Food Technology
Samira Farizad; Hajar Abbasi
Abstract
Introduction
Hydrocolloid is a term refers to all polysaccharides extracted from plants, seeds, and microbial sources that regardless of their biological and nutritional role has various functional properties in food products such as concentration and gel production of aqueous solutions, stabilization ...
Read More
Introduction
Hydrocolloid is a term refers to all polysaccharides extracted from plants, seeds, and microbial sources that regardless of their biological and nutritional role has various functional properties in food products such as concentration and gel production of aqueous solutions, stabilization of foam, emulsions and dispersed systems, prevention of ice and sugar crystals, control of the release of flavor compounds and consequently control and improve food quality. Ultrasound has been widely used in the food industry due to its numerous physical and chemical effects. The effect of ultrasound is due to cavitation, heating, dynamic mobility and shear stresses to the sample. Today, ultrasound is used as a green new technology with unique effects on food storage and processing. One of the newest applications of ultrasound is altering the structure of polymers such as polysaccharides. Changes in the structure of hydrocolloids lead to modification in their functional properties.
Materials and Methods
In this study, effect of ultrasonic waves, time (0-90 min) and processing temperature (25-75 °C) on physicochemical, rheological and functional properties of locust bean gum was investigated. In this regards, different parameters including changes in pH, solubility, minimum gelatinization concentration, viscosity and emulsifying properties (Emulsifying capacity, emulsion stability and particle dimensions) of treated locust bean gum were determined. Response surface methodology in central composite design was used to evaluate the effect of independent variables on qualitative properties of locust bean gum and model their changes. The best treatment condition was determined and the optimum treated samples were evaluated and compared in microstructure using scanning electron microscopy, rheological properties (rotational and oscillatory test) and Fourier transform infra-red.
Results and Discussion
The results showed that with increasing the time of ultrasound treatment, pH, and viscosity of the hydrocolloid decreased and its solubility and minimum gel concentration increased. However, with increasing temperature, pH, minimum gelatinization concentration and hydrocolloid viscosity increased and its solubility decreased. Optimization of treatment conditions was performed by considering the achievement of the best hydrocolloid performance characteristics. Two different temperature and time conditions were proposed for the desirable treatment of the hydrocolloid using ultrasound. In the first case, the selection criteria were to achieve the best solubility and emulsifying properties of the hydrocolloid, and in the second case, the selection criteria were solubility and emulsifying properties improvement while maintaining the gelatinization properties of the hydrocolloid. Based on the desired quality factors, optimization was performed and the results showed that in the first optimal sample (treated at 40 ° C and 48.9 minutes), solubility and emulsifying properties and in the second optimal sample (treated at 66.67 ° C and 15 Min) by maintaining the gelation properties of hydrocolloid, the solubility of the hydrocolloid increased significantly. The performance of treated samples validated developed models. SEM results showed that the ultrasound increased three-dimensional structure of gum. The smaller microscopic structure was observed in untreated sample and the larger one was in treated with ultrasonic waves for 40.9 minutes at 40 ° C. Therefore, ultrasound caused agglomeration of treated freeze dried gum. It is noteworthy that several holes observed in the structure of treated gum with ultrasonic, which can increase solubility of the gum. The flow behavior of the sonicated and control samples showed that the viscosity of all samples decreased with increasing shear rate, which indicates their pseudoplastic behavior. At low shear rates (about 0.01 per second), the viscosity of the control sample was higher than that of the sonicated samples. However, at high shear rates (about 40 per second), viscosity of the three samples were almost the same. Therefore, the control sample was more affective to shear rate compared to the treated samples. The modulus of elasticity (G ') and viscosity (G' ') of the treated specimens were lower compared to the control. Also, the frequency sweep of samples shown that in the frequency range under study, G 'and G'' were frequency dependent and with increasing frequency, the amount of these two parameters increased. This observation indicates the influence of rheological properties of the samples on the frequency changes that are commonly observed in suspensions. At low frequencies, the predominance of viscous behavior over elastic was observed in all three control and ultrasonic samples (G ''> G ') and this feature was higher in the treated samples than the control. The modulus of elasticity and viscosity of the treated sample for 49 minutes was lower than other treated samples for 15 minutes, which shows the effect of ultrasound on the rheological properties of the hydrocolloid.
