Investigating Physical and Mechanical Properties of Bionanocomposite Film Based on Flaxseed Mucilage and Cellulose Nanocrystal

Document Type : Research Article

Authors

• Elham Safaei ¹
• Hannan Lashkari ²
• Sara Ansari ³
• Alireza Shirazinejad ¹

¹ Department of Food Science and Technology, Sarvestan Branch, Islamic Azad University, Sarvestan, Iran

² Department of Food Science and Technology, Zarindasht Branch, Islamic Azad University, Zarindasht, Iran

³ Department of Food Science and Technology, Kazerun Branch, Islamic Azad University, Kazerun, Iran

https://doi.org/10.22067/ifstrj.2023.79467.1214

Abstract

Introduction
 Manufacturers are trying to replace plastic materials in the food packaging industry with biodegradable and edible films. Biodegradable edible films and coatings are mainly made from carbohydrates, lipids and proteins and their mixtures. In recent decades, various carbohydrates from plant sources have been investigated and introduced as new compounds for the preparation of these films. Flaxseed gum is a white to cream-colored powder that dissolves in water and produces a gel, and is a desirable compound for forming films and coatings. Recently, through the integration of reinforcements or fillers with at least one nanometer dimension in the substrate of one or more natural biopolymers, the physicochemical, mechanical, optical, thermal and barrier properties of pure biofilms have been improved. The use of cellulose nanoparticles in biofilms as a reinforcing agent for polymer materials leads to the creation of composite films with better quality characteristics and leads to the creation of functionalization activities in film production. Therefore, the aim of this research was to produce and characterize edible and biodegradable film based on the combination of flaxseed gum and cellulose nanocrystals.
 
Materials and Methods
 Cellulose nanocrystals (Degree of crystallinity: 42% and average particle size: 58 nm) were extracted from cotton linters. Glycerol and other chemicals used for this research were obtained from Merck, Germany. Flaxseeds were purchased from the local market of Shiraz (Iran). Bionanocomposite films were prepared from different ratios (0:100, 30:70, 50:50, 70:30 and 100:0) of flaxseed mucilage (2% w/v) and cellulose nanocrystal (6% w/v) solutions. The prepared solutions were poured on a petri dish with a diameter of 15 cm and dried in an oven at 80°C for 4 hours. Their physical, color and mechanical properties were investigated and the best ratio was selected for the preparation of bionanocomposite film. The produced films were subjected to different analysis to determine thickness, solubility, water absorption capacity, permeability to water vapor, tensile strength, elongation at break point, and colorimetry. The microstructure of the produced film was studied using a scanning electron microscopy (SEM).The average data were analyzed by analysis of variance in a completely randomized design using SPSS 22.0 software. Differences between treatments were expressed in Duncan's multiple range test at the 95% probability level (p<0.05) and the corresponding graphs were drawn with Excel 2013.
 
Results and Discussion
 The results of the film thickness test showed that the film containing 100% mucilage has the lowest thickness and with the addition of cellulose nanocrystals, the thickness increased significantly (p<0.05). The results of the water solubility and water absorption capacity of the film samples showed that the addition of cellulose nanocrystals to the flaxseed mucilage film initially led to a significant decrease in the water solubility and water absorption capacity (p<0.05), so that the lowest level ofthese two physical parameters were obtained in the film containing the combination of 70% flaxseed mucilage and 30% cellulose nanocrystal, and then with the increase of cellulose nanocrystals, an increase in water solubility and water absorption capacity of the films was observed. Nanocrystal cellulose at low levels (30%) acted as a filler and was uniformly dispersed in the network of the film and by filling the empty pores of the biopolymer film based on flaxseed mucilage, it caused the transfer of water vapor more complicated and reduced the permeability to water vapor. However, its higher amount increased the permeability of the film to water vapor.The results showed that by adding cellulose nanocrystal to the film based on flaxseed mucilage and increasing its amount, the brightness of the films decreased and the intensity of redness, yellowness and turbidity of the films increased significantly (p<0.05). By combining flaxseed mucilage and cellulose nanocrystals in a ratio of 30:70, the best film was produced in terms of mechanical strength and stability against moisture and water vapor. The SEM image of this film showed a smooth, even surface and a uniform distribution of cellulose nanocrystals in the film network.
 
