Document Type : Research Article

Authors

1 Zoonotic Diseases Research Center, Department of Food Hygiene and Safety, School of Public Health, Shahid Sadoughi University of Medical Sciences, Yazd, Iran

2 Food Hygiene and Quality Control, School of Veterinary Medicine, Shahrekord University, Shahrekord, Iran

3 Research Center of Prevention and Epidemiology of Non-Communicable Disease, Department of Biostatistics and Epidemiology, School of Public Health, Shahid Sadoughi University of Medical Sciences, Yazd, Iran

4 Bioprocessing and Biodetection Lab, Department of Food science and Technology, University of Tehran, Karaj, Iran

Abstract

Background and objective
 It was shown that contamination of agricultural pasturage with fertilizers, application of sewage and effluents in irrigation, use of pesticides and air pollution have led to the entrance of chemical contaminants, including metals, into plants. On the other hand, food processing is (handling, processing, transportation) considered as an important way of food contamination. Vegetable oils are essential in human dietary which is introduced as crucial sources of energy, fat soluble vitamins, and essential fatty acids. Sesamum indicum L., known as sesame seed, has been cultivated in Asian countries from ancient times as vegetable oil for cooking and seasoning ingredients. In recent years, the sesame oil has been considered due to its high antioxidant activities and nutritional properties. Due to the use of sesame seeds extracted oil in two form of ardeh oil and sesame oil, the amounts of mineral elements (phosphorus, potassium, iron, nickel, cobalt, manganese, calcium and magnesium) in sesame seeds and its extracted oils (ardeh oil and refined sesame oil) were investigated.
 
Materials and Methods
 In order to determine the mineral concentration, refined sesame oil and ardeh oils were prepared from an imported sesame seed. In order to prepare the sesame oil, sesame seeds were put into a cold presser and the oil was extracted under low pressure. The Ardeh oil was prepared by adding water to sesame paste in the ratio of 2.2:10 and oil was separated by centrifugation. The sesame seeds and oil samples (refined sesame oil and ardeh oils) were digested by microwave digestion method in presence of 5 ml 65% nitric acid and 2 ml of hydrogen peroxide (H2O2). The digested samples were then filtered through 0.45 µm filter membrane. Then, the concentrations of phosphorus, potassium, iron, nickel, cobalt, manganese, calcium and magnesium in sesame seeds, ardeh oil and refined sesame oil were examined using Inductively Coupled Plasma - Optical Emission Spectroscopy (ICP – OES).
 
Results
 In the present study, the limit of detection (LOD) for each studied mineral elements were determined as nickel: 4 mg/kg, magnesium: 0.00066 mg/kg, manganese: 0.000134 mg/kg, phosphorus: 0.384 mg/kg, cobalt: 0.594 μg / kg, iron: 0.000797 mg/kg, potassium: 0.00394 mg/kg, calcium 0.005 mg/kg. According to the results, the highest amounts of mineral elements were detected in sesame seeds. The achieved results showed that the method of sesame oil extraction can reduce the mineral elements in the final sesame oils. The amounts of mineral elements in sesame seeds were estimated as P > Ca > K > Mg > Fe > Mn > Co > Ni. The pattern of mineral elements in Ardeh oil was reported as P > Fe > K > Co > Mg > Ni > Mn > Ca. The reduction pattern was reported as P > K > Fe > Ni > Co > Mn > Ca > Mg in refined sesame oil. As can be seen the order of mineral elements was changed in two oil samples and sesame seed. It was shown that except for K and Ca, all mineral elements in ardeh oil were higher than refined sesame oil. As can be seen, the refining process was effectively reduced the metals in oil samples. On the other hand, high amount of mineral elements in sesame seed in comparison to extracted oils could be attributed to lack of processing methods which are present in oil production in both methods. 
 
Conclusion
 It should be considered that presence of different metals in vegetable oils could facilitate the oil deterioration and oxidization as well as oil shelf life reduction. Since the most of the sesame lots in Iran are imported, it is necessary to monitor the amount of mineral elements.

Keywords

Main Subjects

©2023 The author(s). This is an open access article distributed under Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source.