Conclusion
The results of this study showed that ultrasonic waves provide a good opportunity to change the physical and functional properties of carob seed gum. It is possible to significantly improve the solubility and emulsifying activity of this hydrocolloid using ultrasound. It is necessary to determine the treatment conditions of the sample according to the intended application.
Food Technology
Somayeh Ghandehari alavijeh; Mehran Alami; Yahya Maghsoudlou; Alireza Sadeghi Mahoonak
Abstract
Introduction: Porous starch granules are becoming of great interest such as non-toxic absorbents, owing to their great absorption capacity derived from the major specific surface area. Pores can protect sensitive elements as oils, minerals, vitamins, bioactive lipids, food pigments such as beta-carotene ...
Read More
Introduction: Porous starch granules are becoming of great interest such as non-toxic absorbents, owing to their great absorption capacity derived from the major specific surface area. Pores can protect sensitive elements as oils, minerals, vitamins, bioactive lipids, food pigments such as beta-carotene and lycopene that are sensitive to light, oxidation or high temperature. Alpha-amylases from Bacillus and glucoamylases from Aspergillus niger have the strongest hydrolytic ability toward starch. Ultrasonic treatments have been reported to produce modified starch. In the last years, the effects of sonication on the starch microstructures and properties have been studied. It was shown that the C–C bonds of starch granules were destroyed, and hollows or pores were formed on the surface and inside the granules. Therefore, the main objective of this study was to identify a suitable starch (corn or wheat) to carry and protect iron ions. The enzyme having a fixed concentration of 0.1% within a fixed period of 36 hour, was added to the starch solutions in three different steps - after, simultaneously and before - the ultrasound processes. The power of the ultrasound was 350 watt for 10 minutes. Iron ions (Iron Ammonium Sulfate (II)) were added to the porous corn and wheat starches in concentrations of 40, 60 and 80 ppm. Materials and methods: The ability of water and oil adsorptions were measured in the produced corn and wheat porous starches. The microstructures of porous starches were revealed by using Scanning Electron microscopy (SEM). After adding iron ammonium sulfate (II) to the porous starches of corn and wheat, the amount of iron ions absorbed and the type of bonds formed between starch and iron ions were determined by inductively coupled plasma (ICP) and infrared spectroscopy (FTIR), respectively. Statistical analysis was performed by using SPSS software and the mean comparison test at 5% probability level and in the form of factorial test. Results & Discussion: The hydration capacity in processed wheat starch was lower than corn starch due to the differences in granular structure of wheat and corn starch. The hydration capacity in native wheat and corn starches was significantly (p < 0.05) lower than the processed forms. No significant difference (P>0.05) was observed between the three steps of adding enzyme (e after, simultaneously and before the ultrasound processes). According to the results, the oil adsorption capacity in the processed starches was more than that of the native forms. Scanning Electron Microscopy (SEM) shows that the native corn and wheat starch granules appeared without any clear of fissures, fractures and pores. The corn and wheat starches which were treated by the enzyme after (step 1), simultaneously (step 2) and before (step 3) the ultrasound change and lose their smooth surfaces and become uneven. The surface of corn granules in group 2 and 3 have less pores and porosities with more laminated. In simultaneously processes (phase 2) the ultrasound causes the enzyme to be inactivated. In phase 1, it can be concluded that the ultrasound helps the enzyme performance in creating the porosities and cavities. The wheat granules in step 1, 2 and 3 have a lot of damage on the surface and it is likely that the surface of the wheat granule is more resistant to enzyme penetration than the corn. The results of the ICP test show that processed corn starch has significantly (P <0.05) greater ability to absorb iron ions than processed wheat starch. Also, corn starch had a significant difference in iron uptake in the step 1 than steps 2 and 3 (P <0.05), but the data of the second and third steps did not differ significantly (P> 0.05). Hydroxyl groups of D-glucose units in starch granules bond with iron ions and FTIR spectrums give drop at 575 (cm-1) wavelengths. This study showed that enzymatic treatment and ultrasound led to the native corn starches convert to porous starches. The corn starch is more suitable than the wheat because the wheat is more resistant and the cavities were rarely formed. The corn porous starch is a suitable carrier for iron ions.