Conclusion
 The results finally showed that the combination of flaxseed mucilage and cellulose nanocrystals in a ratio of 30:70 was able to produce a biodegradable and edible film with favorable structural and barrier properties. The characteristics of this film include; thickness (0.313mm), solubility (53.42%), water absorption capacity (44.44%), permeability to water vapor (0.350 g.m^-1s^-1Pa^-1 × 10 ^-10), tensile strength (0.973 MPa), elongation at break point (30.52%) were obtained. The colorimetric indices L*, a*, b* and turbidity were determined as 79.73, 1.95, 3.48 and 1.335 mm^-1 respectively.
 
Acknowledgement
 The authors would like to express their sincere gratitude to Islamic Azad University, Sarvestan Branch.

Keywords

• Biodegradable
• Colorimetry
• Microstructure
• Tensile strength
• Water resistance

Main Subjects

• Food Technology

©2023 The author(s). This is an open access article distributed under Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source.

References

1. Abdollahi, M., Alboofetileh, M., Rezaei, M., & Behrooz, R. (2013). Comparing physico-mechanical and thermal properties of alginate nanocomposite films reinforced with organic and/or inorganic nanofillers. Food Hydrocolloids, 32(2), 416-424. https://doi.org/10.1016/j.foodhyd.2013.02.006
2. Agustin, M.B., Ahmmad, B., De Leon, E.R.P., Buenaobra, J.L., Salazar, J.R., & Hirose, F. (2013). Starch‐based biocomposite films reinforced with cellulose nanocrystals from garlic stalks. Polymer Composites, 34(8), 1325-1332. https://doi.org/10.1002/pc.22546
3. American Society for Testing and Materials (ASTM), (2002). Standard test methods for water vapor transmission of materials (E 96-00). In: Annual book of ASTM Standards (pp. 1048-1053). Philadelphia, PA: American Society for Testing and Materials.
4. American society standard testing and materials (ASTM), (2008). Standard test method for tensile properties of plastics: D 638-08. Philadelphia.
5. Bayzavi, T., Ansari, S., & Danesh, N. (2020). Preparation of composite films from quince seed mucilage and nanocrystalline cellulose and studying their properties. Journal of Food Technology and Nutrition, 17, 93-108.
6. Cao, X., Chen, Y., Chang, P.R., Muir, A.D., & Falk, G. (2008). Starch-based nanocomposites reinforced with flax cellulose nanocrystals. Express Polymer Letters, 2(7), 502-510. https://doi.org/10.3144/expresspolymlett.2008.60
7. Cerqueira, J.C., Penha, J.D.S., Oliveira, R.S., Guarieiro, L.L.N., Melo, P.D.S., Viana, J.D., & Machado, B.A.S. (2017). Production of biodegradable starch nanocomposites using cellulose nanocrystals extracted from coconut fibers. Polímeros, 27, 320-329.
8. Chang, P.R., Jian, R., Zheng, P., Yu, J., & Ma, X. (2010). Preparation and properties of glycerol plasticized-starch (GPS)/cellulose nanoparticle (CN) composites. Carbohydrate Polymers, 79(2), 301-305. https://doi.org/10.1016/j.carbpol.2009.08.007
9. Criado, P., Fraschini, C., Salmieri, S., & Lacroix, M. (2020). Cellulose nanocrystals (CNCs) loaded alginate films against lipid oxidation of chicken breast. Food Research International, 132, 109110. https://doi.org/10.1016/j.foodres.2020.109110
10. Criado, P., Fraschini, C., Shankar, S., Salmieri, S., & Lacroix, M. (2021). Influence of cellulose nanocrystals gellan gum‐based coating on color and respiration rate of Agaricus bisporus mushrooms. Journal of Food Science, 86(2), 420-425. https://doi.org/10.1111/1750-3841.15580
11. de Oliveira Filho, J.G., Albiero, B.R., Cipriano, L., de Oliveira Nobre Bezerra, C.C., Oldoni, F.C.A., Egea, M.B., & Ferreira, M.D. (2021). Arrowroot starch-based films incorporated with a carnauba wax nanoemulsion, cellulose nanocrystals, and essential oils: A new functional material for food packaging applications. Cellulose, 28(10), 6499-6511. https://doi.org/10.1007/s10570-021-03945-0