  1. Abu-Almaaly, R.A. (2019(. Estimate the contamination by some heavy metals in sesame seeds and Rashi product that available in local markets. Plant Archives, 19, 3217-3222.
  2. Angelova, V., Ivanova, R., & Ivanov, K. (2005). Heavy metal accumulation and distribution in oil crops. Communications in Soil Science and Plant Analysis, 35, 2551-2566. https://doi.org/10.1081/LCSS-200030368
  3. China, S.O. (2014). China’s Maximum Levels for Contaminants in Foods.
  4. Cindric, I.J., Zeiner, M., & Steffan, I. (2007). Trace elemental characterization of edible oils by ICP–AES and GFAAS. Microchemical Journal, 85, 136-139. https://doi.org/10.1016/j.microc.2006.04.011
  5. Commission, C.A. (1999). SECTION 2. Codex standards for fats and oils from vegetable sources.
  6. De Leonardis, A., Macciola, V., & De Felice, M. (2000). Copper and iron determination in edible vegetable oils by graphite furnace atomic absorption spectrometry after extraction with diluted nitric acid. International Journal of Food Science & Technology, 35, 371-375. https://doi.org/10.1046/j.1365-2621.2000.00389.x
  7. Elleuch, M., Besbes, S., Roiseux, O., Blecker, C., & Attia, H. (2007). Quality characteristics of sesame seeds and by-products. Food Chemistry, 103, 641-650. https://doi.org/10.1016/j.foodchem.2006.09.008
  8. Farzin, L., & Moassesi, M.E. (2014). Determination of metal contents in edible vegetable oils produced in Iran using microwave-assisted acid digestion. Journal of Applied Chemical Research, 8, 35-43.
  9. Ghazani, S.M., García-Llatas, G., & Marangoni, A.G. (2013). Minor constituents in canola oil processed by traditional and minimal refining methods. Journal of the American Oil Chemists' Society, 90, 743-756.
  10. (2014). Edible fats and oils – Refined Sesame oil-Specifications and Test methods. Iranian National Standardization Organization, 2nd. Revision.
  11. (2016). Tahini - Specifications and test methods. Iranian National Standardization Organization, 2nd . Revision.
  12. Kamal-Eldin, A., & Appelqvist, L.-Å. (1995). The effects of extraction methods on sesame oil stability. Journal of the American Oil Chemists’ Society, 72, 967-969.
  13. Khalili Sadrabad, E., Moshtaghi Boroujeni, H., & Heydari, A. (2018). Heavy metal accumulation in soybeans cultivated in Iran, 2015-2016. Journal of Nutrition and Food Security, 3, 27-32. http://jnfs.ssu.ac.ir/article-1-126-en.html
  14. Kheirati Rounizi, S., Akrami Mohajeri, F., Moshtaghi Broujeni, H., Pourramezani, F., Jambarsang, S., Kiani, H. & Khalili Sadrabad, E. (2021). The chemical composition and heavy metal content of sesame oil produced by different methods: A risk assessment study. Food Science & Nutrition, 9: 2886–2893 https://doi.org/10.1002/fsn3.2245
  15. Lamas, D.L., Constenla, D.T., & Raab, D. (2016). Effect of degumming process on physicochemical properties of sunflower oil. Biocatalysis and Agricultural Biotechnology, 6, 138-143. https://doi.org/10.1016/j.bcab.2016.03.007
  16. Lamas, D.L., Crapiste, G.H., & Constenla, D.T. (2014). Changes in quality and composition of sunflower oil during enzymatic degumming process. LWT-Food Science and Technology, 58, 71-76. https://doi.org/10.1016/j.lwt.2014.02.024
  17. Makinde, F., & Akinoso, R. (2013). Nutrient composition and effect of processing treatments on anti nutritional factors of Nigerian sesame (Sesamum indicum Linn) cultivars. International Food Research Journal, 20.
  18. Martínez, M.L., Bordón, M.G., Lallana, R.L., Ribotta, P.D., & Maestri, D.M. (2017). Optimization of sesame oil extraction by screw-pressing at low temperature. Food and Bioprocess Technology, 10, 1113-1121. https://doi.org/10.1007/s11947-017-1885-4
  19. Mbaebie, B., Omosun, G., Uti, A., & Oyedemi, S. (2010). Chemical composition of Sesamum indicum (Sesame) grown in Southeastern Nigeria and the physicochemical properties of the seed oil. Seed Science and Biotechnology, 4, 69-72.