Mahsa Alikhani Faradonbeh; Reza Esmaeilzadeh kenari; Maryam Ghaderi
Abstract
Introduction: The peel of fruits, in particular, are an abundant source of natural compounds and contain the higher amount of phenolics compared to the edible portions. Ultrasound-assisted extraction (UAE) is an ideal extraction method capable of producing high quantities of bioactive compounds with ...
Read More
Introduction: The peel of fruits, in particular, are an abundant source of natural compounds and contain the higher amount of phenolics compared to the edible portions. Ultrasound-assisted extraction (UAE) is an ideal extraction method capable of producing high quantities of bioactive compounds with a shorter extraction time. Probe and bath systems are the two most common ways of applying ultrasound waves to the sample. Probe sonicators are constantly in contact with the sample and make reproducibility and repeatability difficult. In addition, the risk of sample contamination and foam production is higher. Bath sonicators can act on a range of samples simultaneously and allow for higher reproducibility. Kiwifruit belongs to family Actinidiaceae and genus Actinidia. Kiwifruit is characterized by a high content of vitamin C and other useful compounds such as vitamin E, flavonoids, and minerals. Phenolic compounds present in Kiwifruit peel are catechin, epicatechin, chlorogenic acid, caffeic acid, coumaric acid, and rutin. Several studies have been done on the extraction of various plants with ultrasonic waves. Most of the research on the extraction of plant extracts by ultrasound-assisted under various conditions of parentage such as time, solvent, temperature, and intensity of the sound obtained matched with other traditional methods of extraction and different studies have shown that there was never study on the effects of ultrasound bath and probes under the same conditions (temperature, solvent, time and frequency) on obtained extract and comparison of both two methods has been done. The aim of this study was comparing the antioxidant activity of Kiwifruit peel extract (KPE) obtained by two extraction methods ultrasound bath and probe techniques in same conditions temperature, solvent, time and frequency. Materials and Methods: Hayward Kiwifruit variety was purchased from gardens in Tonekabon City. The peels were dried in the shadow at 25-27˚C, and then they were finely ground in a laboratory grinder. The dried peels were pulverized and sieved through a 40-mesh sieve to obtain the powdered samples. The dry plant material was then packed in the plastic bag and stored in a freezer at -18˚ C. 10 g of Kiwifruit peel powder was extracted with 100 mL of a mixture of ethanol–water 80% (v/v) at two methods Ultrasound Bath Extraction by using a 25 kHz ultrasonic system (model Elma Sonic S30H, Germany), temperature (45°C), time (20 min) and Ultrasound Probe Extraction by using a 25 kHz ultrasonic system (model VCX 250, Sonics & Materials, Inc., USA), temperature (45°C), time (20 min), amplitude of 45% with a probe of 1 cm in diameter was used. After obtaining extracts, an efficiency of extraction, total phenolic and flavonoid compounds, scavenging activity of 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical, and ferric reducing antioxidant power (FRAP) assay were measured and concentration of 0.1 mg/ml of synthetic antioxidant TBHQ was as the control sample. All data were reported as mean ± standard deviation of three replicates. The results were compared by analysis of variance (ANOVA) using SPSS for Windows [version 16]. Mean differences were significant for extraction efficiency, total phenolic and flavonoid compounds based on T-test (binary comparison) and other tests based on Duncan's test at 0.05. Charts were drawn with Microsoft Excel version 2016. Discussion & Results: These results showed that the highest amount of phenolic compounds, flavonoids, extraction efficiency, and antioxidant activity were obtained in UPAE-KP. In both extraction methods, with increasing KPE concentration, DPPH free radicals scavenging and ferric reducing antioxidant power also increased. The concentration of 2 mg/ml UPAE-KP extracted the highest percentage of inhibition (94.11%) in all of the concentrations of