12. de Souza Coelho, C.C., Silva, R.B.S., Carvalho, C.W.P., Rossi, A.L., Teixeira, J.A., Freitas-Silva, O., & Cabral, L.M.C. (2020). Cellulose nanocrystals from grape pomace and their use for the development of starch-based nanocomposite films. International Journal of Biological Macromolecules, 159, 1048-1061. https://doi.org/10.1016/j.ijbiomac.2020.05.046
13. Diem, L.N., Banerjee, I., Pal, K., Sukatta, U., Rugthaworn, P., & Sukyai, P. (2021). Evaluation in cellulose nanocrystals effectiveness on composite film based wound dressing from poly (vinyl alcohol) and gum tragacanth, https://doi.org/10.21203/rs.3.rs-1094285/v1
14. El Miri, N., Abdelouahdi, K., Barakat, A., Zahouily, M., Fihri, A., Solhy, A., & El Achaby, M. (2015). Bio-nanocomposite films reinforced with cellulose nanocrystals: Rheology of film-forming solutions, transparency, water vapor barrier and tensile properties of films. Carbohydrate Polymers, 129, 156-167. https://doi.org/10.1016/j.carbpol.2015.04.051
15. Espitia, P.J.P., Du, W., de Avena-Bustillos, R.J., de Soares, N.F.F., & McHugh, T.H. (2014). Edible films from pectin: Physical-mechanical and antimicrobial properties: A review. Food Hydrocolloids, 35, 287-296. https://doi.org/10.1016/j.foodhyd.2013.06.005
16. Gohargani, M., Lashkari, H., & Shirazinejad, A. (2020). Study on biodegradable chitosan-whey protein-based film containing bionanocomposite TiO₂ and Zataria multiflora essential oil. Journal of Food Quality, 2020, 8844167. https://doi.org/10.1155/2020/8844167
17. Hernández, C., Pérez-Cabrera, L.E., & González-Martínez, C. (2010). Development of linseed-mucilage edible coatings and its application to extend fresh-cut cucumber shelf-life. In Innovations in Food Science and Food Biotechnology in Developing Countries; AMECA Inc.: Queretaro, Mexico, pp. 321-334.
18. Jensen, A., Lim, L.T., Barbut, S., & Marcone, M. (2015). Development and characterization of soy protein films incorporated with cellulose fibers using a hot surface casting technique. LWT- Food Science and Technology, 60, 162-170. https://doi.org/10.1016/j.lwt.2014.09.027
19. Kumar, P., Sandeep, K.P., Alavi, S., Truong, V.D., & Gorga, R.E. (2010). Preparation and characterization of bio-nanocomposite films based on soy protein isolate and montmorillonite using melt extrusion, Journal of Food Engineering, 100(3), 480-489. https://doi.org/10.1016/j.jfoodeng.2010.04.035
20. Kumar, A., Rao, K.M., & Han, S.S. (2017). Development of sodium alginate-xanthan gum based nanocomposite scaffolds reinforced with cellulose nanocrystals and halloysite nanotubes. Polymer Testing, 63, 214-225. https://doi.org/10.1016/j.polymertesting.2017.08.030
21. Oun, A.A., & Rhim, J.W. (2016). Isolation of cellulose nanocrystals from grain straws and their use for the preparation of carboxymethyl cellulose-based nanocomposite films. Carbohydrate Polymers, 150, 187-200. https://doi.org/10.1016/j.carbpol.2016.05.020
22. Panaitescu, D. M., Frone, A. N., Ghiurea, M. & Chiulan, I. (2015). Influence of storage conditions on starch/PVA films containing cellulose nanofibers. Indian Crop Products, 70, 170-177. https://doi.org/10.1016/j.indcrop.2015.03.028
23. Peng, B.L., Dhar, N., Liu, H.L., & Tam, K.C. (2011). Chemistry and applications of nanocrystalline cellulose and its derivatives: a nanotechnology perspective. Canadian Journal of Chemistry and Engineering, 89, 1191-1206. https://doi.org/10.1002/cjce.20554
24. Prado, N.S., da Silva, I.S.V., Silva, T.A.L., de Oliveira, W.J., de Castro Motta, L.A., Pasquini, D., & Otaguro, H. (2018). Nanocomposite films based on flaxseed gum and cellulose nanocrystals. Materials Research, 21(6), 1-9.
25. Qazanfarzadeh, Z., & Kadivar, M. (2015) Investigation of the effect of cellulose nanocrystal on physical properties of whey protein isolates bionanocomposite films. Innovative Food Technologies, 2(4), 75-85. https://doi.org/10.22104/jift.2015.205
