نوع مقاله : مقاله پژوهشی

نویسندگان

دانشگاه فردوسی مشهد

چکیده

فیلم زیست‌تخریب‌پذیر ترکیبی با استفاده از پلی‌وینیل الکل- صمغ قدومه شیرازی با نسبت 60 به 40 با افزودن شش غلظت مختلف گلیسرول (%70-20) به روش قالب‌گیری ساخته شد. ویژگی‌های فیلم شامل ضخامت، دانسیته، میزان رطوبت، جذب رطوبت، حلالیت در آب، زاویه تماس قطره آب، رنگ، نرخ عبور بخار آب و خواص مکانیکی آن‌ها مورداندازه‌گیری قرار گرفت. درضمن از آزمون‌های طیف‌سنج مادون‌قرمز و میکروسکوپ الکترونی نیز برای بررسی برهم‌کنش‌های شیمیایی و ویژگی‌های ریزساختار فیلم‌ها استفاده شد. افزایش غلظت گلیسرول به‌طور معنی‌داری (05/0 >P) باعث افزایش ضخامت، میزان رطوبت، جذب رطوبت، حلالیت در آب، دانسیته، شفافیت، کاهش زاویه تماس، نفوذپذیری به بخار آب و کدورت گردید. افزایش غلظت گلیسرول بر پارامترهای رنگ نیز اثر گذاشت، به‌طوری‌که میزان روشنایی و زردی فیلم را به‌ترتیب از 90 به 4/94 و از 5/0 به 3/1 افزایش و میزان قرمزی را از 9/0 به 5/0 کاهش داد. به‌طورکلی فاکتورهای رنگی شامل اندیس سفیدی، اندیس زردی و میزان اشباعیت رنگ افزایش و اختلاف رنگ نمونه‎ها با پلیت سفید کاهش یافت. آزمون مکانیکی فیلم‌ها نشان داد که مقاومت کششی از 6/64 به 2/13 و مدول یانگ نیز از 892 به 85/156 مگاپاسکال کاهش و درصد کشیدگی از 1/2 به 47/15 درصد افزایش یافت. افزایش غلظت گلیسرول، نفوذپذیری به بخار آب را تا بیش از 7/4 برابر افزایش داد. با افزایش غلظت گلیسرول تغییر اندکی در ساختار فیلم‌ها مشاهده شد. فیلم‌ها با نسبت بالاتر گلیسرول تصاویر ریزساختار با سطوح یکنواخت و بدون منفذی را نشان دادند.

کلیدواژه‌ها

Abdollahi, M., Alboofetileh, M., Rezaei, M., & Behrooz, R, (2013). Comparing physico-mechanical and thermal properties of alginate nanocomposite films reinforced with organic and/or inorganic nanofillers. Food Hydrocolloids, 32(2), 416-424.
Abugoch, L. E., Tapia, C., Villaman, M. C., Yazdani-Pedram, M., & Diaz-Dosque, M, (2011). Characterization of quinoa protein–chitosan blend edible films. Food Hydrocolloids, 25(5), 879-886.
Ahmadi, R., Kalbasi-Ashtari, A., Oromiehie, A., Yarmand, M.-S., & Jahandideh, F, (2012). Development and characterization of a novel biodegradable edible film obtained from psyllium seed (Plantago ovata Forsk). Journal of Food Engineering, 109(4), 745-751.
Angles, M. N., & Dufresne, A, (2000). Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis. Macromolecules, 33(22), 8344-8353.
Antoniou, J., Liu, F., Majeed, H., Qazi, H. J., & Zhong, F, (2014). Physicochemical and thermomechanical characterization of tara gum edible films: effect of polyols as plasticizers. Carbohydrate polymers, 111, 359-365.
Arismendi, C., Chillo, S., Conte, A., Del Nobile, M. A., Flores, S., & Gerschenson, L. N, (2013). Optimization of physical properties of xanthan gum/tapioca starch edible matrices containing potassium sorbate and evaluation of its antimicrobial effectiveness. LWT-Food Science and Technology, 53(1), 290-296.
ASTM, Designation E96-00, (2000). Standard method for water Vapor transmission of materials. In Annual Book of ASTM Standards. American Society for Testing and Materials.