the extracts in two methods. UPAE-KP at concentrations of 1.5 and 2 mg/ml and UBAE-KP at a concentration of 2 mg/ml showed better performance in scavenging free radicals than TBHQ. Among the extracts, IC50 UPAE-KP was 0.2±0.06 mg/ml which was significantly different from UBAE-KP (P<0.05). TBHQ at a concentration of 0.1 mg/ml (with a percentage of inhibition of 88.04±0.5) showed a better radical inhibitory activity than the low concentrations of Kiwifruit Peel extracts. UPAE-KP with a lower IC50 (0.09±0.07) showed more reducing antioxidant power than UBAE-KP. TBHQ at a concentration of 0.1 mg/ml (with an absorption rate of 304/1) had greater reducing antioxidant power than the Kiwifruit Peel extracts at all concentrations except the concentration of 2 mg/ml UPAE-KP. In this study, the extraction of KPE with both ultrasound methods was acceptable in terms of efficiency and antioxidant activity, with the difference that the probe superior to the ultrasound bath. Therefore, according to the results, KPE was competitive with TBHQ activity. KPE can be used as a useful source to provide natural antioxidant, and the probe compared with the ultrasound bath is a better way of extracting the KPE phenolic compounds.
Mohammad Ganjeh; Seyed Mahdi Jafari; Mehrdad Niakosari; Ali-Mohammad Tamaddon; Yahya Maghsoudlou
Abstract
Introduction: In recent years, production of nutraceuticals by adding bioactive compounds and nutrients has been grown substantially. These compounds are generally sensitive to environmental or gastrointestinal conditions and their bioavailability is limited due to destructive reactions. One of the common ...
Read More
Introduction: In recent years, production of nutraceuticals by adding bioactive compounds and nutrients has been grown substantially. These compounds are generally sensitive to environmental or gastrointestinal conditions and their bioavailability is limited due to destructive reactions. One of the common methods to reduce or prevent these kind of problems, is microencapsulation of valuable compounds in some materials which can protect them against environmental conditions, and enabling them to controlled release from trapped compounds at specific time and place. Orange peel oil, contains some important bioactive compounds such as limonene that is used in a variety of beverages, foods, cosmetics, pharmaceuticals and chemicals. D-limonene is the main constituent of orange peel oil, because it makes an 80-95% fraction of the orange peel oil volatile compounds, depending on fruit variety. In addition to its technological characteristics (flavor), D limonene can stop or delay the initiation of cancer. It can also be used as a safe alternative to antimicrobial compounds. Nevertheless, technological limitations (hydrophobic structure, high reactivity, sensitivity to oxidation and volatility) often avoid suitable use of this compound as a dietary supplement. Polysaccharides are among of the basic materials which are applied more in this field. Several factors such as cheap and easy access, having active groups interacting with hydrophobic and hydrophilic compounds, biodegradation, biocompatibility and relatively high thermal resistance, have turned them to be superior to lipid and protein carriers. One of the most important polysaccharide compounds existing in nature, is starch. It can be used as a carrier in encapsulation processes with different purposes, having advantages such as inexpensive, non-toxic, capable of recrystallization, the ability to form film and complex and resistant to various degrees of enzymatic hydrolysis. Spatial configuration of amylose is changed in the presence of ligands such as iodine and linear alcohols, resulting in a left-handed helix which can trap ligands within or between curvatures derived from glucose connections. One of the major structures which is created in the interaction of amylose and lipophilic substances, is known as V-amylose structure. V-amylose is a left-handed helix with an inner hole which ligands can be placed within it. The aim of this study was to determine the effectiveness of amylose in nanoencapsulation of limonene as a bioactive compound with desirable sensory characteristics using a thermo-mechanical stress.
