Modeling the Ultrasonic Atomization Process of Milk and Powder Production Using Spray Drying Method

Document Type : Full Research Paper

Authors

• Ali Heydari
• Masoud Goharimanesh
• Mohammadreza Gharib
• Ali Koochi

Department of Mechanical Engineering, University of Torbat Heydarieh, Torbat Heydarieh, Iran

https://doi.org/10.22067/ifstrj.2022.75615.1154

Abstract

Introduction
The beneficial use of ultrasonic systems has been proven in many applications. Among them, ultrasonic atomization is widely used in various industries, including food and coating industries. Ultrasonic vibrations of liquids can produce fine droplets called atomized fluid. During the fluid atomization process, droplet size and distribution can be precisely controlled so that the droplets become very small and high-level particle distribution is achieved which can be easily evaporated. This method is widely used in various industries, including food industry (for the production of driedpowder products) and coating industry. The key factor that affects droplet size is the frequency and amplitude of the ultrasonic vibrations and the properties of the fluid, including the fluid viscosity and surface tension.
Materials and Methods
Based on a review of literature, it is clear that the modeling of the ultrasonic method for spray dryers and the production of milk powder has not been done so far. In the present work, first, the research background is reviewed and then, using the relationships provided for the ultrasonic atomization of different fluids in the reviewed articles, the effect of ultrasonic vibrations on the atomization and evaporation of milk as a food and the powder production was studied using spray drying process. Then the effects of various oscillation parameters such as frequency, amplitude and also the temperature of the fluid, which affects its viscosity, density and surface tension, on the rate of atomization of the fluid was investigated. In the present work, we first examine the fluid whose range of properties is true in relations. One of the most widely used liquids in the food industry is milk. By examining the viscosity, surface tension and density of the milk and obtaining the dimensionless numbers We, In and Oh, it is determined that the provided relations can also be used for milk. After calculating the diameter of the evaporated particles of milk due to ultrasonic vibrations as well as the evaporation rate, the independent variables of the research can be changed. First, in the constant physical properties of a fluid, we change the frequency and amplitude of ultrasonic oscillations and studied their effect on the produced particle diameter and evaporation rate. In the next step, with the constant frequency and amplitude of ultrasonic oscillations, the effect of changes in fluid properties (temperature change) on the produced particle diameter and evaporation rate was investigated. In the next stepthe effect of frequency and amplitude of ultrasonic fluctuations as well as changes in fluid properties (temperature change) on the powder diameter produced and the time required for the drying process was investigated. The analysis of all data obtained from the above steps was performed using Mathlab software.
Results and Discussion
The main and summary results obtained from the present study are as follows:

As the amplitude of the vibrations and the temperature of the milk increased, the drying time required for the evaporation of droplets decreased, but the powder diameter and the evaporation rate increased.
As the frequency of vibrations increased, the drying time required for the evaporation of droplets increased, but the powder diameter and the evaporation rate decreased.
The results showed that quadrupling the amplitude of the vibrations reduces the time required for the droplets to dry by 14.4% and increases the evaporation rate by 62.6%. At a constant temperature of the gas dryer and the milk, changing the frequency from 10 to 40 kHz results in 21.4% increase in the time required for the droplets to dry. Also, with increasing the temperature of the milk from 15 to 30°C, at a constant frequency and amplitude of vibrations, the time required for drying the droplets decreases by 12.4% and the diameter of the particles produced increases by 11.3%.

Conclusion
In this research, the process of ultrasonic assisted evaporation of whole milk and drying and production of milk powder has been modeled mathematically and thermodynamically. The calculation code was written using Mathlab software and after making sure that the solution conditions are in the desired range of equations, the results were presented. In the present work, the effect of the frequency and amplitude of ultrasonic vibrations as well as the initial temperature of milk on the diameter of the evaporated particles, the evaporation rate, the diameter of the powder produced and the time required for the evaporated droplets to dry by ultrasonic method was investigated.