ASTM, Designation D882-02, (2002). Standard method for Tensile Properties of Thin Plastic Sheeting. In Annual Book of ASTM Standards. American Society for Testing and Materials.
da Silva, M. A., Bierhalz, A. C. K., & Kieckbusch, T. G, (2009). Alginate and pectin composite films crosslinked with Ca 2+ ions: effect of the plasticizer concentration. Carbohydrate polymers, 77(4), 736-742.
Ebrahimi, S. E., Koocheki, A., Milani, E., & Mohebbi, M, (2015). Interactions between Lepidium perfoliatum seed gum–grass pea (Lathyrus sativus) protein isolate in composite biodegradable film. Food Hydrocolloids.
Fabra, M., Talens, P., & Chiralt, A, (2010). Water sorption isotherms and phase transitions of sodium caseinate–lipid films as affected by lipid interactions. Food Hydrocolloids, 24(4), 384-391.
Garcia, M. A., Pinotti, A., & Zaritzky, N. E, (2006). Physicochemical, water vapor barrier and mechanical properties of corn starch and chitosan composite films. Starch‐Stärke, 58(9), 453-463.
Gennadios, A., Weller, C., Hanna, M., & Froning, G, (1996). Mechanical and barrier properties of egg albumen films. Journal of food science, 61(3), 585-589.
Ghanbarzadeh, B., Almasi, H., & Entezami, A. A, (2010). Physical properties of edible modified starch/carboxymethyl cellulose films. Innovative food science & emerging technologies, 11(4), 697-702.
Ghasemlou, M., Khodaiyan, F., & Oromiehie, A, (2011). Physical, mechanical, barrier, and thermal properties of polyol-plasticized biodegradable edible film made from kefiran. Carbohydrate polymers, 84(1), 477-483.
Gontard, N., & Guilbert, S, (1994). Bio-packaging: technology and properties of edible and/or biodegradable material of agricultural origin Food packaging and preservation (pp. 159-181): Springer.
Gontard, N., Guilbert, S., & Cuq, J. L, (1993). Water and glycerol as plasticizers affect mechanical and water vapor barrier properties of an edible wheat gluten film. Journal of food science, 58(1), 206-211.
Gupta, B., Agarwal, R., & Sarwar Alam, M. S. (2013). Preparation and characteri-zation of polyvinyl alcohol–polyethylene oxide–carboxymethyl cellulose blendmembranes. Journal of Applied Polymer Science, 127(2), 1301–1308.
Han, J. H., & Floros, J. D, (1997). Casting antimicrobial packaging films and measuring their physical properties and antimicrobial activity. Journal of Plastic Film and Sheeting, 13(4), 287-298.
Haq, M. A., Hasnain, A., & Azam, M, (2014). Characterization of edible gum cordia film: Effects of plasticizers. LWT-Food Science and Technology. 55(1), 163-169.
Hesarinejad, M. A., Razavi, S. M., & Koocheki, A, (2015). Alyssum homolocarpum seed gum: Dilute solution and some physicochemical properties. International journal of biological macromolecules, 81, 418-426.
Jia, D., Fang, Y., & Yao, k, (2009). Water vapor barrier and mechanical properties of konjac glucomannan–chitosan–soy protein isolate edible films. Food and bioproducts processing, 87(1), 7-10.
Jost, V., Kobsik, K., Schmid, M., & Noller, K, (2014). Influence of plasticiser on the barrier, mechanical and grease resistance properties of alginate cast films. Carbohydrate polymers, 110, 309-319.
Jouki, M., Khazaei, N., Ghasemlou, M., & HadiNezhad, M, (2013a). Effect of glycerol concentration on edible film production from cress seed carbohydrate gum. Carbohydrate polymers, 96(1), 39-46.
Jouki, M., Yazdi, F. T., Mortazavi, S. A., & Koocheki, A, (2013b). Physical, barrier and antioxidant properties of a novel plasticized edible film from quince seed mucilage. International journal of biological macromolecules, 62, 500-507.
Kanatt, S. R., Rao, M., Chawla, S., & Sharma, A, (2012). Active chitosan–polyvinyl alcohol films with natural extracts. Food Hydrocolloids, 29(2), 290-297.
Khazaei, N., Esmaiili, M., Djomeh, Z. E., Ghasemlou, M., & Jouki, M, (2014). Characterization of new biodegradable edible film made from basil seed (Ocimum basilicum L.) gum. Carbohydrate polymers, 102, 199-206.