Materials and methods: Based on the analysis of pure limonene samples (Sigma-Aldrich) as well as samples used in this study, more than 92% of examined sample comprised of D-limonene. In order to prepare amylose nanoparticles containing limonene, 0.1 molar solution of potassium hydroxide (Merck, Germany) was prepared in deionized water and then high amylose corn starch (HACS) (Sigma-Aldrich (St. Louis, MO, USA) with 70% amylose was added to it in the ratios of 2: 4% while stirring continuously for 30 minutes at 80°C. Limonene was then used in the ratios of 5: 10% of HACS was added to the suspension and stirring continued for 1 minute. Initial suspension has been processed by using ultrasound system (Model UP100- Hescheler Company, Germany) with 100 W power and frequency of 30 kHz for 9 and 18 minutes. The viscosity of amylose suspensions containing nanoparticles with different formulations was measured by using a capillary viscometer (Schott-Gerate-Capillary-Viscometer-525-00- Germany). Size and zeta potential was measured by using dynamic light scattering (DLS) and Nanotrac Flex In-situ Particle Size Analyzer devices and Microtrac ZETA-check determined. The morphology of nanoparticles was studied using a scanning electron microscopy (TESCAN-Vega3- Czech Republic). Microencapsulation efficiency and loading efficiency were determined by using spectrophotometry.
Results and Discussion: In all formulations, particle sizewere less than 50 nm. Starch granules were exposed to cavitation stress by applying the ultrasonic process .The constant formation of bubbles creates a mechanical impact with high energy on starch granules during bursting. Fast impingement of fluid to granule surfaces, hitting particles to each other as well as resistant of the granules against fluid stream cause breaking of starch particles into nanoparticle scales. The highest amount of zeta potential was related to the sample which had the highest starch and limonene concentration. Amylose concentration had the main effect on zeta potential changes. Electrostatic charges can be the main reasons for the higher zeta potential in samples with 4% amylose concentration. More increasing in surface active agents of amylose, namely ionized hydroxyl groups of glucose molecules leads to increasing in surface charge, and results in zeta potential. The most impact on solutions viscosity is related to amylose concentration. Generally, increasing the amylose concentration leads to increasing the solution viscosity, in other side, with ultrasound treatment, the amount of this index was reduced and the solution became more fluent. Microencapsulation and loading efficiency values ranged between 28-82% and 0.38-1.63% respectively. The limonene concentration had the most impact on the efficiency in various formulations. At similar treatments with %4 amylose concentration and 9 min sonication period, by increasing the amount of limonene from %5 to 10, microencapsulation and loading efficiency were increased from %31 to %82 (%62 growth) and from 0.52 to 1.41 (%63 growth) respectively.
Atefeh Farahmand; Mehdi Varidi; Arash Koocheki
Abstract
Introduction: Exploiting natural substances with dual or multiple functionalities is getting more attention in food industry due to the requirement from the health- conscious consumers and the trends for sustainable environment. Hydrocolloids are high molecular weight macromolecules that can be easily ...
