear amylose fraction, to retard bread staling. Surfactants, such as SSL and DATEM that are the most efficient in breadmaking are able to form lamellar mesophases or gel structures in water. It has been shown that for polar lipids the lamellar liquid-crystalline phase is the most effective form in which this component can be added to bread dough in order to improve loaf volume. Mechanical properties of dough play an important role in baking industries. In a few cases, it can be desirable, for example, to fix some ingredients on bakery products. The dough is expected not to stick to metal surfaces and to show a good resistance to vibration and mechanical shock to minimize detrimental effects such as process breakdown, production loss and contamination of the equipment. Thus, the present study was designed: (a) to examine the effects of different emulsifiers (sodium stearoyl-2-lactylate and diacetyl tartaric acid esters of monoglycerides) and polyol (propylene glycol) on Barbari flat bread performance when used singly and in combination at different levels; (b) to obtain the relationship between mechanical and rheological properties of dough and quality, shelf life, sensory and image parameters of bread using the asymmetric methods (response surface methodology and partial least squares regression) and symmetric methods (coefficients of determination and Principal components analysis) and (c) to determine the optimum formulations for Barbari flat bread improver.

Materials and methods: Commercial Triticum aestivum wheat flour (locally named Setareh) was procured from the AceeArd Co., Khorasan, Iran. Propylene glycol (PG) was purchased from J.T. Baker Chemical Company (Phillipsburg, NJ). Sodium stearoyl-2-lactylate (SSL) and diacetyl tartaric acid esters of monoglycerides (DATEMs) were provided by Vista Tejarat Company (Tehran, Iran). Moisture, ash, fat, protein, wet gluten and falling number were determined according to standard AACC methods. Three replications were taken for each characteristic. Gel samples were prepared using sodium stearoyl-2-lactylate (SSL), diacetyl tartaric acid esters of monoglyceride (DATEM) and propylene glycol (PG) in the range of 0-0.5 g/100g. Bread making was carried out according to the method of Maleki et al. (1981). Quality analysis of fresh bread samples was carried out by measuring specific volume. Sensory attributes of bread were selected according to the Iranian flat bread evaluation method, including bread form and shape; upper surface property; bottom surface property; cavity and porosity; firmness and softness of texture; chewiness; odor, flavor and taste and overall quality score. Staling phenomenon and its changes were evaluated by penetration test after 1 hour, 3, 5 and 7 days. The average values of L*, a*and b* colors describing the outer crust regions were obtained. The crumb grain features were the mean cell area, porosity, and cell density. A central composite design was constructed using the software Design Expert Version and was used for sampling of different combination of gel constituents. In addition, Lack of fit, coefficients of determination (R2), adj-R2, coefficient of variation (CV) and significant probabilities were calculated to check the model adequacy. Multivariate correlation matrix, coefficients of determination and principal components analysis were performed by using Minitab 15 software.

Results and Discussion: The characteristics of the flour are in the range of typical values of medium strong flour, suitable for Iranian Barbari flat bread. The results showed dough adhesiveness was increased by SSL addition but it was decreased by quadratic effect of SSL like as resilience. All of three components to the gel formula caused decrement in the hardness, gumminess and chewiness. But the interaction of them influenced on them. On the other hand, although cohesiveness increased by addition of all components but influenced significantly by interaction of them. Dough mechanical properties were furthermore correlated with dough farinographic aspects, quality, sensory parameters, image processing and shelf life of bread. It was proved that principal components analysis (PCA) is able to extract relevant information and offer an easy and promising approach for the interpretation of dough mechanical properties and its correlation with other properties and dough and bread. Partial least squares regression (PLSR) models were applied to determine the relationships between dough mechanical properties and dough farinographic properties, bread quality, sensory, image processing and shelf life aspects. Results from statistical analysis suggest that the mechanical parameters of dough are capable in predicting more than 50% of dough and bread properties

کلیدواژه‌ها [English]