Koocheki, A., Mortazavi, S. A., Shahidi, F., Razavi, S., Kadkhodaee, R., & Milani, J. M, (2010). Optimization of mucilage extraction from Qodume shirazi seed (Alyssum homolocarpum) using response surface methodology. Journal of Food Process Engineering, 33(5), 861-882.
Koocheki, A., Shahidi, F., Mortazavi, S.A., Karimi, M., & Milani, E. (2011). Effect of QodumeShirazi (Alyssum Homolocarpum) seed and xanthan gum on rheological properties of wheat flour dough and quality of bread.Iranian Food Science and Technology Research Journal. 7(1): 9-16.
Kowalczyk, D., & Baraniak, B, (2011). Effects of plasticizers, pH and heating of film-forming solution on the properties of pea protein isolate films. Journal of Food Engineering, 105(2), 295-305.
Kurt, A., & Kahyaoglu, T. (2014), Characterization of a new biodegradable edible film made from salep glucomannan. Carbohydrate polymers, 104, 50-58.
Li, Y., Jiang, Y., Liu, F., Ren, F., Zhao, G., & Leng, X, (2011). Fabrication and characterization of TiO 2/whey protein isolate nanocomposite film. Food Hydrocolloids, 25(5), 1098-1104.
Mali, S., Sakanaka, L., Yamashita, F., & Grossmann, M, (2005). Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effect. Carbohydrate polymers, 60(3), 283-289.
Marsh, K., & Bugusu, B, (2007). Food packaging—roles, materials, and environmental issues. Journal of food science, 72(3), R39-R55.
Martins, J. T., Cerqueira, M. A., Bourbon, A. I., Pinheiro, A. C., Souza, B. W., & Vicente, A. A, (2012). Synergistic effects between κ-carrageenan and locust bean gum on physicochemical properties of edible films made thereof. Food Hydrocolloids, 29(2), 280-289.
Mchugh, T. H., Aujard, J. F., & Krochta, J, (1994). Plasticized whey protein edible films: water vapor permeability properties. Journal of food science, 59(2), 416-419.
Motedayen, A. A., Khodaiyan, F., & Salehi, E. A. (2013). Development and characterisation of composite films made of kefiran and starch. Food chemistry, 136(3), 1231-1238.
Mu, C., Guo, J., Li, X., Lin, W., & Li, D, (2012). Preparation and properties of dialdehyde carboxymethyl cellulose crosslinked gelatin edible films. Food Hydrocolloids, 27(1), 22-29.
Müller, C. M., Yamashita, F., & Laurindo, J. B, (2008). Evaluation of the effects of glycerol and sorbitol concentration and water activity on the water barrier properties of cassava starch films through a solubility approach. Carbohydrate polymers, 72(1), 82-87.
Muñoz, L., Aguilera, J., Rodriguez-Turienzo, L., Cobos, A., & Diaz, O, (2012). Characterization and microstructure of films made from mucilage of Salvia hispanica and whey protein concentrate. Journal of Food Engineering, 111(3), 511-518.
Nkwachukwu, O. I., Chima, H. C., Ikenna, A. O., & Albert, L. (2013). Focus on potential environmental issues on plastic world towards a sustainable plastic recycling in developing countries. International Journal of Industrial Chemistry, 4, 1-34.
Piermaria, J., Bosch, A., Pinotti, A., Yantorno, O., Garcia, M. A., & Abraham, A. G, (2011). Kefiran films plasticized with sugars and polyols: water vapor barrier and mechanical properties in relation to their microstructure analyzed by ATR/FT-IR spectroscopy. Food Hydrocolloids, 25(5), 1261-126.
Piermaria, J. A., Pinotti, A., Garcia, M. A., & Abraham, A. G, (2009). Films based on kefiran, an exopolysaccharide obtained from kefir grain: Development and characterization. Food Hydrocolloids, 23(3), 684-690.
Ramos, Ó. L., Reinas, I., Silva, S. I., Fernandes, J. C., Cerqueira, M. A., Pereira, R. N., & Malcata, F. X, (2013). Effect of whey protein purity and glycerol content upon physical properties of edible films manufactured therefrom. Food Hydrocolloids, 30(1), 110-122.
Razavi, S. M. A., Amini, A. M., & Zahedi, Y. (2015). Characterisation of a new biodegradable edible film based on sage seed gum: Influence of plasticiser type and concentration. Food Hydrocolloids, 43, 290-298.