Read More
Introduction: Exploiting natural substances with dual or multiple functionalities is getting more attention in food industry due to the requirement from the health- conscious consumers and the trends for sustainable environment. Hydrocolloids are high molecular weight macromolecules that can be easily dissolved and dispersed in water under appropriate conditions. They can modulate rheological properties of foods, and are generally used as food thickeners, texture modifier, stabilizers and emulsifiers for various applications. Mucilage is a high molecular weight polyuronides consisting of sugar and uronic acid units. It is partially soluble in water and can form highly viscous solution. It exhibits hampering effect on the diffusion of glucose, help to postpone the absorption and digestion of carbohydrates. The mucilage extracted from the seeds of the quince fruit contained cellulose micro-fibrils strongly associated whit a glucuronoxylan possessing a very high proportion of glucuronic acid residues. Analysis of quince seed mucilage (QSM) has shown the presence of more cellulosic fraction and hydrolysable polysaccharide.Quince seed mucilage is one of the endemic hydrocolloids, which due to high viscosity, its extraction needs a method to reduce the extraction time, energy consumption and especially raise the extraction efficiency. The traditional extraction method of polysaccharide from plant tissues are maceration, mechanical rabbling and heat reflux. Theses extraction methods depend largely on energy input and agitation to improve the solubility and mass transfer efficiency of polysaccharides. Usually, the convention extraction method requires long extraction time and high extraction temperature with low extraction yield, but high energy consumption. Ultrasound in combination with conventional extraction is a potential technique, which is a fully reproducible food process, completed in shorter time with high reproducibility, reduced processing cost, simplified manipulation and work-up. To achieve this goal, in this study ultrasound- assisted extraction (UAE) as a novel extraction method was used.Materials andMethods:Quince seed used in this study was purchased from a local market (KhorasanRazavi, Mashhad). They were cleaned manually by removing the foreign matter such as stones, dirt and broken seeds. They were packed in hermetic plastic vessels and stored at 5ºC until further use. For mucilage extraction, first conventional extraction was optimized to select the best hydration conditions and after that UAE (24 KHz probe and 400 W power) was performed at three different levels of intensity (20, 60 and 100%) and times (5, 15 and 30 min).All chemicals used were analytical grades. Yield value of hydrocolloid was calculated by dividing the weight of dried hydrocolloid by the weight of initial dry seeds. Emulsion heat stability was determines by the method described in previous studies. In order to measuring the water absorption capacity (WAC), 0.05 g of mucilage was added to deionized water until QSM was completely wet (~ 10ml). The tubes were then centrifuged at 1600×g for 10 min. Excess water was discarded and residue was weighted. Apparent viscosity of QSM solution with 0.1% (w/v) concentration was measured using a rotational viscometer (Brookfield, DV- ІІІ, USA). Shear rate increased linearly from 2.5 - 35 s-1 at 25˚C.For measuring the foam stability and emulsion heat stability, the mucilage dispersions were prepared at 0.25 and 0.5 (w/v) respectively, and kept overnight at 4˚C. After complete hydration, 2% (w/v) egg white powder was added and then foamed by whipping at 8600 rpm for 2 min using adisperser.Results and Discussion: Optimized conditions of conventional extraction were 45 min, 47˚C and 32.5: 1 water to seed ratio. The results showed that extraction at 30 min with 100% intensity raised the extraction yield to 42.7% in comparison with control sample.Improvement in hydrocolloid extraction by ultrasound is attributed to ultrasound pressure wave diffusion which results in cavitation phenomenon.Amplitude level and exposure time had a significant (p
Akram Arianfar; Fakhri Shahidi; Rassoul Kadkhodaee; Mehdi Varidi
Abstract
Introduction: Tea (Camellia sinensis), is the most widely beverage after water across the world. The most important chemical composition in tea is phenolic compounds (catechins) that have antioxidant and anticarcinogenic properties and are benefited for cardiovascular disease. There are two major kinds ...