  • Central composite design
  • Coefficients of determination
  • Principal component analysis
  • Partial least squares regression
  • Texture analysis of dough
AACC (2000). Approved Methods of the American Association of Cereal Chemists. vol. Vol. 2. . St. Paul, MN: American Association of Cereal Chemists.
Angioloni, A., & Collar, C. (2011). Physicochemical and nutritional properties of reduced-caloric density high-fibre breads. LWT-Food Science and Technology, 44(3), 747-758.
Armero, E., & Collar, C. (1997). Texture properties of formulated wheat doughs Relationships with dough and bread technological quality. Zeitschrift für Lebensmitteluntersuchung und-Forschung A, 204(2), 136-145.
Azizi, M., & Rao, G. (2005). Effect of storage of surfactant gels on the bread making quality of wheat flour. Food Chemistry, 89(1), 133-138.
Barcenas, M. E., & Rosell, C. M. (2006). Different approaches for improving the quality and extending the shelf life of the partially baked bread: low temperatures and HPMC addition. Journal of Food Engineering, 72(1), 92-99.
Dhaliwal, A., & MacRitchie, F. (1990a). Contributions of protein fractions to dough handling properties of wheat-rye translocation cultivars. Journal of Cereal Science, 12(2), 113-122.
Dhaliwal, A., Mares, D., & Marshall, D. (1990b). Measurement of dough surface stickiness associated with the 1B/1R chromosome translocation in bread wheats. Journal of Cereal Science, 12(2), 165-175.
Dijksterhuis, G. (1994). Procrustes analysis in studying sensory-instrumental relations. Food quality and preference, 5(1), 115-120.
Dreese, P., Faubion, J., & Hoseney, R. (1988). Dynamic rheological properties of flour, gluten, and gluten-starch doughs. I. Temperature-dependent changes during heating. Cereal chemistry, 65(4), 348-353.
Farrera-Rebollo, R. R., de la Paz Salgado-Cruz, M., Chanona-Perez, J., Gutierrez-Lopez, G. F., Alamilla-Beltran, L., & Calderon-Dominguez, G. (2012). Evaluation of image analysis tools for characterization of sweet bread crumb structure. Food and Bioprocess Technology, 5(2), 474-484.
Gliemmo, M. F., Campos, C. A., & Gerschenson, L. N. (2006). Effect of several humectants and potassium sorbate on the growth of Zygosaccharomyces bailii in model aqueous systems resembling low sugar products. Journal of Food Engineering, 77(4), 761-770.
Gonzales-Barron, U., & Butler, F. (2006). A comparison of seven thresholding techniques with the k-means clustering algorithm for measurement of bread-crumb features by digital image analysis. Journal of Food Engineering, 74(2), 268-278.
Heddleson, S., Hamann, D., & Lineback, D. (1993). The Dahlquist criterion: applicability of a rheological criterion to the loss of pressure-sensitive tack in flour-water dough. Cereal chemistry.
Howard, N. (1972). role of some essential ingredients in the formation of layer cake structures. Bakers digest.
Kamel, B., & Ponte Jr, J. (1993). Emulsifiers in baking. Advances in baking technology (pp. 179-222): Springer.
Knightly, W. H. (1981). Shortening Systems: Fats, Oils, and Surface-Active Agents—Present and Future1. Cereal chemistry, 58(3), 171-174.
Krog, N. (1981). Theoretical aspects of surfactants in relation to their use in breadmaking. Cereal chemistry, 58(3), 158-164.
Krog, N. J., & Sparso, F. V. (1997). Food emulsifiers and their chemical and physical properties. In: S. Friberg, & K. Larsson, Food Emulsions: Marcel Dekker Inc.: New York.
Lombard, G., Weinert, I., Minnaar, A., & Taylor, J. (2000). Preservation of South African steamed bread using hurdle technology. LWT-Food Science and Technology, 33(2), 138-143.
Maleki, M., Vetter, J. L., & Hoover, W. J. (1981). The effect of emulsifiers, sugar, shortening and soya flour on the staling of barbari flat bread. Journal of the Science of Food and Agriculture, 32(12), 1209-1212.
Martens, H., & Martens, M. (2001). Analysis of two data tables X and Y: Partial Least Squares Regression (PLSR). Multivariate Analysis of Quality: An Introduction (pp. 111-125). London, UK: J. Wiley & Sons Ltd.
Martin, D., & Stewart, B. (1991). Contrasting dough surface properties of selected wheats. Cereal foods world, 36(6), 502–504.
Navickis, L., Anderson, R., Bagley, E. B., & Jasberg, B. (1982). Viscoelastic properties of wheat flour doughs: Variation of dynamic moduli with water and protein content. Journal of Texture Studies, 13(2), 249-264.
Potgieter, J. (1992). Emulsifiers for bakery. Food Review, 18, 23-23.
Pourfarzad, A., Khodaparast, M. H. H., Karimi, M., Mortazavi, S. A., Davoodi, M. G., Sourki, A. H., & Razavizadegan Jahromi, S. H. (2011). Effect of polyols on shelf-life and quality of flat bread fortified with soy flour. Journal of Food Process Engineering, 34(5), 1435-1448.
Pourfarzad, A., Haddad Khodaparast, M., Karimi, M., & Mortazavi, S. (2011). Use of response surface methodology for investigation the effect of gel improver components on the stickiness of Barbari bread dough. Journal of Food Research, 21(2), 257-268.
Pourfarzad, A., Mohebbi, M., & Mazaheri-Tehrani, M. (2012). Interrelationship between image, dough and Barbari bread characteristics; use of image analysis to predict rheology, quality and shelf life. International journal of food science & technology, 47(7), 1354-1360.
Pourfarzad, A., Haddad Khodaparast, M. H., Karimi, M., & Mortazavi, S. A. (2013). Study on the Effect of Gel Improver Components on Properties of Barbari Bread Fortified with Soy Flour Using Image Processing Techniques. Iranian Food Science and Technology Research Journal, 9(4), 285-294.
Rajabzadeh, N. (1991). Iranian Flat Breads Evaluation. Tehran, Iran: Iranian Cereal and Bread Research Institute.
Ram, B. P., & Nigam, S. N. (1983). Texturometer as a tool for studying varietal differences in wheat flour doughs and gluten proteins. Journal of Texture Studies, 14(3), 245-249.
Rosell, C. M., Rojas, J. A., & de Barber, C. B. (2001). Combined effect of different antistaling agents on the pasting properties of wheat flour. European Food Research and Technology, 212(4), 473-476.
Sai Manohar, R., & Haridas Rao, P. (2002). Interrelationship between rheological characteristics of dough and quality of biscuits; use of elastic recovery of dough to predict biscuit quality. Food Research International, 35(9), 807-813.
Silva, R. (2000). Uses of alpha-crystalline emulsifiers in the sweet goods industry. Cereal foods world, 45(9), 405-411.
Suhendro, E., Waniska, R., Rooney, L., & Gomez, M. (1995). Effects of polyols on the processing and qualities of wheat tortillas. Cereal chemistry, 72(1), 122-127.
Zghal, M., Scanlon, M., & Sapirstein, H. (2002). Cellular structure of bread crumb and its influence on mechanical properties. Journal of Cereal Science, 36(2), 167-176.
CAPTCHA Image