Rezaee Taghiabadi, M., Maftoonazad, N., Badiee, F., & Hosseini, SA. A. (2013). Evaluation of factors affecting mechanical properties, opacity and water vapor permeability of edible films based on gum tragacanth by using RSM method. Journal of Food Science, 9 (37), 123 to 134.
Saurabh, C. K., Gupta, S., Bahadur, J., Mazumder, S., Variyar, P. S., & Sharma, A, (2013). Radiation dose dependent change in physiochemical, mechanical and barrier properties of guar gum based films. Carbohydrate polymers, 98(2), 1610-1617.
Seyedi, S., Koocheki, A., Mohebbi, M., & Zahedi, Y, (2014). Lepidium perfoliatum seed gum: A new source of carbohydrate to make a biodegradable film. Carbohydrate polymers, 101, 349-358.
Shen, Z., Ghasemlu, M., & Kamdem, D. P. (2015). Development and compatibility assessment of new composite film based on sugar beet pulp and polyvinyl alcohol intended for packaging applications. Journal of applied polymer science,132, 41354.
Silva, F. E. F., Batista, K. A., Di-Medeiros, M. C. B., Silva, C. N. S., Moreira, R. B., & Fernandes, K. F. (2016). A stimuli-responsive and bioactive film based on blended polyvinyl alcohol and cashew gum polysaccharide. Materials Science and Engineering, 58, 927–934.
Sothornvit, R., & Krochta, J, (2005). Plasticizers in edible films and coatings. Innovations in food packaging, 403-433.
Sothornvit, R., & Krochta, J. M, (2001). Plasticizer effect on mechanical properties of β-lactoglobulin films. Journal of Food Engineering, 50(3), 149-155.
Souza, B. W., Cerqueira, M. A., Teixeira, J. A., & Vicente, A. A, (2010). The use of electric fields for edible coatings and films development and production: a review. Food Engineering Reviews, 2(4), 244-255.
Srinivasa, P., Ramesh, M., Kumar, K., & Tharanathan, R, (2003). Properties and sorption studies of chitosan–polyvinyl alcohol blend films. Carbohydrate polymers, 53(4), 431-438.
Su, J.-F., Huang, Z., Yuan, X.-Y., Wang, X.-Y., & Li, M, (2010). Structure and properties of carboxymethyl cellulose/soy protein isolate blend edible films crosslinked by Maillard reactions. Carbohydrate polymers, 79(1), 145-153.
Sun, Q., Sun, C., & Xiong, L, (2013). Mechanical, barrier and morphological properties of pea starch and peanut protein isolate blend films. Carbohydrate polymers, 98(1), 630-637.
Suyatma, N. E., Tighzert, L., Copinet, A., & Coma, V, (2005). Effects of hydrophilic plasticizers on mechanical, thermal, and surface properties of chitosan films. Journal of Agricultural and Food Chemistry, 53(10), 3950-3957.
Synytsya, A., Čopı́kova, J., Matějka, P., & Machovič, V, (2003). Fourier transform Raman and infrared spectroscopy of pectins. Carbohydrate polymers, 54(1), 97-106.
Thakhiew, W., Devahastin, S., & Soponronnarit, S, (2010). Effects of drying methods and plasticizer concentration on some physical and mechanical properties of edible chitosan films. Journal of Food Engineering, 99(2), 216-224.
Tian, H., Xu, G., Yang, B., & Guo, G, (2011). Microstructure and mechanical properties of soy protein/agar blend films: Effect of composition and processing methods. Journal of Food Engineering, 107(1), 21-26.
Wilhelm, H.-M., Sierakowski, M.-R., Souza, G., & Wypych, F. (2003). Starch films reinforced with mineral clay. Carbohydrate polymers, 52(2), 101-110.
Yang, S. Y., & Huang, C. Y. (2008). Plasma treatment for enhancing mechanical andthermal properties of biodegradable PVA/starch blends. Journal of Applied Poly-mer Science, 109(4), 2452–2459.
Yuen, S.-N., Choi, S.-M., Phillips, D. L., & Ma, C.-Y. (2009). Raman and FTIR spectroscopic study of carboxymethylated non-starch polysaccharides. Food chemistry, 114(3), 1091-1098.
Zhou, J., Wang, S., & Gunasekaran, S, (2009). Preparation and characterization of whey protein film incorporated with TiO2 nanoparticles. Journal of food science, 74(7), N50-N56
CAPTCHA Image