  20. Mohammed, F., Abdulwali, N., Guillaume, D., Tenyang, N., Ponka, R., Al-Gadabi, K., Bchitou, R., Abdullah, A.H., & Naji, K.M. (2018). Chemical composition and mineralogical residence of sesame oil from plants grown in different Yemeni environments. Microchemical Journal, 140, 269-277. https://doi.org/10.1016/j.microc.2018.04.011
  21. Mohammed, N.A., & Hassan, S. (2011). Physico-chemical analysis and mineral composition of some sesame seeds (Sesamum indicum) grown in the Gizan area of Saudi Arabia. Journal of Medicinal Plants Research, 5, 270-274.
  22. Nzikou Jm, M.-T. M., Ndangui, Cb., Pambou-Tobi, Np., Kimbonguila, A., Loumouamou, B., Silou, Th., & Desobry, S. (2010). Characterization of seeds and oil of sesame (Sesamum indicum) and the kinetics ofdegradation of the oil during heating. Research Journal of Applied Sciences, Engineering and Technology, 10, 227-32.
  23. Ozkan, A., & Kulak, M. (2013). Effects of water stress on growth, oil yield, fatty acid composition and mineral content of Sesamum indicum. Journal Animal Plant Science, 23, 1686-90.
  24. Pehlivan, E., Arslan, G., Gode, F., Altun, T., & Özcan, M.M. (2008). Determination of some inorganic metals in edible vegetable oils by inductively coupled plasma atomic emission spectroscopy (ICP-AES). Grasas y Aceites, 59(2), 239-44. https://doi.org/10.3989/gya.2008.v59.i3.514
  25. Rahimi, M., Gharachorloo, M., & Ghavami, M. (2020). Determination of some antinutritional factors and heavy metals in sesame oil, raw and peeled sesame (Sesamum indicum) seed of two varieties cultivated in Iran. Food Science and Technology, 17(16), 181-189. http://fsct.modares.ac.ir/article-7-33625-en.html
  26. Ramezani, M., Hashemi, M., Varidi, M., & Rezaie, M. (2021). Health risk assessment and determination of heavy metals in sesame oils. Journal of Nutrition, Fasting and Health, 9, 342-352. https://doi.org/22038/JNFH.2021.61727.1365
  27. Ramezani, M., & Rezaei, M. (2018). Physicochemical properties, heavy metals and aflatoxin in sesame oil: A review study. Journal of Nutrition, Fasting and Health, 6, 45-51. https://doi.org/22038/jnfh.2018.33801.1128
  28. Saeed, F., Qamar, A., Nadeem, M. T., Ahmed, R. S., Arshad, M.S., & Afzaal, M. (2015). Nutritional composition and fatty acid profile of some promisingsesame cultivars. Journal Food Science, 25, 98-103.
  29. Sani, I., Sule, F. A., Warra, A. A., Bello, F., Fakai, I.M., & Abdulhamid, A. (2013). Phytochemicals and mineral elements composition of white Sesamum indicum seed oil. International Journal of Traditional and Natural Medicines, 2, 130.
  30. Sedaghatboroujeni, L., Hojjatoleslamy, M., & Gharachorloo, M. (2017). The effect of purification process on heavy metals in soyabean oil. Journal of Food Technology and Nutrition, 15, 35-44.
  31. Szydłowska-Czerniak, A., Trokowski, K., Karlovits, G.R., & Szłyk, E. (2013). Spectroscopic determination of metals in palm oils from different stages of the technological process. Journal of Agricultural and Food Chemistry, 61, 2276-2283. https://doi.org/10.1021/jf305094s
  32. Tenyang, N., Ponka, R., Tiencheu, B., Djikeng, F.T., Azmeera, T., Karuna, M.S., Prasad, R.B., & Womeni, H.M. (2017). Effects of boiling and roasting on proximate composition, lipid oxidation, fatty acid profile and mineral content of two sesame varieties commercialized and consumed in Far-North Region of Cameroon. Food Chemistry, 221, 1308-1316. https://doi.org/10.1016/j.foodchem.2016.11.025
  33. Zhu, F., Fan, W., Wang, X., Qu, L., & Yao, S. (2011). Health risk assessment of eight heavy metals in nine varieties of edible vegetable oils consumed in China. Food and Chemical Toxicology, 49, 3081-3085. https://doi.org/10.1016/j.fct.2011.09.019

 

 

CAPTCHA Image