Keywords

• Atomization
• Oscillation amplitude
• Oscillation frequency
• Spray drying
• Ultrasonic

Main Subjects

• Food Engineering

References

1. Arun, B.S., Mariappan, V., & Maisotsenko, V. (2020). Experimental study on combined low temperature regeneration of liquid desiccant and evaporative cooling by ultrasonic atomization, International Journal of Refrigeration 112: 100-09. https://doi.org/10.1016/j.ijrefrig.2019.11.023.
2. Bakshi, A.S., & Smith, D.E. (1984). Effect of fat content and temperature on viscosity in relation to pumping requirements of fluid milk products, Journal of Dairy Science 67(6): 1157-1160. https://doi.org/10.3168/jds.S0022-0302(84)81417-4.
3. Berlin, E., & Pallansch, M.J. (1963). Influence of drying methods on density and porosity of milk powder granules, Journal of Dairy Science 46(8): 780-784. https://doi.org/10.3168/jds.S0022-0302(63)89148-1.
4. Briceño-Gutierrez, D., Salinas-Barrera, V., Vargas-Hernández, Y., Gaete-Garretón, L., & Zanelli-Iglesias, C. (2015). On the ultrasonic atomization of liquids, Physics Procedia 63: 37-41. https://doi.org/10.1016/j.phpro.2015.03.006.
5. Broniarz-Press, L., Sosnowski, T.R., Matuszak, M., Ochowiak, M., & Jabłczyńska, K. (2015). The effect of shear and extensional viscosities on atomization of Newtonian and non-Newtonian fluids in ultrasonic inhaler, International Journal of Pharmaceutics 485: 41-49. https://doi.org/10.1016/j.ijpharm.2015.02.065.
6. Candia-Muñoz, N., Ramirez-Bunster, M., Vargas-Hernández, Y., & Gaete-Garretón, L. (2015). Ultrasonic spray drying vs high vacuum and microwaves technology for blueberries, Physics Procedia 70: 867-71. https://doi.org/10.1016/j.phpro.2015.08.178.
7. D’Addio, S.M., John G.C., Chi Lip Kwok Ph., Robert, K., Prud, H., & Hak-Kim, C. 2012. Constant size, variable density aerosol particles by ultrasonic spray freeze drying, International Journal of Pharmaceutics 427: 185-91. https://doi.org/10.1016/j.ijpharm.2012.01.048.
8. Deepu, P., Chang P., & Moghaddam, S. (2018). Dynamics of ultrasonic atomization of droplets, Experimental Thermal and Fluid Science 92: 243-47. https://doi.org/10.1016/j.expthermflusci.2017.11.021.
9. Faraday, M. (1831). On the forms and states assumed by fluids in contact with vibrating elastic surfaces, Trans. R. Soc. London 52: 319–340.
10. Grasmeijer, N. (2019). Identifying critical process steps to protein stability during spray drying using a vibrating mesh or a two-fluid nozzle, European Journal of Pharmaceutical Sciences 128: 152-157. https://doi.org/10.1016/j.ejps.2018.11.027.
11. Koumei, H., Takenaka, N., Nanzai, B., Okitsu, K., Bandow, H., & Maeda, Y. (2009). Influence of adding salt on ultrasonic atomization in an ethanol–water solution, Ultrasonics Sonochemistry 16: 150-54. https://doi.org/10.1016/j.ultsonch.2008.07.002.
12. Isleroglu, H., Turker, I., Tokatli, M., & Koc, B. (2018). Ultrasonic spray-freeze drying of partially purified microbial transglutaminase, Food and Bioproducts Processing 111: 153-64. https://doi.org/10.1016/j.fbp.2018.08.003.
13. Kim, H., Jaegeun, L., & You-Yeon, W. (2015). A simple derivation of the critical condition for the ultrasonic atomization of polymer solutions, Ultrasonics 61: 20-24. https://doi.org/10.1016/j.ultras.2015.04.007.
14. Kirpalani, D.M., & Suzuki, K. (2011). Ethanol enrichment from ethanol–water mixtures using high frequency ultrasonic atomization, Ultrasonics Sonochemistry 18: 1012-17. https://doi.org/10.1016/j.ultsonch.2010.05.013.
15. Kudo, T., Kazuhiko, S., Sankoda, K., Norikazu, N., & Nii, S. (2017). Effect of ultrasonic frequency on size distributions of nanosized mist generated by ultrasonic atomization, Ultrasonics Sonochemistry 37: 16-22. https://doi.org/10.1016/j.ultsonch.2016.12.019.
16. Lang, R.J. (1962). Ultrasonic atomization of liquids, Journal Acoust. Soc. Am. 34: 6–8.
17. Lebedev, E., Gordienko, M., Troyankin, A., & Menshutina, N. (2017). CFD Simulation of spray drying with ultrasonic dispersion in Antonio Espuña, Moisès Graells and Luis Puigjaner (eds.), Computer Aided Chemical Engineering (Elsevier). https://doi.org/10.1016/B978-0-444-63965-3.50006-4.