Read More
Introduction: Tea (Camellia sinensis), is the most widely beverage after water across the world. The most important chemical composition in tea is phenolic compounds (catechins) that have antioxidant and anticarcinogenic properties and are benefited for cardiovascular disease. There are two major kinds of tea, black tea and green tea. Green Tea, is originated in China and dates back to several thousand years ago. In the production of green tea, young leaves are rolled and oxidized to decreasing oxidation but in production of black tea, tea leaves are oxidized (fermented) for 90-120 min after rolling and then catechins are converted to complexe compounds (theaflavins and thearubigins). The conventional method for extraction of green tea polyphenols compounds are heating, boiling, cold and heathing refluxe extraction, with long extraction periods and low extraction efficiency. In this study 3 techniques for extraction of polyphenol compounds from Green tea leaves were investigated and compored together.The main objective of this study was to determine the effects of differrent extraction conditions, temperature ( 40, 60, 80 and 100° C), different time ( 15, 30, 45 and 60 min ), microwave power (300, 600 and 900 % ) and ultrasound amplitude (40, 60, 80 and 100 W) on Green tea polyphenol content and antioxidant activity in three methods including Heat Reflux Extraction(HRE), Microwave Assisted Extraction(MAE) and Ultasound Assisted Extraction(UAE).Materials and Methods: Dried green tea leaves (supplied from Lahijan (Iran))were grinded for increasing the contact surface area between the solvent and solute. 1 g of green tea was extracted with 100 mL of water at various methods, Heathing Reflux Extraction(HRE), Microwave Assisted Extraction(MAE), by microsynth laboratory system (Milestone-ACT-36-Rev01) at 50 Hz and output 2450 MHz with adjustable power output (100-1000 W), temperature 180° C and Ultrasound Assisted Extraction (UAE) in double jacket vessel by using a 25 kHz ultrasonic system (model VCX 750, Sonics & Materials, Inc., USA), at a maximum nominal power output of 750W. All measurements were carried out in triplicate. The results were analysed statistically using the minitab 16 Program to determine the average value and standard error. Variance analysis, with a significant level of α= 0.05% was performed to determine the effect of time, temperature, microwave power and ultrasound amplitude on polyphenols content and antioxidant activity. Total phenol were determined spectrophotometerically by Folin-Ciocalteu method at 765 nm )Hewlett- Packard spectrophotometer model 8452A, Rockville). The antioxidant activity evaluated with the DPPH test spectrophotometrically at 517 nm. Results and Discussion: These results showed that polyphenol content is increased with increasing the time, temperature, ultrasound amplitude and microwave power of extraction. By increasing temperature to 80°C , time to 45 min, ultrasound amplitude from 40 to 80 and microwave power from 300 to 600, polyphenol content and antioxidant activity was increased and after that was constant. These results showed that, H.R.E require long extraction time and have low efficiency. Polyphenol compounds are thermally unstable and maybe degredate in thermal processing. Also, the best method for extraction was MAE, because of higher yield, higher contents of pol-yphenol and shortend time and this method was very efficient in the extraction of polyphenl compounds. The efficiency of extraction by UAE method is higher than HRE and lower than MAE method. Conclusion: UAE method compared to HRE method is enhanced the extraction of polyphenol, facilating solvent peneteration and increase the product releasing from intracellular. This method agitated the solvent to material and increased the contact surface between material and solven, and peneteration of solvent in to the green tea leaves. UAE canbe carried out at a lower temperature than HRE and decreased thermal damage.
Roksaneh Rouhani; Soudabeh Einafshar; Reihaneh Ahmadzadeh Ghavidel
Abstract
Sepals and petals are byproducts from saffron production process that waste without any use in Iran. These byproducts containing a lot of anthocyanin and natural antioxidants.The aim of this study is determine efficiency of extraction and measurement of antioxidant activity and anthocyanin pigments of ...
Read More
Sepals and petals are byproducts from saffron production process that waste without any use in Iran. These byproducts containing a lot of anthocyanin and natural antioxidants.The aim of this study is determine efficiency of extraction and measurement of antioxidant activity and anthocyanin pigments of pollen and anther of saffron flower ,using mixed solvent of ethanol and hydrochloridic acid 1.5 N (85:15) by ultrasonic waves. Therefore, the time factors (5, 15, 25 minutes) and sound intensity (20, 60 and 100%) were usedThe results showed that the most efficient extraction of samples (54/48%) was extracted in 15 minute and 100% of sound intensity, and the maximum measure of anthocyanin compounds (48.83 mg/ml), total phenolic compounds (36.54 mg/ml), power of reviving the anti-radical DPPH activity of the extracts (335.7 mg/ml) and the power of scavenging Fe III (431.1µmol/lit Fe III), the best sample in all of the exams was extracted in 10 minutes and 100% of sound intensity. So, the optimized situation for extraction of anthocyanin compounds by ultrasound waves was time 15 min and 100% about sound intensity.