26. Ramos, M., Valdes, A., Beltran, A., & Garrigos, M.C. (2016). Gelatin-based films and coatings for food packaging application: A review. Coatings, 6, 41. https://doi.org/10.3390/coatings6040041
27. Rhim, J.W., Park, H.M., & Ha, C.S. (2013). Bionanocomposites for food packaging applications. Progress Polymer Science, 38, 1629-1652. https://doi.org/10.1016/j.progpolymsci.2013.05.008
28. Roohani, M., Habibi, Y., Belgacem Naceur, M., Ebrahim, G., Karimi, A.N., & Dufresne, A. (2008) Cellulose whiskers reinforced polyvinyl alcohol copolymers nanocomposites. European Polymer Journal, 44: 2489-2498. https://doi.org/10.1016/j.eurpolymj.2008.05.024
29. Sagnelli, D., Hooshmand, K., Kemmer, G.C., Kirkensgaard, J.J.K., Mortensen, K., Giosafatto, C.V.L., Holse, M., Hebelstrup, K.H., Bao, J., & Stelte, W. (2017) Cross-linked amylose bio-plastic: A transgenic-based compostable plastic alternative. International Journal of Molecule Science, 18, 2075. https://doi.org/10.3390/ijms18102075
30. Savadekar, N.R., Karande, V.S., Vigneshwaran, N., Bharimalla, A.K., & Mhaske, S.T., (2012). Preparation of nano cellulose fibers and its application in kappacarrageenan based film. International Journal of Biology and Macromolecules, 51, 1008-1013. https://doi.org/10.1016/j.ijbiomac.2012.08.014
31. Sharmin, N., Khan, R., Salmieri, S., Dussault, D., Bouchard, J., & Lacroix, M. (2012). Mechanical and barrier properties of methylcellulose- based films grafted with trimethylolpropane trimethacrylate by gamma radiation: effect of filling with cellulose nanocrystals. JFOR, 2, 24-31.
32. Stewart, S., & Mazza, G. (2000). Effect of flaxseed gum on quality and stability of a model salad dressing. Journal of Food Quality, 23, 373-390. https://doi.org/10.1111/j.1745-4557.2000.tb00565.x
33. Sukyai, P., Anongjanya, P., Bunyahwuthakul, N., Kongsin, K., Harnkarnsujarit, N., Sukatta, U., & Chollakup, R.J.F.R.I., (2018). Effect of cellulose nanocrystals from sugarcane bagasse on whey protein isolate-based films. Food Research International, 107, 528-535. https://doi.org/10.1016/j.foodres.2018.02.052
34. Tabibloghmany, F., Hojjatoleslamy, M., Farhadian, F., & Ehsandoost, E. (2013). Effect of Linseed (Linum usitatissimum) hydrocolloid as edible coating on decreasing oil absorption in potato chips during Deep-fat frying. International Journal of Agricultural Crop Science, 6, 63-69.
35. Tee, Y., Wong, J., Ching Tan, M., & Talib, R.A. (2017) Development of edible film from flaxseed mucilage. Bioresources, 11, 10286-10295.
36. Teymourpour, Sh., Abdorreza, M.N. & Fariborz, N. (2015) Functional, thermal, and antimicrobial properties of soluble soybean polysaccharide biocomposites reinforced by nano TiO₂. Carbohydrate Polymers, 134, 726-731. https://doi.org/10.1016/j.carbpol.2015.08.073
37. Torabi, Z., & MohammadiNafchi, A. (2013). The effects of SiO₂ nanoparticles on mechanical and physicochemical properties of potato starch films. Journal of Chemical Health Risks, 3(1). https://doi.org/10.22034/jchr.2018.544018
38. Wang, Y., Li, D., Wang, L., Yang, L. & Ozkan, N. (2011). Dynamic mechanical properties of flaxseed gum based edible films. Carbohydrate Polymers, 86, 499-504. https://doi.org/10.1016/j.carbpol.2011.04.079
39. Wardhono, E.Y., Pinem, M.P., Kustiningsih, I., Agustina, S., Oudet, F., Lefebvre, C., & Guénin, E. (2019). Cellulose nanocrystals to improve stability and functional properties of emulsified film based on chitosan nanoparticles and beeswax. Nanomaterials, 9(12), 1707. https://doi.org/10.3390/nano9121707
40. Yan, Q., Hou, H., Guo, P., & Dong, H. (2011). Effects of extrusion and glycerol content on properties of oxidized and acetylated corn starch-based films. Carbohydrate Polymers, 87(1), 707-712. https://doi.org/10.1016/j.carbpol.2011.08.048