18. Li, W., Pan, Y., Yao, Y., & Dong, M., (2018). Modeling and parametric study of the ultrasonic atomization regeneration of desiccant solution, International Journal of Heat and Mass Transfer 127: 687-702. https://doi.org/10.1016/j.ijheatmasstransfer.2018.07.001.
19. Lisboa, H., Duarte, M.E., & Cavalcanti-Mata, M.E. (2018). Modeling of food drying processes in industrial spray dryers, Food and Bioproducts Processing 107: 49-60. https://doi.org/10.1016/j.fbp.2017.09.006.
20. Naidu, H., Kahraman, O., & Feng, H. (2022). Novel applications of ultrasonic atomization in the manufacturing of fine chemicals, pharmaceuticals, and medical devices, Ultrasonics Sonochemistry 86: 105984. https://doi.org/10.1016/j.ultsonch.2022.105984.
21. Peskin, R.L., & Raco, R.J. (1963). Ultrasonic atomization of liquids, Journal Acoust. Soc. Am. 35: 1378–1381.
22. Rajan, R., & Pandit, A.B. (2001). Correlations to predict droplet size in ultrasonic atomization, Ultrasonics 39: 235–255. https://doi.org/10.1016/S0041-624X(01)00054-3.
23. Ramisetty, K.A., Pandit, A.B., & Gogate, P.R. (2013). Investigations into ultrasound induced atomization, Ultrasonics Sonochemistry 20: 254-64. https://doi.org/10.1016/j.ultsonch.2012.05.001.
24. Rayleigh, L. (1883). On the crispation of fluid resting upon a vibrating support, Phil. 15: 50–58.
25. Samborska, K. (2022). Innovations in spray drying process for food and pharma industries, Journal of Food Engineering 321: 110960. https://doi.org/10.1016/j.jfoodeng.2022.110960.
26. Tatar Turan, F., Cengiz, A., & Kahyaoglu, T. (2015). Evaluation of ultrasonic nozzle with spray-drying as a novel method for the microencapsulation of blueberry's bioactive compounds, Innovative Food Science & Emerging Technologies 32: 136-45. https://doi.org/10.1016/j.ifset.2015.09.011.
27. Tembely, M., Lecot, C., & Soucemarianadin, A. (2011). Prediction and evolution of drop-size distribution for a new ultrasonic atomizer, Applied Thermal Engineering 31: 656-67. https://doi.org/10.1016/j.applthermaleng.2010.09.027.
28. Vehring, R. (2008). Pharmaceutical particle engineering via spray drying. Pharmaceutical Research 25(5): 999-1022.
29. Walzel, P. (1993). Liquid atomisation, International Chemical Engineering 33: 46-60.
30. Watson, P.D. (1956). Effect of variations in fat and temperature on the surface tension of various milks, Fifty-first Annual Meeting, American Dairy Science Association, Storrs, Connecticut, June 19-21.
31. Wisutmethangoon, S., Plookphol, T., & Sungkhaphaitoon, P. (2011). Production of SAC305 powder by ultrasonic atomization, Powder Technology 209: 105-11. https://doi.org/10.1016/j.powtec.2011.02.016.
32. Yang, Z., Lin, B., Zhang, K., & Lian, Z. (2015). Experimental study on mass transfer performances of the ultrasonic atomization liquid desiccant dehumidification system, Energy and Buildings 93: 126-36. https://doi.org/10.1016/j.enbuild.2015.02.035.
33. Yang, Z., Zhang, K., Yunho, M., & Lian, (2016). Performance investigation on the ultrasonic atomization liquid desiccant regeneration system, Applied Energy 171: 12-25. https://doi.org/10.1016/j.apenergy.2016.03.008.
34. Yang, Z., Zhang, K., Yunho, M., & Lian, (2014). Improvement of the ultrasonic atomization liquid desiccant dehumidification system, Energy and Buildings 85: 145-54. https://doi.org/10.1016/j.enbuild.2014.09.033.
35. Yao, Ye., Wei, L., & Yixiong, H. (2020). Modeling and performance investigation on the counter-flow ultrasonic atomization liquid desiccant regenerator, Applied Thermal Engineering 165: 14573. https://doi.org/10.1016/j.applthermaleng.2019.114573.
36. Ziaee, A. (2020). A rational approach towards spray drying of biopharmaceuticals: The case of lysozyme, Powder Technology 366: 206-215. https://doi.org/10.1016/j.powtec.2020.02.057.
37. Zhang, K., Yang, Z., Lian, Z., & Li, X. (2017). Simulation on regeneration performance for the ultrasonic atomization liquid desiccant system, Procedia Engineering 205: 2925-32. https://doi.org/10.1016/j.proeng.2017.10.101.