Elahe Eshraghi; Mahdi Kashani-Nejad; Yahya Maghsoudlou; Shahram Beiraghi-Toosi; Mehran Alami
Abstract
The aim of this research was to use Osmosis-Ultrasound Compound pre-treatment and studying the time of drying and the potentiality to rehydration in dried samples of kiwi fruit (Hayvard variety). The samples were drained in three timed phases, 10, 20 and 30 minutes in room temperature in 30, 50 and 70 ...
Read More
The aim of this research was to use Osmosis-Ultrasound Compound pre-treatment and studying the time of drying and the potentiality to rehydration in dried samples of kiwi fruit (Hayvard variety). The samples were drained in three timed phases, 10, 20 and 30 minutes in room temperature in 30, 50 and 70 BX in Ultrasound bath osmosis solutions. The results of drying time showed that by decreasing the concentration of kiwi fruits samples from 8 to 6 mm and increasing the concentration of osmosis solution and ultrasound time, the time of gaining 20% moisture decreased for each treatment. The studies showed that the minimum time for getting 20% moisture in 6 and 8 mm kiwi fruits in pre-treated samples with 70 BX and 30 minutes ultrasound time is 263 and 313 minutes respectively. The results of rehydration in pre-treated compound samples showed that by increasing the concentration of osmosis solution, as well as the time for Ultrasound waving and increasing the kiwi fruits samples concentration from 6 to 8 mm, the rehydration decreased compared to control sample. The results of perceptive assessment in general acceptance of dried kiwi fruit showed that using pre-treated compound sample was more acceptable than the control sample.
Mahboubeh Ostadzadeh; Soleiman Abbasi; Mohammad Reza Ehsani
Abstract
Despite the potential of high intensity ultrasound treatment on homogenization of milk and dairy based products, this treatment, under certain conditions, may lead to produce off-odors which can influence its applicability in the food industry. Therefore, in this research, cacao flavored milk (chocolate ...
Read More
Despite the potential of high intensity ultrasound treatment on homogenization of milk and dairy based products, this treatment, under certain conditions, may lead to produce off-odors which can influence its applicability in the food industry. Therefore, in this research, cacao flavored milk (chocolate milk) was treated using ultrasound at various levels of power intensity, exposure time, and treatment temperature. A light microscope equipped by high resolution digital camera was used to evaluate the size distribution of cocoa particles. Finally, the color, flow and viscosity, and sensory characteristics of stabilized samples were determined. According to the findings, increase of power intensity and exposure time led to a significant increase on the degree of homogenization, and subsequently a paramount decrease on the size of cocoa particles. The cocoa particle diameters of chocolate milk which sonicated at 65 ºC were significantly smaller than the other temperatures. Moreover, the stabilized samples showed Newtonian behavior where the viscosity of control was lower than those treated by ultrasonic. With increase of ultrasound power intensity and exposure time, the viscosity of treated samples decreased. In terms of color, the sonicated samples showed higher L* values and the increase of power intensity and exposure time led to a significant increase on L* value. These samples gained lower sensorial scores than control mostly due to their ‘rubbery’ aroma. But, overall acceptance of treated samples had no significant difference against control. The ultrasound is an effective, rapid, and novel technique which can reduce the size of cocoa particles in order to produce stabilized chocolate milk where its color, sensory and rheological properties was very similar to one treated by conventional heat treatment. These findings can open new approaches in terms of its applicability in dairy industry.