Sara Forouzandeh; Mohammad Fazel
Abstract
[1]Introduction: Nowadays, various methods have been developed to transfer and improve the absorption of lipophilic compounds in food in the form of coating. Colloidal emulsion-based systems are widely used in commercial systems. Chia seed oil is an oil rich in unsaturated fatty acids, especially omega ...
Read More
[1]Introduction: Nowadays, various methods have been developed to transfer and improve the absorption of lipophilic compounds in food in the form of coating. Colloidal emulsion-based systems are widely used in commercial systems. Chia seed oil is an oil rich in unsaturated fatty acids, especially omega 3 and omega 6, which can be used as the oily phase of nanoemulsions. The aim of this study was to investigate the fatty acid composition of chia seed oil and the effect of oil to water ratio and emulsifier on the properties of nanoemulsions of this oil. Materials and Methods: Clean chia seeds were purchased as a pack from Zistfa Company and all other chemicals were purchased from Marack, Pars Shimi and Dr. Majelli companies. By using the oil set machine, the seeds were treated by cold pressing method and oil extraction efficiency was calculated .Gas chromatography (GC) was used to identify and measure the fatty acid composition of chia seed oil. In this study, nanoemulsions were produced in three levels of oil to water (20%, 35% and 50%) and in three levels of oil emulsifier (5%, 10% and 15%).To produce nanoemulsions, the aforementioned ratios were first calculated and determined .Then, Weigh the tweens 20 and 80 with chia seed oil and water and mix the emulsifiers with the chia seed oil on the stirrer. Then a mixture of 20 and 80 tweens and oil was added dropwise to the weighed distilled water. The mixture was stirred gently by a magnet. After this step, the mixture is placed in the refrigerator to reduce its temperature. After this time, it was placed in an ice bucket and placed in an ultrasonic homogenizer for 9 minutes at a power of 300 watts to form nanoemulsions. Then, the properties of nanoemulsions including particle size and distribution, coating efficiency and antioxidant properties were evaluated. Vasco model DLS (Dynamic light scattering) was used for the particle size. The particle size of nanoemulsions was determined by this device using dynamic light diffraction method. DPPH method was used to measure the antioxidant activity of oils and nanoemulsions and the antioxidant activity was calculated by using the formula. To evaluate the efficiency of coating of nanoemulsions, the amount of surface oil and total oil was measured and the efficiency was calculated by using the formula. The release rate of nanoemulsions was evaluated for 7 weeks. The tests were performed in three replications. Experimental data were analyzed in a completely randomized design with factorial test and Duncan test was used to compare the mean data. Software (Excel, 2010) was used to draw the graphs Results and Discussion: According to the results obtained in this study, it can be said that chia seed oil contains a high percentage of unsaturated fatty acids and has a very high level of antioxidant properties (88.43%), which has antioxidant properties in the structure of nanoemulsions. Oil is better preserved in water. Other results showed that with increasing oil content of nanoemulsions, particle size, antioxidant properties and release increased and the coating efficiency decreased. Also, by increasing the ratio of emulsifier to oil in nanoemulsions, the coating efficiency and antioxidant properties increase and the particle size and release decreases. In the results obtained from these tests, the minimum particle size was 14.08 nm and the highest coating efficiency was 96.40%. The antioxidant activity of the samples was evaluated in the range of 5.61% to 21.43%. Also, the average release of samples at the end of 7 weeks of the study reached nearly 18%. During storage, the treatments were quite stable for five months, which could be due to the low particle size and low release of samples. Considering the mentioned advantages, using nanoemulsions of this oil is a suitable option for enriching beverages.
Fatemeh Saadat; Seyed Hadi Razavi; Houshang Alizadeh
Abstract
Introduction: Oil plants store energy in the form of neutral lipids in the organelles called oil bodies. These organelles save triacylglycerol until seed germination. In recent years, the oil bodies have been considered as an oil/water emulsion in the pharmaceutical, food, and cosmetic industries. These ...
Read More
Introduction: Oil plants store energy in the form of neutral lipids in the organelles called oil bodies. These organelles save triacylglycerol until seed germination. In recent years, the oil bodies have been considered as an oil/water emulsion in the pharmaceutical, food, and cosmetic industries. These organelles are also effective tool for purifying, stabilizing and delivery of biotechnology products. Aqueous extraction processing (AEP) is the most common method for oil body extraction. Despite all advantages compared to organic solvent extraction, the yield of AEP still needs to be optimized. Therefore, this study surveys the efficacy of two solvents, phosphate buffer and distilled water in the oil bodies' extraction from rapeseed. Materials and methods: Brassica napus L. seeds were obtained from seed and plant improvement institute, Iran. To compare the efficacy of solvents, 0.1 M phosphate buffer (pH 7.5) and distilled water were used for extraction. The ground rapeseed was suspended in the buffers in a ratio of 1:10 (w/v) and stirred for 12 hours at room temperature. This step was repeated three times. Then, the extract was centrifuged at 10,000 g for 15 minutes at 4 ° C. The floating layer was carefully removed and dissolved again in the initial solvent and the pH was adjusted to 8.5 to precipitate the deflated proteins. Finally, the cream layer was retrieved using centrifuges and one-tenth of the initial buffer volume was applied to the 9 M urea buffer (pH 7.5) for 10 minutes to separate non-specific proteins from oil bodies. The purified oil-bodies were monitored under light microscopy. Results and discussion: According to the microscopic and macroscopic results, the stability of oil particles and efficiency of extraction would be higher by phosphate buffer due to maintaining a constant alkaline pH during the extraction. Moreover, the presence of different salts in the phosphate buffer increases the purification yield up to twice times as a result of providing osmotic pressure and increasing solubility of membrane proteins. These results emphasize the importance of membrane proteins on the formation and stabilization of oil bodies.
Hoda Khalesi; Mohammad Alizadeh khaled abad; Mahmoud Rezazadehbari
Abstract
Zedo gum is a polysaccharide that exudates from Amygdalus scoparia Spach tree. In this study the apparent viscosity under the influence of the gum concentration (0.5%, 0.75%, 1%, 2%, 3%, 4% and 5% w/v), temperature (20, 45, and 70 ˚C), pH (2, 5 and 8) and salt concentration (0-0.5 M) has been investigated. ...
Read More
Zedo gum is a polysaccharide that exudates from Amygdalus scoparia Spach tree. In this study the apparent viscosity under the influence of the gum concentration (0.5%, 0.75%, 1%, 2%, 3%, 4% and 5% w/v), temperature (20, 45, and 70 ˚C), pH (2, 5 and 8) and salt concentration (0-0.5 M) has been investigated. Zedo gum is composed of soluble and insoluble components that respectively have the properties of solubility and swelling in water. The apparent viscosity changed due to temperature and pH. The highest viscosity was obtained at pH of 7.2 and 24 ˚C. Viscosity was changed by addition of certain strong electrolytes. The emulsion capacity and stability of oil in water emulsion increased by increasing gum concentration. Thermal behavior of Zedo gum with different moisture content was studied by differential scanning calorimetry (DSC). Thermal profiles showed an endothermic event. Considering the results obtained, Zedo gum is a potential natural and domestic additive for industry as a thickening agent, emulsifier and stabilizer.
